3com network on dell 5100

QNX Newsgroups (Archives) qdn.public.qnxrtp.installation
1

Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as 3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and nothing
happens. It cant find the devn-el900 driver either. Has anybody had similar
problems. Please let me know if there is a solution.

thanks
vilas

2

Please will you do the following and post the output file to this
conference:

  1. slay devp-pccard
  2. sloginfo -c
  3. devp-pccard -vvv 2> /tmp/file
  4. slay devp-pccard
  5. pci -v >> /tmp/file
  6. sloginfo >> /tmp/file

“Vilas Kumar Chitrakaran” <cvilas@ces.clemson.edu> wrote in message
news:bk720m$npn$1@inn.qnx.com…

Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as 3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and nothing
happens. It cant find the devn-el900 driver either. Has anybody had
similar
problems. Please let me know if there is a solution.

thanks
vilas

3

Sorry about the late reply. Here is the output from the following steps:

  1. slay devp-pccard
  2. sloginfo -c
  3. devp-pccard -vvv 2> /tmp/file
  4. slay devp-pccard
  5. pci -v >> /tmp/file
  6. sloginfo >> /tmp/file

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2560h, Unknown Unknown
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = e4h
Capability ID = 9h
Capabilities = 6105h - 21h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2561h, Unknown Unknown
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 60h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = 30h
I/O Limit = 30h
Secondary Status = 22a0h
Memory Base = e010h
Memory Limit = e010h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c2h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1cc0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c4h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1ce0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cdh, Unknown Unknown
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e0000000h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h
Capability ID = ah
Capabilities = 2080h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 82h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 2280h
Memory Base = e020h
Memory Limit = e020h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 4ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c0h, Unknown Unknown
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
Class Codes = 01018ah
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f800h length 8 enabled
PCI IO Address = fa00h length 4 enabled
PCI IO Address = f900h length 8 enabled
PCI IO Address = fb00h length 4 enabled
PCI IO Address = 2020h length 16 enabled
PCI Mem Address = ffeffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c3h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 2000h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1400h length 256 enabled
PCI IO Address = 1c80h length 64 enabled
PCI Mem Address = e0000c00h 32bit length 512 enabled
PCI Mem Address = e0000800h 32bit length 256 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Communication (DMA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c6h, Unknown Unknown
PCI index = 0h
Class Codes = 070300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 6
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1800h length 256 enabled
PCI IO Address = 1c00h length 128 enabled
Subsystem Vendor ID = 14f1h
Subsystem ID = 5422h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4c57h, Radeon Mobility M6 LW
PCI index = 0h
Class Codes = 030000h
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 386h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 42h
Cache Line Size= 8h un-cacheable
PCI Mem Address = f0000000h prefetchable 32bit length 134217728 enabled
PCI IO Address = 3000h length 256 disabled
PCI Mem Address = e0100000h 32bit length 65536 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 58h
Capability ID = 2h
Capabilities = 20h - 2f000207h
Capability ID = 1h
Capabilities = 602h - 0h

Class = Network (Ethernet)
Vendor ID = 14e4h, Broadcom Corporation
Device ID = 4401h, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 1h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 10h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
PCI Mem Address = e0204000h 32bit length 8192 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = ffc2h - 4000h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac50h, PCI1410 PC card cardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 1h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0207000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 3
Subordinate Bus Number = 3
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 11
Bridge Control = 740h
Subsystem Vendor ID = 12a3h
Subsystem ID = ab01h
Legacy Mode Base Address = 0h
System Control = 449060h
Retry Status = c0h
Card Control = 0h
Device Control = 60h
Buffer Control = 61h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac44h, Unknown Unknown
PCI index = 0h
Class Codes = 060700h
Revision ID = 2h
Bus number = 2
Device number = 4
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0208000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 740h
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Legacy Mode Base Address = 3e0h
System Control = 28449060h
Retry Status = c0h
Card Control = 0h
Device Control = 66h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Serial Bus (FireWire)
Vendor ID = 104ch, Texas Instruments
Device ID = 8029h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0010h
Revision ID = 0h
Bus number = 2
Device number = 4
Function num = 1
Status Reg = 210h
Command Reg = 116h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e0206000h 32bit length 2048 enabled
PCI Mem Address = e0200000h 32bit length 16384 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 4ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 44h
Capability ID = 1h
Capabilities = 7e02h - 0h

