Booting QNQ RTP from 2nd/3rd disk?

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

Hi;

I installed QNX from the CD on its own partition on hd3 on a old Dell (p200
with 64mb) with 95/NT/Linux already installed. Installation seemed to be ok.
On reboot, System Commander (4.03 dlx) detects it correctly as QNX. However,
QNX fails to boot after the initial “press escape” message. The loading
process never ends with …'s.

I swapped the hd0 with another and installed QNX with its bootloader - that
worked verifying hardware compatibility.

Any/all help highly appreciated. TIA.


\

Thanks.
Best Regards.
– Chip (chipnayak@yahoo.com)

2

“Chip Nayak” <chipnayak@yahoo.com> wrote in message
news:9gpfk5$28b$1@inn.qnx.com…

Hi;

I installed QNX from the CD on its own partition on hd3 on a old Dell
(p200
with 64mb) with 95/NT/Linux already installed. Installation seemed to be
ok.
On reboot, System Commander (4.03 dlx) detects it correctly as QNX.
However,
QNX fails to boot after the initial “press escape” message. The loading
process never ends with …'s.

I swapped the hd0 with another and installed QNX with its bootloader -
that
worked verifying hardware compatibility.

6.1 should solve that problem.

Any/all help highly appreciated. TIA.


\

Thanks.
Best Regards.
– Chip (> chipnayak@yahoo.com> )

3

Mario, Hello!

Any news on when QNX 6.1 will be released?

Thanks!


“Mario Charest” <mcharest@deletezinformatic.com> wrote in message
news:9gqfm3$lpp$1@inn.qnx.com…

“Chip Nayak” <> chipnayak@yahoo.com> > wrote in message
news:9gpfk5$28b$> 1@inn.qnx.com> …
Hi;

I installed QNX from the CD on its own partition on hd3 on a old Dell
(p200
with 64mb) with 95/NT/Linux already installed. Installation seemed to be
ok.
On reboot, System Commander (4.03 dlx) detects it correctly as QNX.
However,
QNX fails to boot after the initial “press escape” message. The loading
process never ends with …'s.

I swapped the hd0 with another and installed QNX with its bootloader -
that
worked verifying hardware compatibility.


6.1 should solve that problem.

Any/all help highly appreciated. TIA.


\

Thanks.
Best Regards.
– Chip (> chipnayak@yahoo.com> )
\