Hi Everyone,
I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and couldn’t
find HOWHO, I don’t know what to do, please help.
Alfee Leung
If it is an NE2000 clone and it is in our enumeration files, the driver
should start automatically. Please post the output from ‘pin’, ‘pin cis’
and ‘ls /dev/io-net’.
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,
I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
Hi Hugh,
I have three cards with me, please advise which one will work in QNX NC 6.2,
3Com 3C575-TX, Dlink DEF-650 and Compaq HNE-300.
The point is are there any documentation to explain some
commands?
The following is the output of “ls /dev/io-net”
ip0 ip_en ipv6_en
The following is portion of the “pin CIS” output from my compaq NIC.
Card tuple version :5.00
Manufacturer :CardBus PC Card
Name of Product :Fast Ethernet CardBus PC Card
Link Target : ‘CIS’
Manufacturer ID : 0x0 0x21b
PC Card Function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Other conditions (com) : 3.3V
Tuple 0x07 link=6 : 11 00 80 01 00 00
Tuple 0x07 link=6 : 82 00 80 01 00 00
Tuple 0x04 link=6 : 03 02 10 00 00 00
Tuple 0x05 link=9 : 01 b8 04 b0 bc 8e 0a fb
: 04
Thanks.
Alfee
“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.030327134559.1682A@node90.ott.qnx.com…
If it is an NE2000 clone and it is in our enumeration files, the driver
should start automatically. Please post the output from ‘pin’, ‘pin cis’
and ‘ls /dev/io-net’.Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and
couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
\
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,
I have three cards with me, please advise which one will work in QNX NC 6.2,
3Com 3C575-TX, Dlink DEF-650 and Compaq HNE-300.
The 3Com 3C575 will work with the devn-el900.so driver. We don’t support
any of the others.
The point is are there any documentation to explain some
commands?The following is the output of “ls /dev/io-net”
ip0 ip_en ipv6_en
The following is portion of the “pin CIS” output from my compaq NIC.Card tuple version :5.00
Manufacturer :CardBus PC Card
Name of Product :Fast Ethernet CardBus PC Card
Link Target : ‘CIS’
Manufacturer ID : 0x0 0x21b
PC Card Function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Other conditions (com) : 3.3V
Tuple 0x07 link=6 : 11 00 80 01 00 00
Tuple 0x07 link=6 : 82 00 80 01 00 00
Tuple 0x04 link=6 : 03 02 10 00 00 00
Tuple 0x05 link=9 : 01 b8 04 b0 bc 8e 0a fb
: 04
Thanks.Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030327134559.1682A@node90.ott.qnx.com> …
If it is an NE2000 clone and it is in our enumeration files, the driver
should start automatically. Please post the output from ‘pin’, ‘pin cis’
and ‘ls /dev/io-net’.Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and
couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
\
Hi Hugh,
I tried to use the command to issue the card, but can’t do it, please advise
me that is it something I did wrong.
slay io-net
io-net -del900 vid=0x101, did=0x5057 -ptcpip
The following is the “pin cis” output of my 3Com card.
Socket : 1 - Function : 0
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) : 001
PC Card function : Network LAN Adapter
POST : 0x1
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) :001
PC Card function : Network LAN Adapter
POST : 0x1
Alfee
“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.030331080145.25512A@node90.ott.qnx.com…
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,I have three cards with me, please advise which one will work in QNX NC
6.2,3Com 3C575-TX, Dlink DEF-650 and Compaq HNE-300.
The 3Com 3C575 will work with the devn-el900.so driver. We don’t support
any of the others.
The point is are there any documentation to explain some
commands?The following is the output of “ls /dev/io-net”
ip0 ip_en ipv6_en
The following is portion of the “pin CIS” output from my compaq NIC.Card tuple version :5.00
Manufacturer :CardBus PC Card
Name of Product :Fast Ethernet CardBus PC Card
Link Target : ‘CIS’
Manufacturer ID : 0x0 0x21b
PC Card Function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Other conditions (com) : 3.3V
Tuple 0x07 link=6 : 11 00 80 01 00 00
Tuple 0x07 link=6 : 82 00 80 01 00 00
Tuple 0x04 link=6 : 03 02 10 00 00 00
Tuple 0x05 link=9 : 01 b8 04 b0 bc 8e 0a fb
: 04
Thanks.Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030327134559.1682A@node90.ott.qnx.com> …
If it is an NE2000 clone and it is in our enumeration files, the
driver
should start automatically. Please post the output from ‘pin’, ‘pin
cis’
and ‘ls /dev/io-net’.Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and
couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
\
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,
I tried to use the command to issue the card, but can’t do it, please advise
me that is it something I did wrong.slay io-net
io-net -del900 vid=0x101, did=0x5057 -ptcpip
You should not have to pass any parameters to io-net. You should just be
able to ‘io-net -del900 -ptcpip’. Also, if you do pass command line
parameters, there must not be any spaces in the command line and also the
Vendor and Device IDs are from the output of the pci utility and not pin.
