I have a problem with networking on my QNX 6.1.0 system.
When I attempt to access another system (have 3 running 6.1.0) I frequently
(but not always) get the following message
ls: Network dropped connection on reset (.)
a second attempt may or may not work. Frequently the attempts to access
another system via qnet will hang - or fail after a very
long time.
I have dual Intel ethernet cards in each system. I need MULTICASTING enable
on one of the two interfaces (but not the main interface en0)
ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
inet 127.0.0.1 netmask 0xff000000
en0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7a
inet 10.99.30.200 netmask 0xffff0000 broadcast 10.99.255.255
en1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7b
inet 198.103.205.42 netmask 0xfffffff0 broadcast 198.103.205.47
Does anyone have an idea what is going on? I have to resort to using ftp
bwtween the machines (It seems to always work).
This project is nearing an end and I would really like to clean this up…
“Michael Nunan” <m.nunan@ieee.ca> wrote in message
news:adm0u3$mrf$1@inn.qnx.com…
I have a problem with networking on my QNX 6.1.0 system.
When I attempt to access another system (have 3 running 6.1.0) I
frequently
(but not always) get the following message
ls: Network dropped connection on reset (.)
Get 6.2 
a second attempt may or may not work. Frequently the attempts to access
another system via qnet will hang - or fail after a very
long time.
I have dual Intel ethernet cards in each system. I need MULTICASTING
enable
on one of the two interfaces (but not the main interface en0)
ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
inet 127.0.0.1 netmask 0xff000000
en0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7a
inet 10.99.30.200 netmask 0xffff0000 broadcast 10.99.255.255
en1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7b
inet 198.103.205.42 netmask 0xfffffff0 broadcast 198.103.205.47
Does anyone have an idea what is going on? I have to resort to using ftp
bwtween the machines (It seems to always work).
This project is nearing an end and I would really like to clean this up…
\
This project is going into alpha testing soon. When is 6.2 going to be
released as an “official” release? I don’t think that we can go into testing
using a beta version!
“Mario Charest” postmaster@l127.0.0.1 wrote in message
news:admc7l$1h4$1@inn.qnx.com…
“Michael Nunan” <> m.nunan@ieee.ca> > wrote in message
news:adm0u3$mrf$> 1@inn.qnx.com> …
I have a problem with networking on my QNX 6.1.0 system.
When I attempt to access another system (have 3 running 6.1.0) I
frequently
(but not always) get the following message
ls: Network dropped connection on reset (.)
Get 6.2 > 
a second attempt may or may not work. Frequently the attempts to access
another system via qnet will hang - or fail after a very
long time.
I have dual Intel ethernet cards in each system. I need MULTICASTING
enable
on one of the two interfaces (but not the main interface en0)
ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
inet 127.0.0.1 netmask 0xff000000
en0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7a
inet 10.99.30.200 netmask 0xffff0000 broadcast 10.99.255.255
en1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7b
inet 198.103.205.42 netmask 0xfffffff0 broadcast 198.103.205.47
Does anyone have an idea what is going on? I have to resort to using ftp
bwtween the machines (It seems to always work).
This project is nearing an end and I would really like to clean this
up…
\
“Michael Nunan” <m.nunan@ieee.ca> wrote in message
news:adoi6i$lho$1@inn.qnx.com…
This project is going into alpha testing soon. When is 6.2 going to be
released as an “official” release? I don’t think that we can go into
testing
using a beta version!
It’s release under the name Momentics.
“Mario Charest” postmaster@l127.0.0.1 wrote in message
news:admc7l$1h4$> 1@inn.qnx.com> …
“Michael Nunan” <> m.nunan@ieee.ca> > wrote in message
news:adm0u3$mrf$> 1@inn.qnx.com> …
I have a problem with networking on my QNX 6.1.0 system.
When I attempt to access another system (have 3 running 6.1.0) I
frequently
(but not always) get the following message
ls: Network dropped connection on reset (.)
Get 6.2 > 
a second attempt may or may not work. Frequently the attempts to
access
another system via qnet will hang - or fail after a very
long time.
I have dual Intel ethernet cards in each system. I need MULTICASTING
enable
on one of the two interfaces (but not the main interface en0)
ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
inet 127.0.0.1 netmask 0xff000000
en0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7a
inet 10.99.30.200 netmask 0xffff0000 broadcast 10.99.255.255
en1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:03:47:81:ce:7b
inet 198.103.205.42 netmask 0xfffffff0 broadcast
198.103.205.47
Does anyone have an idea what is going on? I have to resort to using
ftp
bwtween the machines (It seems to always work).
This project is nearing an end and I would really like to clean this
up…
\
Mario Charest postmaster@l127.0.0.1 wrote:
“Michael Nunan” <> m.nunan@ieee.ca> > wrote in message
news:adoi6i$lho$> 1@inn.qnx.com> …
This project is going into alpha testing soon. When is 6.2 going to be
released as an “official” release? I don’t think that we can go into
testing
using a beta version!
It’s release under the name Momentics.
On June 4th, 2002 if I may add.
-xtang