i did pin, pin cis and pci -vvv
here are the results
thanks
btw, i know the speedo driver should work for this but it seems only the
tulip driver works, ne2000 freezes the comp. and the rest dont work…
pin
Sock Func Type Flags PID Base Size IRQ
1 Empty ----MF---------- None
1 Empty ----MF---------- None
2 0 Network C—I-±-------- 73741 0x200 16 5
2 Empty ----MF---------- None
pin cis
Socket : 2 - Function : 0
Device : Null
Attribute Device : Null
Card tuple version : 5.00
Manufacturer : Intel
Name of Product : EtherExpress™ PRO/100 PC Card Mobile Adapter16
Add’nl info (lot #) : PRO/100 M16A
Add’nl info (programming): 1.00
Tuple 0x88 link=8 : 00 1a 01 00 00 00 00 00
Manufacturer ID : 0x89 0x10a
Initialization date : 21 Apr 2000 11:37:14
Configuration base/st : 0x800 0-subtuples
Configuration Index : 0x1 Last Default
Interface : MWait Req’d, RdyBsy Active, I/O
Feature : 0xbd
Timing Info : Wait Busy
IO Space : Bus16 Bus8 0x0-0xF
IRQ Description : Pulse Level 2 3 4 5 7 9 10 11 15
Memory Space : 0x0-0xfff
Misc :
PC Card function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=8 : 04 06 00 d0 b7 01 1a ea
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Tuple 0x22 link=2 : 03 01
Tuple 0x22 link=2 : 03 03
Tuple 0x22 link=2 : 05 00
Tuple 0x8a link=12 : 39 30 30 32 36 4a 30 31
: 31 41 45 41
pci -vvv
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1235h, 82437MX Mobile System Controller (MTSC)
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 3200h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 49 00 41 00 00 00 00 10 ca 50 55 00 00 00 00 00
0x60: 02 04 08 08 00 00 00 00 0f 00 00 00 00 00 00 00
0x70: 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00
Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 1234h, 82371MX Mobile PCI I/O IDE Xcelerator (MPIIX)
PCI index = 0h
Class Codes = 068000h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a80h
Command Reg = fh
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations monitor
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 11 00 00 08 00 08 f1
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 0b 0b 00 00 00 00 00 00 00 00 04 00 07 a3 00 00
0x70: 80 00 00 00 00 00 00 01 03 00 00 00 00 00 80 e0
0x80: 00 00 00 00 00 00 00 00 08 08 00 00 00 00 00 00
0x90: 3b 00 e0 15 60 00 00 00 34 05 0f 30 2f 00 00 00
0xA0: 38 05 4f 00 07 00 00 00 f7 03 00 10 00 00 00 00
0xB0: 02 00 00 00 00 02 00 00 00 07 00 00 00 00 08 00
0xC0: 03 40 06 5e 00 00 00 08 00 00 00 00 f0 01 36 00
0xD0: 42 52 93 00 00 00 00 00 00 00 fa 00 00 00 00 00
0xE0: 00 00 00 00 00 00 62 01 ff ff ff 00 00 00 fa 01
0xF0: fe ff ff 00 00 00 00 00 10 0f 00 00 00 00 00 00
Class = Display (VGA)
Vendor ID = 10c8h, Neomagic Corporation
Device ID = 3h, NM2093 MagicGraph 128ZV Video Controller
PCI index = 0h
Class Codes = 030000h
Revision ID = 2h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 280h
Command Reg = 3h
I/O space access enabled
Memory space access enabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = 8000000h prefetchable 32bit length 4194304 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Class = Bridge (PCI/PCMCIA)
Vendor ID = 1013h, Cirrus Logic
Device ID = 1100h, CL-PD6729 PCI-to-PC Card host adapter
PCI index = 0h
Class Codes = 060500h
Revision ID = 7h
Bus number = 0
Device number = 19
Function num = 0
Status Reg = 400h
Command Reg = 83h
I/O space access enabled
Memory space access enabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver enabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 3e0h length 4 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 3
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 07 20 21 00 89 51 14 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:<Voyager.020813075947.1315A@node90.ott.qnx.com>…
Please can you post the output from ‘pin’, ‘pin cis’ as well as the
‘pci -v’ output. What is the make of PCMCIA card that you have?
Thanks, Hugh.