So for the 3Com 575 you would start io-net as follows:
io-net -del900 vid=0x10b7,did=0x5257 -ptcpip
The following is the “pin cis” output of my 3Com card.
Socket : 1 - Function : 0
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) : 001
PC Card function : Network LAN Adapter
POST : 0x1
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) :001
PC Card function : Network LAN Adapter
POST : 0x1
Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030331080145.25512A@node90.ott.qnx.com> …
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,I have three cards with me, please advise which one will work in QNX NC
6.2,3Com 3C575-TX, Dlink DEF-650 and Compaq HNE-300.
The 3Com 3C575 will work with the devn-el900.so driver. We don’t support
any of the others.
The point is are there any documentation to explain some
commands?The following is the output of “ls /dev/io-net”
ip0 ip_en ipv6_en
The following is portion of the “pin CIS” output from my compaq NIC.Card tuple version :5.00
Manufacturer :CardBus PC Card
Name of Product :Fast Ethernet CardBus PC Card
Link Target : ‘CIS’
Manufacturer ID : 0x0 0x21b
PC Card Function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Other conditions (com) : 3.3V
Tuple 0x07 link=6 : 11 00 80 01 00 00
Tuple 0x07 link=6 : 82 00 80 01 00 00
Tuple 0x04 link=6 : 03 02 10 00 00 00
Tuple 0x05 link=9 : 01 b8 04 b0 bc 8e 0a fb
: 04
Thanks.Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030327134559.1682A@node90.ott.qnx.com> …
If it is an NE2000 clone and it is in our enumeration files, the
driver
should start automatically. Please post the output from ‘pin’, ‘pin
cis’
and ‘ls /dev/io-net’.Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu and
couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
\
Hi Hugh,
thanks for your help, I will try it later.
Alfee
“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.030401080801.30066A@node90.ott.qnx.com…
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,I tried to use the command to issue the card, but can’t do it, please
advise
me that is it something I did wrong.slay io-net
io-net -del900 vid=0x101, did=0x5057 -ptcpip
You should not have to pass any parameters to io-net. You should just be
able to ‘io-net -del900 -ptcpip’. Also, if you do pass command line
parameters, there must not be any spaces in the command line and also the
Vendor and Device IDs are from the output of the pci utility and not pin.
So for the 3Com 575 you would start io-net as follows:io-net -del900 vid=0x10b7,did=0x5257 -ptcpip
The following is the “pin cis” output of my 3Com card.Socket : 1 - Function : 0
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) : 001
PC Card function : Network LAN Adapter
POST : 0x1
Link Target : ‘CIS’
Manufacturer ID : 0x101 0x5057
Tuple 0x04 link=6 : 03 01 00 00 00 00
Tuple 0x05 link=12 : 41 9a 01 b5 1e 01 55 02
: 30 ff ff 01
Tuple 0x07 link=6 : 11 00 40 00 00 00
Card tuple version : 5.00
Manufacturer : 3Com Corporation
Name of Product : 3C575A
Add’nl info (lot #) : Fast EtherLink XL PC Card
Add’nl info (programming) :001
PC Card function : Network LAN Adapter
POST : 0x1
Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030331080145.25512A@node90.ott.qnx.com> …
Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Hugh,I have three cards with me, please advise which one will work in QNX
NC
6.2,3Com 3C575-TX, Dlink DEF-650 and Compaq HNE-300.
The 3Com 3C575 will work with the devn-el900.so driver. We don’t
support
any of the others.
The point is are there any documentation to explain some
commands?The following is the output of “ls /dev/io-net”
ip0 ip_en ipv6_en
The following is portion of the “pin CIS” output from my compaq NIC.Card tuple version :5.00
Manufacturer :CardBus PC Card
Name of Product :Fast Ethernet CardBus PC Card
Link Target : ‘CIS’
Manufacturer ID : 0x0 0x21b
PC Card Function : Network LAN Adapter
POST : 0x0
Tuple 0x22 link=2 : 01 02
Tuple 0x22 link=5 : 02 80 96 98 00
Tuple 0x22 link=5 : 02 00 e1 f5 05
Other conditions (com) : 3.3V
Tuple 0x07 link=6 : 11 00 80 01 00 00
Tuple 0x07 link=6 : 82 00 80 01 00 00
Tuple 0x04 link=6 : 03 02 10 00 00 00
Tuple 0x05 link=9 : 01 b8 04 b0 bc 8e 0a fb
: 04
Thanks.Alfee
“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.030327134559.1682A@node90.ott.qnx.com> …
If it is an NE2000 clone and it is in our enumeration files, the
driver
should start automatically. Please post the output from ‘pin’,
‘pin
cis’
and ‘ls /dev/io-net’.Previously, Alfee Leung wrote in qdn.public.qnxrtp.installation:
Hi Everyone,I am new to QNX, but I have some experience in Linux,
I try to install a NE2000 PCMCIA clone into Laptop,
I don’t know how to start becuase I couldn’t find any help menu
and
couldn’t
find HOWHO, I don’t know what to do, please help.Alfee Leung
\