I just connected an HP 630C printer via USB to RTP. I’m up
to Patch C. I started the Universal driver which seemed to
work. /dev/usb appeared. I than ran the printer driver and
no /dev/usbprn appeared. The command “usb -vvv” shows the
following. Anything I’m missing here?
USB (UHCI) v1.10, v1.00 DDK
Control, Interrupt, Bulk, Isoch, Low speed, High speed
Device Address : 1
Vendor : 0x03f0 (Hewlett-Packard)
Product : 0x2104 (DeskJet 630C)
Device Release : r4.00
USB Spec Release : v1.10
Serial Number : TH0B7F9CB9NZ
Class : 0x00 (Independant per interface)
Max PacketSize0 : 64
Languages : 0x0409 (English)
Current Frame : 474 (1024 bytes)
Configurations : 1
Configuration : 1
Attributes : 0x40 (Self-powered)
Max Power : 2 mA
Interfaces : 1 (with 2 alternate)
Interface : 0 / 0
Class : 0x07 (Printer)
Subclass : 0x01
Protocol : 0x01
Endpoints : 1 + Control
Endpoint : 0
Attributes : Control
Max Packet Size: 64
Endpoint : 1
Attributes : Bulk/OUT
Max Packet Size: 64
Interface : 0 / 1
Class : 0x07 (Printer)
Subclass : 0x01
Protocol : 0x02
Endpoints : 2 + Control
Endpoint : 0
Attributes : Control
Max Packet Size: 64
Endpoint : 1
Attributes : Bulk/OUT
Max Packet Size: 64
Endpoint : 2
Attributes : Bulk/IN
Max Packet Size: 64
Interface : 0 / 2
Class : 0xff (Vendor-specific)
Subclass : 0x00
Protocol : 0xff
Endpoints : 2 + Control
Endpoint : 0
Attributes : Control
Max Packet Size: 64
Endpoint : 1
Attributes : Bulk/OUT
Max Packet Size: 64
Endpoint : 2
Attributes : Bulk/IN
Max Packet Size: 64
\
Mitchell Schoenbrun --------- maschoen@pobox.com