Hi all,
I,m having troubles getting my pcmcia
(not a winmodem!) pccard modem settings
set properly. I’ve included the necessary
file out puts below for your assistance.
I have noticed that I seem to be getting
2 instances of io-net being reported in
the pidin ar file.
But, whatever the problem/culprit is,
the result is always the same from phdialer…
++++++++++++++++++++++++++++++++++
-
"connection failed" + -
+ -
ANY HELP IS APPRECIATED +
++++++++++++++++++++++++++++++++++
out put from pci:
PCI version = 2.10
Class = Bridge (Host/PCI)
Vendor ID = 1045h, OPTi Inc.
Device ID = c557h, 82C557 CPU Bridge (Viper)
PCI index = 0h
Class Codes = 060000h
Revision ID = 14h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (PCI/ISA)
Vendor ID = 1045h, OPTi Inc.
Device ID = c558h, 82C558 ISA Bridge w/PnP
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 8280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Display (VGA)
Vendor ID = 102ch, Chips And Technologies
Device ID = e0h, 65550 LCD/CRT controller
PCI index = 0h
Class Codes = 030000h
Revision ID = c6h
Bus number = 0
Device number = 6
Function num = 0
Status Reg = 280h
Command Reg = 1c3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Mem Address = c0000000h 32bit length 16777216 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac12h, PCI1130 pc card Cardbus Cntrlr
PCI index = 0h
Class Codes = 060700h
Revision ID = 4h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 200h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = ffeff000h
Capabilities Pointer = 0h
Secondary Status = 0h
Primary Bus Number = 0
Secondary Bus Number = 1
Subordinate Bus Number = 1
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 1
PCI Int Pin = INT A
Interrupt line = no connection
Bridge Control = 4c0h
Subsystem Vendor ID = 0h
Subsystem ID = 0h
Legacy Mode Base Address = 3e0h
System Control = 241020h
Retry Status = 0h
Card Control = 0h
Device Control = 72h
Buffer Control = 0h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Class = Bridge (CardBus)
Vendor ID = 104ch, Texas Instruments
Device ID = ac12h, PCI1130 pc card Cardbus Cntrlr
PCI index = 1h
Class Codes = 060700h
Revision ID = 4h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 200h
Command Reg = 7h
Header type = 2h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
ExCA Base Address = ffefe000h
Capabilities Pointer = 0h
Secondary Status = 0h
Primary Bus Number = 0
Secondary Bus Number = 2
Subordinate Bus Number = 2
Secondary Latency Timer = 20h
Memory Base 0 = 0h
Memory Limit 0 = 0h
Memory Base 1 = 0h
Memory Limit 1 = 0h
I/O Base 0 = 0h
I/O Limit 0 = 0h
I/O Base 1 = 0h
I/O Limit 1 = 0h
PCI Int Pin = 2
PCI Int Pin = INT B
Interrupt line = 0
Bridge Control = 4c0h
Subsystem Vendor ID = 0h
Subsystem ID = 0h
Legacy Mode Base Address = 3e0h
System Control = 41020h
Retry Status = 0h
Card Control = 0h
Device Control = 72h
Buffer Control = 0h
Socket DMA Register 0 = 0h
Socket DMA Register 1 = 0h
Class = Mass Storage (IDE)
Vendor ID = 1045h, OPTi Inc.
Device ID = c621h, 82C621 PCI IDE Controller (PIC)
PCI index = 0h
Class Codes = 010180h
Revision ID = 12h
Bus number = 0
Device number = 20
Function num = 0
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
IO Address = 8000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
+++++++++++++++++++
out put from pidin ar:
pid Arguments
1 (n/a)
2 devc-con -n4
4099 pci-bios
4100 /sbin/tinit -p
4101 devb-eide blk auto=partition cam quiet eide dma eide dma
4102 fs-pkg -a/pkgs/base/safe-config/etc/system/package/packages
8199 slogger
12296 pipe
143369 dumper -d /var/dumps
106506 devb-fdc cam quiet blk auto=partition,cache=100k
94219 devc-pty -n32
94220 mqueue
106509 devc-ser8250 -u1 3f8,4 -u2 2f8,3
94222 io-net -ptcpip -ppppmgr
147471 devp-pccard
151568 devc-ser8250 -u3 0x3e8,7
106513 devc-par -p0x378
528402 pterm
106515 io-net -ptcpip -ppppmgr
417812 pwm
106517 spooler -d/dev/par1
208918 Photon -g -lphlogin “-Sphshutdown -l”
253975 fontsleuth -d /usr/photon/font_repository
462872 shelf
245785 /usr/photon/bin/phfontFA -d /usr/photon/font_repository -j
-s300k
286746 io-graphics -g800x600x24 -dldevg-vesabios.so -I0
-d0x0,0x0528411 /bin/sh
303132 devi-hirun kbd fd -d/dev/kbd ps2 kb -2
499741 bkgdmgr
499742 wmswitch
499743 saver
593952 pidin ar
++++++++++++++++++
out put from pin:
Sock Func Type Flags PID Base Size IRQ
1 0 Serial C—I-±-------- None 0x3e8 8 7
1 Empty ----MF---------- None
2 Empty ----MF---------- None
2 Empty ----MF---------- None
+++++++++++++++++++++++++++++++++++++++++
out put from pin cis:
Socket : 1 - Function : 0
Device : Null
Card tuple version : 5.01
Manufacturer : CIRRUS LOGIC 56K MODEM
Name of Product : CL-MD56XX
Add’nl info (lot #) : 5.41
Manufacturer ID : 0x14e 0x88
PC Card function : Serial Port
POST : 0x1
Configuration base/st : 0x100 0-subtuples
Configuration Index : 0x20 Default
Interface : MWait Req’d, I/O
Feature : 0x9d
Timing Info : Wait
IO Space : Bus8 0x3F8-0x3FF
IRQ Description : Level 4
Misc :
Configuration Index : 0x21
Feature : 0x8
IO Space : Bus8 0x2F8-0x2FF
Configuration Index : 0x22
Feature : 0x8
IO Space : Bus8 0x3E8-0x3EF
Configuration Index : 0x23
Feature : 0x8
IO Space : Bus8 0x2E8-0x2EF
Configuration Index : 0x24
Feature : 0x18
IO Space : Bus8 0x0-0x7(3 lines)
IRQ Description : Level 3 4 5 7 10 11 12
Configuration Index : 0x30 Last
Feature : 0x8
IO Space : Bus8 0x0-0x7(3 lines)
+++++++++++++++++++++++++++++++++++++++++++++++++
out put from pin con:
; socket 1
[device]
manufacturer = “CIRRUS LOGIC 56K MODEM”
product = “CL-MD56XX”
info1 = “5.41”
regbase = 0x100
config = 0x20, 0x0200, irq 4, io 0x3f8-0x3ff (width=8)
config = 0x21, 0x0200, irq 4, io 0x2f8-0x2ff (width=8)
config = 0x22, 0x0200, irq 4, io 0x3e8-0x3ef (width=8)
config = 0x23, 0x0200, irq 4, io 0x2e8-0x2ef (width=8)
config = 0x24, 0x0200, irq 3|4|5|7|10|11|12, io any+8 (width=8)
config = 0x30, 0x0200, irq 4, io any+8 (width=8)
register = 0, 0x40, 0x40 ; level mode interupts
++++++++++++++++++++++++++++++++++++++++++++++++++++
out put from rc.local:
devp-pccard
devc-ser8250 -u3 0x3e8,7