There are lots of people wanting to install QNX on machines that will
run the Patch B or Patch C
if they could get the Patch A .iso release installed first. A new .iso
should include several
boot/install disk images so that all the supported SCSI devices can be
used to install QNX.
Its great that QSSL is releasing frequent updates, but they are no help
at all if you can’t
install QNX at all because the one and only boot/install disk image can
find your SCSI
controller but DOESN’T HAVE the driver on it!
Its a classic “catch 22”, you can fix it after you install it but it has
to be fixed before
you can install it on certain PCs. 
bangs head on desk
My guess is everyone is working on 6.1 and I doubt anything
will be done about Patch A/B/C
“Gregg E.” <gregg@ruralnetwork.net> wrote in message
news:3B1EC6E8.6FE0328D@ruralnetwork.net…
There are lots of people wanting to install QNX on machines that will
run the Patch B or Patch C
if they could get the Patch A .iso release installed first. A new .iso
should include several
boot/install disk images so that all the supported SCSI devices can be
used to install QNX.
Its great that QSSL is releasing frequent updates, but they are no help
at all if you can’t
install QNX at all because the one and only boot/install disk image can
find your SCSI
controller but DOESN’T HAVE the driver on it!
Its a classic “catch 22”, you can fix it after you install it but it has
to be fixed before
you can install it on certain PCs. > > bangs head on desk
On Wed, 06 Jun 2001 18:12:28 -0600, “Gregg E.”
<gregg@ruralnetwork.net> wrote:
PS. The e-mail addres I used to send you the image will expire
soon. For complaints please post or apply the address from this post.
ako
(…)