QNX-6.1.0 P4 install hangs at vesabus.so

The QNX RTP V6.1.0 (from AmigaXL) installation comes to a
complete halt when it attempts to run/load iographics using
the vesabus library:

/usr/photon/bin/devgt-iographics -dldevg-vesabus.so
-I0 -d0x1039,0x6325

VGA Primary: bus 0x0 dev/func 0x40
Secondary: bus 0x1 dev/func 0x0 40
found 2 PCI/AGP display devices


The second message occurs, with VERBOSE install, only after
a PCI nVidia GeForce2 graphics card was added to the machine.

The first message also occured when there was only the onboard SiS VGA
(6325) graphics.

Nothing happens after these messages.

Hi,

First make certain that you are running the latest verison
of the OS (Patch A).

Then get the updated devg-tnt driver from developers.qnx.com

Also try to disable the onboard video, or setup the BIOS to
check/init the PCI video card first.

Regards,

Erick.


J.D. <tradewinds@globaleyes.net> wrote:

The QNX RTP V6.1.0 (from AmigaXL) installation comes to a
complete halt when it attempts to run/load iographics using
the vesabus library:

/usr/photon/bin/devgt-iographics -dldevg-vesabus.so
-I0 -d0x1039,0x6325

VGA Primary: bus 0x0 dev/func 0x40
Secondary: bus 0x1 dev/func 0x0 40
found 2 PCI/AGP display devices



The second message occurs, with VERBOSE install, only after
a PCI nVidia GeForce2 graphics card was added to the machine.

The first message also occured when there was only the onboard SiS VGA
(6325) graphics.

Nothing happens after these messages.