Time Sev Major Minor Args
Sep 20 11:07:58 2 8 0 Service cmd 0x22 returned errno 22
Sep 20 11:08:46 5 18 0 GetStatus Socket 0 returned CardState b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 1 returned CardState b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 1 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 2 returned CardState b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 2 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 3 returned CardState c0 -
CtlInd 0 - State 0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 GetSocket Socket 3 returned SCIntMask f0 -
Vcontrol 0 - VppLevels 0 -
VccLevel 1 - CtlInd 0 - State c0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 Socket state c0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:47 2 18 0 devp-pccard: timer_settime error
Sep 20 11:08:47 5 18 0 GetStatus Socket 4 returned CardState 40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 GetSocket Socket 4 returned SCIntMask 30 -
Vcontrol 0 - VppLevels 0 -
VccLevel 2 - CtlInd 0 - State 40 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 Socket state 40
Sep 20 11:08:47 5 18 0 Card Removed
Sep 20 11:08:47 5 18 0 GetStatus Socket 5 returned CardState 40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2






“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bk720m$npn$> 1@inn.qnx.com> …
Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as
3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and nothing
happens. It cant find the devn-el900 driver either. Has anybody had
similar
problems. Please let me know if there is a solution.

thanks
vilas
\

4

This is a weird one! I have never seen a laptop use 2 different CardBus
controllers, one for each socket! This will really confuse devp-pccard, so
that is most probably why your ethernet adapter is not working. We currently
don’t support multiple CardBus controllers.

“Vilas Kumar Chitrakaran” <cvilas@ces.clemson.edu> wrote in message
news:bkhqb1$fd9$1@inn.qnx.com…

Sorry about the late reply. Here is the output from the following steps:

  1. slay devp-pccard
  2. sloginfo -c
  3. devp-pccard -vvv 2> /tmp/file
  4. slay devp-pccard
  5. pci -v >> /tmp/file
  6. sloginfo >> /tmp/file

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2560h, Unknown Unknown
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = e4h
Capability ID = 9h
Capabilities = 6105h - 21h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2561h, Unknown Unknown
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 60h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = 30h
I/O Limit = 30h
Secondary Status = 22a0h
Memory Base = e010h
Memory Limit = e010h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c2h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1cc0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c4h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1ce0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cdh, Unknown Unknown
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e0000000h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h
Capability ID = ah
Capabilities = 2080h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 82h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 2280h
Memory Base = e020h
Memory Limit = e020h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 4ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c0h, Unknown Unknown
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
Class Codes = 01018ah
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f800h length 8 enabled
PCI IO Address = fa00h length 4 enabled
PCI IO Address = f900h length 8 enabled
PCI IO Address = fb00h length 4 enabled
PCI IO Address = 2020h length 16 enabled
PCI Mem Address = ffeffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c3h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 2000h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1400h length 256 enabled
PCI IO Address = 1c80h length 64 enabled
PCI Mem Address = e0000c00h 32bit length 512 enabled
PCI Mem Address = e0000800h 32bit length 256 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Communication (DMA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c6h, Unknown Unknown
PCI index = 0h
Class Codes = 070300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 6
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1800h length 256 enabled
PCI IO Address = 1c00h length 128 enabled
Subsystem Vendor ID = 14f1h
Subsystem ID = 5422h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4c57h, Radeon Mobility M6 LW
PCI index = 0h
Class Codes = 030000h
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 386h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 42h
Cache Line Size= 8h un-cacheable
PCI Mem Address = f0000000h prefetchable 32bit length 134217728 enabled
PCI IO Address = 3000h length 256 disabled
PCI Mem Address = e0100000h 32bit length 65536 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 58h
Capability ID = 2h
Capabilities = 20h - 2f000207h
Capability ID = 1h
Capabilities = 602h - 0h

