Is there anyone out there who has made their laptop run QNXRTP successfully
with a PCMCIA Ethernet interface lnking it to a target processor running a
QNX Neutrino application?
I would very much like to know the details of the PCMCIA Ethernet card and
the driver that enable you to do this. At the moment I am restricted to
using a desktop PC as my QNXRTP host, which is rather limiting.
\
Kind regards
Martin Lloyd
Farside Technology
Home office (most direct), Tel(+ 44)(0) 118 957 4144
Fax (+44)(0)870 0529957
Company Tel: (+44) 175 352 5972
Company Fax (+44) 175 351 1922
Hi Martin,
For a list of supported PCMCIA ethernet adapters please see:
http://qdn.qnx.com/support/hardware/platform/pcmcia.html
Regards,
Erick.
Martin Lloyd <martin@ycmhl.demon.co.uk> wrote:
Is there anyone out there who has made their laptop run QNXRTP successfully
with a PCMCIA Ethernet interface lnking it to a target processor running a
QNX Neutrino application?
I would very much like to know the details of the PCMCIA Ethernet card and
the driver that enable you to do this. At the moment I am restricted to
using a desktop PC as my QNXRTP host, which is rather limiting.
Kind regards
Martin Lloyd
Farside Technology
Home office (most direct), Tel(+ 44)(0) 118 957 4144
Fax (+44)(0)870 0529957
Company Tel: (+44) 175 352 5972
Company Fax (+44) 175 351 1922
“Martin Lloyd” <martin@ycmhl.demon.co.uk> wrote in message
news:a81cd0$lpm$1@inn.qnx.com…
Is there anyone out there who has made their laptop run QNXRTP
successfully
with a PCMCIA Ethernet interface lnking it to a target processor running a
QNX Neutrino application?
I would very much like to know the details of the PCMCIA Ethernet card and
the driver that enable you to do this. At the moment I am restricted to
using a desktop PC as my QNXRTP host, which is rather limiting.
I use succesfully my Dell Latitude CPIt266 with DE-660+ card with QNX6.1,
both TCP/IP and QNET.
Pavol Kycina