soundcard problem

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

hi,
can’t get soundcard to work. enum-pnpisa detects it, but no sound is
produced (when i use plaympegaudio_noph). phplay and playsound_noph are
giving me “Unable to open device” error.
my soundcard is AZTECH WAVERIDER PRO 3D-32(I) PnP
OS: QNX 6.1.0
output from enum-pnpisa:
#enum-pnpisa
#184341 PNPISA num=1 ioport=277
D184341 bus=isapnp devid=AZT2320 card=1 sernum=3
F184341

thanks.

2

ok, maybe i should provide some more information:
this is an old 486DX4-S 120Mhz box with 16Mb RAM. No PCI, no Pnp bios.
i’ve tried to boot with F6 F6 (dma disabled), and i get following:
mount -Tio-audio -oioport=220,ioport1=,ioport2=,irq=,dma=,dma1=
/lib/dll/deva-ctrl-sb
mount: Can’t mount / (type io-audio)
mount: Posible reason: No such process

any clues?

Aurius wrote:

hi,
can’t get soundcard to work. enum-pnpisa detects it, but no sound is
produced (when i use plaympegaudio_noph). phplay and playsound_noph are
giving me “Unable to open device” error.
my soundcard is AZTECH WAVERIDER PRO 3D-32(I) PnP
OS: QNX 6.1.0
output from enum-pnpisa:
#enum-pnpisa
#184341 PNPISA num=1 ioport=277
D184341 bus=isapnp devid=AZT2320 card=1 sernum=3
F184341

thanks.