Hi,
I have installed QNX 6.2 in a dual PentiumIII-MMX 450 Mhz machine. The
system works well but only with one processor.
Then, I have copied the “./boot/fs/qnxbasesmp.ifs” into /.boot and rebooted
the machine. The SMP kernel stops in the boot process. These are the last
lines presented in the verbose mode:
…
Mounting a qnx4 filesystem as /fs/hd0-qnx4 on /dev/hd0t79
scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4, scsi_status=2
o
scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
s=cscsi_interpret_sense
: ASC_MEDIA_NOT_PRESENT =3ascsi_interpret_sense: path=1, target=0, lun=0,
cam_
status=c4, scsi_status=2 o scsi_interpret_sense: error=70, sense=2, asc=3a,
as
cq=0 s=cscsi_interpret_sense: ASC:MEDIA_NOT_PRESENT =3ascsi_interpret_sence:
p
ath=1, target=0, lun=0, cam_status=c4, scsi_status=2 o scsi_interpret_sense:
e
rror=70, sense = 2, asc=3a, ascq=0 s=cscsi_interpret_sense:
ASC_MEDIA_NOT_PRESENT = 3a
(it remains stopped here for ever)
Help?
Thanks!
Carlos Beltran
Carlos,
Make sure that the qnxbasesmp image is OK before you copy that into /.boot.
Perhaps is a good idea to try to build the
image one more time and copy to /.altboot (Alternate boot) in case you run
into the same problem.
Fernando
“Carlos Beltran” <cbeltran@dist.unige.it> wrote in message
news:aprd2e$a19$1@inn.qnx.com…
Hi,
I have installed QNX 6.2 in a dual PentiumIII-MMX 450 Mhz machine. The
system works well but only with one processor.
Then, I have copied the “./boot/fs/qnxbasesmp.ifs” into /.boot and
rebooted
the machine. The SMP kernel stops in the boot process. These are the last
lines presented in the verbose mode:
…
Mounting a qnx4 filesystem as /fs/hd0-qnx4 on /dev/hd0t79
scsi_interpret_sense: path=1, target=0, lun=0, cam_status=c4,
scsi_status=2
o
scsi_interpret_sense: error=70, sense=2, asc=3a, ascq=0
s=cscsi_interpret_sense
: ASC_MEDIA_NOT_PRESENT =3ascsi_interpret_sense: path=1, target=0, lun=0,
cam_
status=c4, scsi_status=2 o scsi_interpret_sense: error=70, sense=2,
asc=3a,
as
cq=0 s=cscsi_interpret_sense: ASC:MEDIA_NOT_PRESENT
=3ascsi_interpret_sence:
p
ath=1, target=0, lun=0, cam_status=c4, scsi_status=2 o
scsi_interpret_sense:
e
rror=70, sense = 2, asc=3a, ascq=0 s=cscsi_interpret_sense:
ASC_MEDIA_NOT_PRESENT = 3a
(it remains stopped here for ever)
Help?
Thanks!
Carlos Beltran