Class = Network (Ethernet)
Vendor ID = 14e4h, Broadcom Corporation
Device ID = 4401h, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 1h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 10h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
PCI Mem Address = e0204000h 32bit length 8192 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = ffc2h - 4000h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac50h, PCI1410 PC card cardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 1h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0207000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 3
Subordinate Bus Number = 3
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 11
Bridge Control = 740h
Subsystem Vendor ID = 12a3h
Subsystem ID = ab01h
Legacy Mode Base Address = 0h
System Control = 449060h
Retry Status = c0h
Card Control = 0h
Device Control = 60h
Buffer Control = 61h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac44h, Unknown Unknown
PCI index = 0h
Class Codes = 060700h
Revision ID = 2h
Bus number = 2
Device number = 4
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0208000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 740h
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Legacy Mode Base Address = 3e0h
System Control = 28449060h
Retry Status = c0h
Card Control = 0h
Device Control = 66h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Serial Bus (FireWire)
Vendor ID = 104ch, Texas Instruments
Device ID = 8029h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0010h
Revision ID = 0h
Bus number = 2
Device number = 4
Function num = 1
Status Reg = 210h
Command Reg = 116h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e0206000h 32bit length 2048 enabled
PCI Mem Address = e0200000h 32bit length 16384 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 4ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 44h
Capability ID = 1h
Capabilities = 7e02h - 0h

Time Sev Major Minor Args
Sep 20 11:07:58 2 8 0 Service cmd 0x22 returned errno 22
Sep 20 11:08:46 5 18 0 GetStatus Socket 0 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 0 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 1 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 1 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 2 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 2 returned SCIntMask 0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 3 returned CardState
c0 -
CtlInd 0 - State 0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 GetSocket Socket 3 returned SCIntMask
f0 -
Vcontrol 0 - VppLevels 0 -
VccLevel 1 - CtlInd 0 - State c0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 Socket state c0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:47 2 18 0 devp-pccard: timer_settime error
Sep 20 11:08:47 5 18 0 GetStatus Socket 4 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 GetSocket Socket 4 returned SCIntMask
30 -
Vcontrol 0 - VppLevels 0 -
VccLevel 2 - CtlInd 0 - State 40 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 Socket state 40
Sep 20 11:08:47 5 18 0 Card Removed
Sep 20 11:08:47 5 18 0 GetStatus Socket 5 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2







“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bk720m$npn$> 1@inn.qnx.com> …
Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as
3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and nothing
happens. It cant find the devn-el900 driver either. Has anybody had
similar
problems. Please let me know if there is a solution.

thanks
vilas


\

5

Hugh,

Isn’t there some way to give ALL of the information that pccard wants
on the command line so that it won’t have to go searching for it. That
way it would just work with the desired controller.


Vilas Kumar Chitrakaran <cvilas@ces.clemson.edu> wrote:
VKC > No way to disable one of the controllers I suppose. No BIOS settings allow
VKC > me to do that either. Guess I am stuck with four different ethernet
VKC > controllers in my laptop, and none of them work in QNX!

VKC > Thanks
VKC > Vilas

VKC > “Hugh Brown” <hsbrown@qnx.com> wrote in message
VKC > news:bkmoem$l0$1@inn.qnx.com…

This is a weird one! I have never seen a laptop use 2 different CardBus
controllers, one for each socket! This will really confuse devp-pccard, so
that is most probably why your ethernet adapter is not working. We
currently don’t support multiple CardBus controllers.

6

No way to disable one of the controllers I suppose. No BIOS settings allow
me to do that either. Guess I am stuck with four different ethernet
controllers in my laptop, and none of them work in QNX!

Thanks
Vilas

“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:bkmoem$l0$1@inn.qnx.com…

This is a weird one! I have never seen a laptop use 2 different CardBus
controllers, one for each socket! This will really confuse devp-pccard, so
that is most probably why your ethernet adapter is not working. We
currently
don’t support multiple CardBus controllers.