Previously, fd wrote in qdn.public.qnxrtp.installation:
hi
i recently installed qnx on my laptop(ibm thinkpad). for some reason,
after
2 days of effort, i still cant get my network(pcmcia) card up. it seems
to
detect it and everything except but it doesnt create the device file en0
what i do:
slay io-net
io-net -dtulip -ptcpip
#works…
ifconfig en0 10.4.2.16
ifconfig: SIOCGIFFLAGS en0 : No such device or address
i`ve checked pin, and pin cis and everything seems to be ok…
in pci -vvv there is no sign of my my pccard though…
any suggestions?
thanks
patrick
\
i did pin, pin cis and pci -vvv
here are the results
thanks
btw, i know the speedo driver should work for this but it seems only the
tulip driver works, ne2000 freezes the comp. and the rest dont work…
pin
Sock Func Type Flags PID Base Size IRQ
1 Empty ----MF---------- None
1 Empty ----MF---------- None
2 0 Network C—I-±-------- 73741 0x200 16 5
2 Empty ----MF---------- None
pin cis
Socket : 2 - Function : 0
Device : Null
Attribute Device : Null
Card tuple version : 5.00
Manufacturer : Intel
Name of Product : EtherExpress™ PRO/100 PC Card Mobile Adapter16
Add’nl info (lot #) : PRO/100 M16A
Add’nl info (programming): 1.00
Tuple 0x88 link=8 : 00 1a 01 00 00 00 00 00
Manufacturer ID : 0x89 0x10a
Initialization date : 21 Apr 2000 11:37:14
Configuration base/st : 0x800 0-subtuples
Configuration Index : 0x1 Last Default
Interface : MWait Req’d, RdyBsy Active, I/O
Feature : 0xbd
Timing Info : Wait Busy
IO Space : Bus16 Bus8 0x0-0xF
IRQ Description : Pulse Level 2 3 4 5 7 9 10 11 15
Memory Space : 0x0-0xfff
Misc :
PC Card function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=8 : 04 06 00 d0 b7 01 1a ea
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Tuple 0x22 link=2 : 03 01
Tuple 0x22 link=2 : 03 03
Tuple 0x22 link=2 : 05 00
Tuple 0x8a link=12 : 39 30 30 32 36 4a 30 31
: 31 41 45 41
pci -vvv
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1235h, 82437MX Mobile System Controller (MTSC)
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 3200h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 49 00 41 00 00 00 00 10 ca 50 55 00 00 00 00 00
0x60: 02 04 08 08 00 00 00 00 0f 00 00 00 00 00 00 00
0x70: 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00
Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 1234h, 82371MX Mobile PCI I/O IDE Xcelerator (MPIIX)
PCI index = 0h
Class Codes = 068000h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a80h
Command Reg = fh
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations monitor
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 11 00 00 08 00 08 f1
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 0b 0b 00 00 00 00 00 00 00 00 04 00 07 a3 00 00
0x70: 80 00 00 00 00 00 00 01 03 00 00 00 00 00 80 e0
0x80: 00 00 00 00 00 00 00 00 08 08 00 00 00 00 00 00
0x90: 3b 00 e0 15 60 00 00 00 34 05 0f 30 2f 00 00 00
0xA0: 38 05 4f 00 07 00 00 00 f7 03 00 10 00 00 00 00
0xB0: 02 00 00 00 00 02 00 00 00 07 00 00 00 00 08 00
0xC0: 03 40 06 5e 00 00 00 08 00 00 00 00 f0 01 36 00
0xD0: 42 52 93 00 00 00 00 00 00 00 fa 00 00 00 00 00
0xE0: 00 00 00 00 00 00 62 01 ff ff ff 00 00 00 fa 01
0xF0: fe ff ff 00 00 00 00 00 10 0f 00 00 00 00 00 00
Class = Display (VGA)
Vendor ID = 10c8h, Neomagic Corporation
Device ID = 3h, NM2093 MagicGraph 128ZV Video Controller
PCI index = 0h
Class Codes = 030000h
Revision ID = 2h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 280h
Command Reg = 3h
I/O space access enabled
Memory space access enabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = 8000000h prefetchable 32bit length 4194304 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Class = Bridge (PCI/PCMCIA)
Vendor ID = 1013h, Cirrus Logic
Device ID = 1100h, CL-PD6729 PCI-to-PC Card host adapter
PCI index = 0h
Class Codes = 060500h
Revision ID = 7h
Bus number = 0
Device number = 19
Function num = 0
Status Reg = 400h
Command Reg = 83h
I/O space access enabled
Memory space access enabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver enabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 3e0h length 4 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 3
Device Dependent Registers:
0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 07 20 21 00 89 51 14 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.020813075947.1315A@node90.ott.qnx.com…
Please can you post the output from ‘pin’, ‘pin cis’ as well as the
‘pci -v’ output. What is the make of PCMCIA card that you have?
Thanks, Hugh.
Previously, fd wrote in qdn.public.qnxrtp.installation:
hi
i recently installed qnx on my laptop(ibm thinkpad). for some reason,
after
2 days of effort, i still cant get my network(pcmcia) card up. it seems
to
detect it and everything except but it doesnt create the device file en0
what i do:
slay io-net
io-net -dtulip -ptcpip
#works…
ifconfig en0 10.4.2.16
ifconfig: SIOCGIFFLAGS en0 : No such device or address
i`ve checked pin, and pin cis and everything seems to be ok…
in pci -vvv there is no sign of my my pccard though…
any suggestions?
thanks
patrick
\