installation & boot problems

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

in boot after file system detection qnx lock up

message displayed
"
detected EIDE
devb-eide blk auto=partition dos exec=all
Path 0 - EIDE
target 0 lun 0 Direct Access(0) - STxxx
target 1 lun 0 Direct Access(0) - STxxx
Path 1 - EIDE
target 0 lun 0 CDROM(5) ATAPI CDR/W
target 1 lun 0 Direct Access(0) - STxxx

mounting cd filesystem as fs/cd0 on /dev/cd0
mounting dos filesystem as fs/hd2-dos on /dev/hd2t6
mounting dos filesystem as fs/hd2-dos-2 on /dev/hd2t12
mounting dos filesystem as fs/hd1-dos on /dev/hd1t11
"
i attempted with dma & no dma ,boot from cd or floppy or HD, same problem.
no smp.

my config
AK-75 EC KT133A athlon 1 GHz 256 mo

lauduc

2

Hi,

Try “pressing space bar for more options” and putting
system into verbose mode to get more info. Also try disabling
all devices other then EIDE.

When you press the space bar on boot up (when the message is displayed),
you will be presented with a menu, the above to suggestions are options
in the menu.

Regards,

Joe

lauduc <lois.mcmaster@freesbee.fr> wrote:

in boot after file system detection qnx lock up

message displayed
"
detected EIDE
devb-eide blk auto=partition dos exec=all
Path 0 - EIDE
target 0 lun 0 Direct Access(0) - STxxx
target 1 lun 0 Direct Access(0) - STxxx
Path 1 - EIDE
target 0 lun 0 CDROM(5) ATAPI CDR/W
target 1 lun 0 Direct Access(0) - STxxx

mounting cd filesystem as fs/cd0 on /dev/cd0
mounting dos filesystem as fs/hd2-dos on /dev/hd2t6
mounting dos filesystem as fs/hd2-dos-2 on /dev/hd2t12
mounting dos filesystem as fs/hd1-dos on /dev/hd1t11
"
i attempted with dma & no dma ,boot from cd or floppy or HD, same problem.
no smp.

my config
AK-75 EC KT133A athlon 1 GHz 256 mo

lauduc