“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bkhqb1$fd9$> 1@inn.qnx.com> …
Sorry about the late reply. Here is the output from the following steps:

  1. slay devp-pccard
  2. sloginfo -c
  3. devp-pccard -vvv 2> /tmp/file
  4. slay devp-pccard
  5. pci -v >> /tmp/file
  6. sloginfo >> /tmp/file

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2560h, Unknown Unknown
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = e4h
Capability ID = 9h
Capabilities = 6105h - 21h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2561h, Unknown Unknown
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 60h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = 30h
I/O Limit = 30h
Secondary Status = 22a0h
Memory Base = e010h
Memory Limit = e010h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c2h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1cc0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c4h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1ce0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cdh, Unknown Unknown
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e0000000h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h
Capability ID = ah
Capabilities = 2080h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 82h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 2280h
Memory Base = e020h
Memory Limit = e020h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 4ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c0h, Unknown Unknown
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
Class Codes = 01018ah
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f800h length 8 enabled
PCI IO Address = fa00h length 4 enabled
PCI IO Address = f900h length 8 enabled
PCI IO Address = fb00h length 4 enabled
PCI IO Address = 2020h length 16 enabled
PCI Mem Address = ffeffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c3h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 2000h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1400h length 256 enabled
PCI IO Address = 1c80h length 64 enabled
PCI Mem Address = e0000c00h 32bit length 512 enabled
PCI Mem Address = e0000800h 32bit length 256 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Communication (DMA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c6h, Unknown Unknown
PCI index = 0h
Class Codes = 070300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 6
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1800h length 256 enabled
PCI IO Address = 1c00h length 128 enabled
Subsystem Vendor ID = 14f1h
Subsystem ID = 5422h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4c57h, Radeon Mobility M6 LW
PCI index = 0h
Class Codes = 030000h
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 386h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 42h
Cache Line Size= 8h un-cacheable
PCI Mem Address = f0000000h prefetchable 32bit length 134217728 enabled
PCI IO Address = 3000h length 256 disabled
PCI Mem Address = e0100000h 32bit length 65536 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 58h
Capability ID = 2h
Capabilities = 20h - 2f000207h
Capability ID = 1h
Capabilities = 602h - 0h

Class = Network (Ethernet)
Vendor ID = 14e4h, Broadcom Corporation
Device ID = 4401h, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 1h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 10h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
PCI Mem Address = e0204000h 32bit length 8192 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = ffc2h - 4000h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac50h, PCI1410 PC card cardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 1h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0207000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 3
Subordinate Bus Number = 3
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 11
Bridge Control = 740h
Subsystem Vendor ID = 12a3h
Subsystem ID = ab01h
Legacy Mode Base Address = 0h
System Control = 449060h
Retry Status = c0h
Card Control = 0h
Device Control = 60h
Buffer Control = 61h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac44h, Unknown Unknown
PCI index = 0h
Class Codes = 060700h
Revision ID = 2h
Bus number = 2
Device number = 4
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0208000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 740h
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Legacy Mode Base Address = 3e0h
System Control = 28449060h
Retry Status = c0h
Card Control = 0h
Device Control = 66h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Serial Bus (FireWire)
Vendor ID = 104ch, Texas Instruments
Device ID = 8029h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0010h
Revision ID = 0h
Bus number = 2
Device number = 4
Function num = 1
Status Reg = 210h
Command Reg = 116h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e0206000h 32bit length 2048 enabled
PCI Mem Address = e0200000h 32bit length 16384 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 4ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 44h
Capability ID = 1h
Capabilities = 7e02h - 0h

Time Sev Major Minor Args
Sep 20 11:07:58 2 8 0 Service cmd 0x22 returned errno 22
Sep 20 11:08:46 5 18 0 GetStatus Socket 0 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 0 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 1 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 1 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 2 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 2 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 3 returned CardState
c0 -
CtlInd 0 - State 0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 GetSocket Socket 3 returned SCIntMask
f0 -
Vcontrol 0 - VppLevels 0 -
VccLevel 1 - CtlInd 0 - State c0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 Socket state c0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:47 2 18 0 devp-pccard: timer_settime error
Sep 20 11:08:47 5 18 0 GetStatus Socket 4 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 GetSocket Socket 4 returned SCIntMask
30 -
Vcontrol 0 - VppLevels 0 -
VccLevel 2 - CtlInd 0 - State 40 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 Socket state 40
Sep 20 11:08:47 5 18 0 Card Removed
Sep 20 11:08:47 5 18 0 GetStatus Socket 5 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2







