hi everybody
I made my own bootable floppy disk
it works very well
procnto with sh ( and some commands ) are in the ram if i understand
good
i’va got a 8 MB HD
after devb-eide ther is " path=0 - eide
target=0 lun=0 dircet-access(0) -
Sandisk SDCFB-8 -rev:"
so my flash disk produced by SANDISK is detected
but i m unable to mount it
how can i do that, it’a 16 bit ide interface
goodweek
cyrille
Hi Cyrille,
You can use the ‘mount’ command or you can use the
automount option to devb-eide. Take a look at
the docs for both, as they will explain what to do.
E.
c.ribstein <c.ribstein@free.fr> wrote:
hi everybody
I made my own bootable floppy disk
it works very well
procnto with sh ( and some commands ) are in the ram if i understand
goodi’va got a 8 MB HD
after devb-eide ther is " path=0 - eide
target=0 lun=0 dircet-access(0) -
Sandisk SDCFB-8 -rev:"so my flash disk produced by SANDISK is detected
but i m unable to mount it
how can i do that, it’a 16 bit ide interfacegoodweek
cyrille