qnx4 <-- communicate with --> QRTP how?

Hi…


A few questions about the following:

Is

mount -Tio-net /lib/dll/npm-qnet.so

the same as

io-net -dtulip -pqnet

?? Do I have to start ‘qnet’ before I start npm-qnet.so? If so, how do
I do this??


Basically, I need to see the QRTP machine from QNX4 machine, and vice
versa. Related to this, once all is fine, how would I address the QRTP
machine from QNX4, as //4 (provided QRTP = node4 in QNX4)?? Also, I
have a 4 node license for the QNX4 network, I suppose that we do not
need extra licenses for the QRTP network or do we??

Also, from the QNX4 machine, I update the netmap file, do my
Net.etherXXX & and I see other machines in my netmap file. The
question:

What would be the equivalent on the QRTP machine?? For example, do I
have to tell the QRTP machine who is in node1 (node 1 running QNX4) via
a netmap-like file located somewhere??

Then… I want to be able to see the QNX4 machine from QRTP.

While I understand the concepts behind the technology, I am not quite
sure how
to implement the different commands. For example, when you assume that
qnet was started… how do you do this exactly? Would I see an entry
following a ‘sin’ command? How can I tell what is running? (i.e. ‘sin’
output looks familiar, but with a different unknown flavor’.)


In specific, I need to see the QNX4 machine from the QRTP one, and vice
versa. Any help on this subject is greatly appreciated…

Thanks…

Miguel

Miguel Simon <simon@ou.edu> wrote:

Basically, I need to see the QRTP machine from QNX4 machine, and vice
versa. Related to this, once all is fine, how would I address the QRTP
machine from QNX4, as //4 (provided QRTP = node4 in QNX4)?? Also, I
have a 4 node license for the QNX4 network, I suppose that we do not
need extra licenses for the QRTP network or do we??

Qnet on Neutrino/RtP is not the same as the native netorking on QNX4.
If you want to share filesystems between them you will have to use
nfs.

chris

\

cdm@qnx.com > “The faster I go, the behinder I get.”

Chris McKillop – Lewis Carroll –
Software Engineer, QSSL
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Chris McKillop wrote:

Miguel Simon <> simon@ou.edu> > wrote:

Basically, I need to see the QRTP machine from QNX4 machine, and vice
versa. Related to this, once all is fine, how would I address the QRTP
machine from QNX4, as //4 (provided QRTP = node4 in QNX4)?? Also, I
have a 4 node license for the QNX4 network, I suppose that we do not
need extra licenses for the QRTP network or do we??


Qnet on Neutrino/RtP is not the same as the native netorking on QNX4.
If you want to share filesystems between them you will have to use
nfs.

… or when QNET is open source … port it to QNX4!!

Armin