“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bk720m$npn$> 1@inn.qnx.com> …
Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work
with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as
3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and
nothing
happens. It cant find the devn-el900 driver either. Has anybody had
similar
problems. Please let me know if there is a solution.

thanks
vilas




\

7

I’ll have to take a look at this and see what I can do.

“Vilas Kumar Chitrakaran” <cvilas@ces.clemson.edu> wrote in message
news:bknb0v$d6l$1@inn.qnx.com…

No way to disable one of the controllers I suppose. No BIOS settings allow
me to do that either. Guess I am stuck with four different ethernet
controllers in my laptop, and none of them work in QNX!

Thanks
Vilas

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:bkmoem$l0$> 1@inn.qnx.com> …
This is a weird one! I have never seen a laptop use 2 different CardBus
controllers, one for each socket! This will really confuse devp-pccard,
so
that is most probably why your ethernet adapter is not working. We
currently
don’t support multiple CardBus controllers.

“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bkhqb1$fd9$> 1@inn.qnx.com> …
Sorry about the late reply. Here is the output from the following
steps:

  1. slay devp-pccard
  2. sloginfo -c
  3. devp-pccard -vvv 2> /tmp/file
  4. slay devp-pccard
  5. pci -v >> /tmp/file
  6. sloginfo >> /tmp/file

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2560h, Unknown Unknown
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = e4h
Capability ID = 9h
Capabilities = 6105h - 21h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2561h, Unknown Unknown
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 60h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = 30h
I/O Limit = 30h
Secondary Status = 22a0h
Memory Base = e010h
Memory Limit = e010h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c2h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1cc0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c4h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1ce0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cdh, Unknown Unknown
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e0000000h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h
Capability ID = ah
Capabilities = 2080h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 82h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 2280h
Memory Base = e020h
Memory Limit = e020h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 4ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c0h, Unknown Unknown
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, Unknown Unknown
PCI index = 0h
Class Codes = 01018ah
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f800h length 8 enabled
PCI IO Address = fa00h length 4 enabled
PCI IO Address = f900h length 8 enabled
PCI IO Address = fb00h length 4 enabled
PCI IO Address = 2020h length 16 enabled
PCI Mem Address = ffeffc00h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c3h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 2000h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 24c0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, Unknown Unknown
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1400h length 256 enabled
PCI IO Address = 1c80h length 64 enabled
PCI Mem Address = e0000c00h 32bit length 512 enabled
PCI Mem Address = e0000800h 32bit length 256 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Communication (DMA)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c6h, Unknown Unknown
PCI index = 0h
Class Codes = 070300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 6
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 1800h length 256 enabled
PCI IO Address = 1c00h length 128 enabled
Subsystem Vendor ID = 14f1h
Subsystem ID = 5422h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 10
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Display (VGA)
Vendor ID = 1002h, ATI Technologies
Device ID = 4c57h, Radeon Mobility M6 LW
PCI index = 0h
Class Codes = 030000h
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 386h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 42h
Cache Line Size= 8h un-cacheable
PCI Mem Address = f0000000h prefetchable 32bit length 134217728
enabled
PCI IO Address = 3000h length 256 disabled
PCI Mem Address = e0100000h 32bit length 65536 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 8ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 58h
Capability ID = 2h
Capabilities = 20h - 2f000207h
Capability ID = 1h
Capabilities = 602h - 0h

