IBM Thinkpad with Linksys EC2T

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands there for
the rc.local file and they didn’t work. Mario has been the only one trying
to help, and I think he may be running short on ideas, so I’m hoping this
new thread will be answered by other people with fresh ideas. (Besides get
a new computer…:-\ )

2

“K.King” <software@sagerobot.com> wrote in message
news:9hajpb$fo3$1@inn.qnx.com…

See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do this.

, so I’m hoping this
new thread will be answered by other people with fresh ideas. (Besides
get
a new computer…:-\ )


The on

3

“Mario Charest” <mcharest@zinformatic.com> wrote in message
news:9hcjtt$m7a$1@inn.qnx.com…

“K.King” <> software@sagerobot.com> > wrote in message
news:9hajpb$fo3$> 1@inn.qnx.com> …
See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be
running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do this.

Here is what I found:


Yes, sometimes I have a trouble when I type
http://packages.qnx.com/repository2/ in IE5. Sometimes I get a blank page
“Index of /repository2”, sometimes I get an error message from proxy
“URL:http://localhost.localdomain/repository2 not found…”. But sometimes
I had the luck to look at repository2 from IE5 :slight_smile:. Try to connect to
repository2 exactly and try Refresh button if you get a blank page.

You can moves thoses file to you windows partition (assuming you have
one…)
or on a CD (assuming you have hardware to burn a CD)
then created a repository that points to those files and should be able to
update.


, so I’m hoping this
new thread will be answered by other people with fresh ideas. (Besides
get
a new computer…:-\ )


The on

4

Another thing you can do is ask for the latest CD. It contains
patch B on it. OR you can wait a wee bit longer for 6.1 to be
released and then order a CD. But if you are still only running
patch A then I would definitly try to at least get patch B on
a CD. There were many fixes to devp-pccard from patch A to
patch B. I have also helped someone using a IBM Thinkpad laptop
(I wrote the Knowledge base entry for it) and they had to
run patch B.

Erick.


Mario Charest <mcharest@zinformatic.com> wrote:


“Mario Charest” <> mcharest@zinformatic.com> > wrote in message
news:9hcjtt$m7a$> 1@inn.qnx.com> …

“K.King” <> software@sagerobot.com> > wrote in message
news:9hajpb$fo3$> 1@inn.qnx.com> …
See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be
running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do this.


Here is what I found:



Yes, sometimes I have a trouble when I type
http://packages.qnx.com/repository2/ > in IE5. Sometimes I get a blank page
“Index of /repository2”, sometimes I get an error message from proxy
“URL:> http://localhost.localdomain/repository2 > not found…”. But sometimes
I had the luck to look at repository2 from IE5 > :slight_smile:> . Try to connect to
repository2 exactly and try Refresh button if you get a blank page.

You can moves thoses file to you windows partition (assuming you have
one…)
or on a CD (assuming you have hardware to burn a CD)
then created a repository that points to those files and should be able to
update.



, so I’m hoping this
new thread will be answered by other people with fresh ideas. (Besides
get
a new computer…:-\ )


The on

5

Mario Charest <mcharest@zinformatic.com> wrote:

“Mario Charest” <> mcharest@zinformatic.com> > wrote in message
news:9hcjtt$m7a$> 1@inn.qnx.com> …

“K.King” <> software@sagerobot.com> > wrote in message
news:9hajpb$fo3$> 1@inn.qnx.com> …
See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be
running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do this.


Here is what I found:



Yes, sometimes I have a trouble when I type
http://packages.qnx.com/repository2/ > in IE5. Sometimes I get a blank page
“Index of /repository2”, sometimes I get an error message from proxy
“URL:> http://localhost.localdomain/repository2 > not found…”. But sometimes
I had the luck to look at repository2 from IE5 > :slight_smile:> . Try to connect to
repository2 exactly and try Refresh button if you get a blank page.

You can moves thoses file to you windows partition (assuming you have
one…)
or on a CD (assuming you have hardware to burn a CD)
then created a repository that points to those files and should be able to
update.

When you add a local repository from the drive, make certain it is in
the format:

file:///fs/hd1-dos/…

Erick.



, so I’m hoping this
new thread will be answered by other people with fresh ideas. (Besides
get
a new computer…:-\ )


The on

6

“Hardware Support Account” <hw@qnx.com> wrote in message
news:9hdch8$3c6$1@nntp.qnx.com…

Mario Charest <> mcharest@zinformatic.com> > wrote:

“Mario Charest” <> mcharest@zinformatic.com> > wrote in message
news:9hcjtt$m7a$> 1@inn.qnx.com> …

“K.King” <> software@sagerobot.com> > wrote in message
news:9hajpb$fo3$> 1@inn.qnx.com> …
See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands
there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be
running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do
this.


Here is what I found:


Yes, sometimes I have a trouble when I type
http://packages.qnx.com/repository2/ > in IE5. Sometimes I get a blank
page
“Index of /repository2”, sometimes I get an error message from proxy
“URL:> http://localhost.localdomain/repository2 > not found…”. But
sometimes
I had the luck to look at repository2 from IE5 > :slight_smile:> . Try to connect to
repository2 exactly and try Refresh button if you get a blank page.

You can moves thoses file to you windows partition (assuming you have
one…)
or on a CD (assuming you have hardware to burn a CD)
then created a repository that points to those files and should be able
to
update.

When you add a local repository from the drive, make certain it is in
the format:

file:///fs/hd1-dos/…

Erick.



, so I’m hoping this
new thread will be answered by other people with fresh ideas.
(Besides
get
a new computer…:-\ )


The on


OK, I’m in the process of downloading files. Any particular files I should

be getting? I’m starting by getting all the ones that start with os- I’ll
post the results when I get done.

7

“Hardware Support Account” <hw@qnx.com> wrote in message
news:9hdch8$3c6$1@nntp.qnx.com…

Mario Charest <> mcharest@zinformatic.com> > wrote:

“Mario Charest” <> mcharest@zinformatic.com> > wrote in message
news:9hcjtt$m7a$> 1@inn.qnx.com> …

“K.King” <> software@sagerobot.com> > wrote in message
news:9hajpb$fo3$> 1@inn.qnx.com> …
See previous thread
PCMCIA supported but not detected
for background. I went to the Knowledge DB and used the commands
there
for
the rc.local file and they didn’t work.

Mario has been the only one trying to help, and I think he may be
running
short on ideas

Yes I am:

Only thing left I can think of is to try to get Patch B from windows.
I think I have seen other threads somewhere that explains how to do
this.


Here is what I found:


Yes, sometimes I have a trouble when I type
http://packages.qnx.com/repository2/ > in IE5. Sometimes I get a blank
page
“Index of /repository2”, sometimes I get an error message from proxy
“URL:> http://localhost.localdomain/repository2 > not found…”. But
sometimes
I had the luck to look at repository2 from IE5 > :slight_smile:> . Try to connect to
repository2 exactly and try Refresh button if you get a blank page.

You can moves thoses file to you windows partition (assuming you have
one…)
or on a CD (assuming you have hardware to burn a CD)
then created a repository that points to those files and should be able
to
update.

When you add a local repository from the drive, make certain it is in
the format:

file:///fs/hd1-dos/…

Erick.



, so I’m hoping this
new thread will be answered by other people with fresh ideas.
(Besides
get
a new computer…:-\ )


The on


I installed patch B, no difference. I installed patch C, no difference.

Nothing I do seems to accomplish anything at all. It just doesn’t want to
recognize that card.