[Q] What's error message "Unable mount to /dev/cd ..", Inst

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

hi

my test bed is pentium 4 -2G, adaptec 29160, 73G IBM HDD

I have a problem, when I install qnx6.1

error message : Unabel mount to /dev/cd0

and not progress any more!!!

How to do ??

2

opulence <xenix@jcomm.co.kr> wrote in article <a8bne9$r63$1@inn.qnx.com>…

hi

my test bed is pentium 4 -2G, adaptec 29160, 73G IBM HDD

I have a problem, when I install qnx6.1

error message : Unabel mount to /dev/cd0

That usually means you have no supported CD-ROM drive, or it’s unproperly connected (slave without
master on IDE channel).
p.s. Please do not cross post.

Eduard.
ed1k at ukr dot net


and not progress any more!!!

How to do ??



\

3

Eduard,

There’s a known issue that causes problems when you use an IDE CD drive with
a SCSI disk drive. If this is indeed your case, then using a SCSI CD should
work for you. If it’s not an option (no spare SCSI CD drive laying around),
then perhaps someone at QNX has a workaround for you.

-Warren “been there, done that” Peece



“ed1k” <ed1k@spamerstrap.com> wrote in message
news:01c1da1f$7f8be340$106fa8c0@ED1K…

opulence <> xenix@jcomm.co.kr> > wrote in article
a8bne9$r63$> 1@inn.qnx.com> >…
hi

my test bed is pentium 4 -2G, adaptec 29160, 73G IBM HDD

I have a problem, when I install qnx6.1

error message : Unabel mount to /dev/cd0

That usually means you have no supported CD-ROM drive, or it’s unproperly
connected (slave without
master on IDE channel).
p.s. Please do not cross post.

Eduard.
ed1k at ukr dot net



and not progress any more!!!

How to do ??



\