Class = Network (Ethernet)
Vendor ID = 14e4h, Broadcom Corporation
Device ID = 4401h, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 1h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 10h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
PCI Mem Address = e0204000h 32bit length 8192 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = ffc2h - 4000h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac50h, PCI1410 PC card cardBus Controller
PCI index = 0h
Class Codes = 060700h
Revision ID = 1h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0207000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 3
Subordinate Bus Number = 3
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 11
Bridge Control = 740h
Subsystem Vendor ID = 12a3h
Subsystem ID = ab01h
Legacy Mode Base Address = 0h
System Control = 449060h
Retry Status = c0h
Card Control = 0h
Device Control = 60h
Buffer Control = 61h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac44h, Unknown Unknown
PCI index = 0h
Class Codes = 060700h
Revision ID = 2h
Bus number = 2
Device number = 4
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
ExCA Base Address = e0208000h
Capabilities Pointer = ffh
Secondary Status = ffffh
Primary Bus Number = 2
Secondary Bus Number = 4
Subordinate Bus Number = 4
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = 10
Bridge Control = 740h
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Legacy Mode Base Address = 3e0h
System Control = 28449060h
Retry Status = c0h
Card Control = 0h
Device Control = 66h
Buffer Control = 60h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h

Class = Serial Bus (FireWire)
Vendor ID = 104ch, Texas Instruments
Device ID = 8029h, Unknown Unknown
PCI index = 0h
Class Codes = 0c0010h
Revision ID = 0h
Bus number = 2
Device number = 4
Function num = 1
Status Reg = 210h
Command Reg = 116h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e0206000h 32bit length 2048 enabled
PCI Mem Address = e0200000h 32bit length 16384 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 149h
Max Lat = 4ns
Min Gnt = 2ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 44h
Capability ID = 1h
Capabilities = 7e02h - 0h

Time Sev Major Minor Args
Sep 20 11:07:58 2 8 0 Service cmd 0x22 returned errno 22
Sep 20 11:08:46 5 18 0 GetStatus Socket 0 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 0 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 1 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 1 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 2 returned CardState
b0 -
CtlInd 0 - State 0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 GetSocket Socket 2 returned SCIntMask
0 -
Vcontrol 0 - VppLevels 22 -
VccLevel 2 - CtlInd 0 - State b0 - IREQRouting 0 - IFType 1
Sep 20 11:08:46 5 18 0 Socket state b0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:46 5 18 0 GetStatus Socket 3 returned CardState
c0 -
CtlInd 0 - State 0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 GetSocket Socket 3 returned SCIntMask
f0 -
Vcontrol 0 - VppLevels 0 -
VccLevel 1 - CtlInd 0 - State c0 - IREQRouting cf - IFType 2
Sep 20 11:08:46 5 18 0 Socket state c0
Sep 20 11:08:46 5 18 0 Card Inserted
Sep 20 11:08:46 5 18 0 5.0V Card
Sep 20 11:08:47 2 18 0 devp-pccard: timer_settime error
Sep 20 11:08:47 5 18 0 GetStatus Socket 4 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 GetSocket Socket 4 returned SCIntMask
30 -
Vcontrol 0 - VppLevels 0 -
VccLevel 2 - CtlInd 0 - State 40 - IREQRouting c3 - IFType 2
Sep 20 11:08:47 5 18 0 Socket state 40
Sep 20 11:08:47 5 18 0 Card Removed
Sep 20 11:08:47 5 18 0 GetStatus Socket 5 returned CardState
40 -
CtlInd 0 - State 0 - IREQRouting c3 - IFType 2







“Vilas Kumar Chitrakaran” <> cvilas@ces.clemson.edu> > wrote in message
news:bk720m$npn$> 1@inn.qnx.com> …
Hello,

I am trying to get my dell 5100 laptop running QNX 6.2.1 to work
with
3com/megahertz 3CCFE575BT cardbus PC card which is the same as
3CXFE575BT
claimed to have support under QNX. When my laptop boots up I get
the
following message:

Enumerator error: can’t locate pccard server

After booting I try devp-pccard followed by pccard-launch and
nothing
happens. It cant find the devn-el900 driver either. Has anybody
had
similar
problems. Please let me know if there is a solution.

thanks
vilas






\