Greetings,
I switched from the tiny to the full TCPIP stack as per the 10080 knowledge
base article. However, with the full stack I am unable to contact to hosts
outside my local network. I can ping machines inside my network without any
difficulty.
I use DHCP to configure the NIC.
I have no problems if I go back to the tiny stack.
Any ideas?
]{ristoph
There was a problem with setting the default route via dhcpd
with the big stack. Try:
route change default <ip_of_gateway>.
This should be fixed with the next patch.
-seanb
]{ristoph <news2@kristoph.net> wrote:
: Greetings,
: I switched from the tiny to the full TCPIP stack as per the 10080 knowledge
: base article. However, with the full stack I am unable to contact to hosts
: outside my local network. I can ping machines inside my network without any
: difficulty.
: I use DHCP to configure the NIC.
: I have no problems if I go back to the tiny stack.
: Any ideas?
: ]{ristoph
Sean,
Thanks for your help. You may want to add that to the KB, possibly along
with article 10080.
]{ristoph
“Sean Boudreau” <seanb@qnx.com> wrote in message
news:9807e5$jtm$1@nntp.qnx.com…
There was a problem with setting the default route via dhcpd
with the big stack. Try:
route change default <ip_of_gateway>.
This should be fixed with the next patch.
-seanb
]{ristoph <> news2@kristoph.net> > wrote:
: Greetings,
: I switched from the tiny to the full TCPIP stack as per the 10080
knowledge
: base article. However, with the full stack I am unable to contact to
hosts
: outside my local network. I can ping machines inside my network without
any
: difficulty.
: I use DHCP to configure the NIC.
: I have no problems if I go back to the tiny stack.
: Any ideas?
: ]{ristoph
Hi
Already done 
http://support.qnx.com/support/bok/solution.qnx?10279
Erick.
]{ristoph <news2@kristoph.net> wrote:
Sean,
Thanks for your help. You may want to add that to the KB, possibly along
with article 10080.
]{ristoph
“Sean Boudreau” <> seanb@qnx.com> > wrote in message
news:9807e5$jtm$> 1@nntp.qnx.com> …
There was a problem with setting the default route via dhcpd
with the big stack. Try:
route change default <ip_of_gateway>.
This should be fixed with the next patch.
-seanb
]{ristoph <> news2@kristoph.net> > wrote:
: Greetings,
: I switched from the tiny to the full TCPIP stack as per the 10080
knowledge
: base article. However, with the full stack I am unable to contact to
hosts
: outside my local network. I can ping machines inside my network without
any
: difficulty.
: I use DHCP to configure the NIC.
: I have no problems if I go back to the tiny stack.
: Any ideas?
: ]{ristoph