Hi all,
I’m trying to make my first bootdisk, a very light bootdisk
//---------------------------------------------------------
[virtual=x86,bios +compress] .bootstrap = {
startup-bios
PATH=/proc/boot procnto
}
[+script] .script = {
devc-con -n9 &
reopen /dev/con1
[+session] esh
}
libc.so.1
[data=copy]
devc-con
esh
[type=link] /usr/lib/ldqnx.so.1=/proc/boot/libc.so.1
//---------------------------------------------------------
But at the boot :
Unable to start devc-con(83)
Error 83 means an incorrect shared lib
someone can help ?
Laurent Champon
webmaster@affa.net
Software Engineer
EVS Broadcast
james2
October 29, 2001, 11:00am
2
Which version of QNX are you using? If it’s 6.1 you’ll need to include
libc.so.2 and the link:
[type=link] /usr/lib/ldqnx.so.2=/proc/boot/libc.so.2
Champon Laurent wrote:
Hi all,
I’m trying to make my first bootdisk, a very light bootdisk
//---------------------------------------------------------
[virtual=x86,bios +compress] .bootstrap = {
startup-bios
PATH=/proc/boot procnto
}
[+script] .script = {
devc-con -n9 &
reopen /dev/con1
[+session] esh
}
libc.so.1
[data=copy]
devc-con
esh
[type=link] /usr/lib/ldqnx.so.1=/proc/boot/libc.so.1
//---------------------------------------------------------
But at the boot :
Unable to start devc-con(83)
Error 83 means an incorrect shared lib
someone can help ?
Laurent Champon
webmaster@affa.net
Software Engineer
EVS Broadcast
\
Thank’s.
A other question about the boot image,
If I make a bootdisk and I want to put my own application, averything is ok
but all the code is loaded in memory as well as I dont start the app…
How can I put something in the boot disk without load it in memory ?
Lo
“james” <james.nichols@NOSPAMcamcog.com > a écrit dans le message news:
3BDD36E0.2000109@NOSPAMcamcog.com …
Which version of QNX are you using? If it’s 6.1 you’ll need to include
libc.so.2 and the link:
[type=link] /usr/lib/ldqnx.so.2=/proc/boot/libc.so.2
Champon Laurent wrote:
Hi all,
I’m trying to make my first bootdisk, a very light bootdisk
file://---------------------------------------------------------
[virtual=x86,bios +compress] .bootstrap = {
startup-bios
PATH=/proc/boot procnto
}
[+script] .script = {
devc-con -n9 &
reopen /dev/con1
[+session] esh
}
libc.so.1
[data=copy]
devc-con
esh
[type=link] /usr/lib/ldqnx.so.1=/proc/boot/libc.so.1
file://---------------------------------------------------------
But at the boot :
Unable to start devc-con(83)
Error 83 means an incorrect shared lib
someone can help ?
Laurent Champon
webmaster@affa.net
Software Engineer
EVS Broadcast
\
You may save extra files directly to your floppy disk, but then, you will
have to add all files needed to access your floppy. Or, if you intend to run
on flash, you will have to add files needed to mount your flash as file
system.
Regards,
Ricardo Kazumi Ashikawa
Thank’s.
A other question about the boot image,
If I make a bootdisk and I want to put my own application, averything is
ok
but all the code is loaded in memory as well as I dont start the app…
How can I put something in the boot disk without load it in memory ?
Lo
“james” <> james.nichols@NOSPAMcamcog.com > > a écrit dans le message news:
3BDD36E0.2000109@NOSPAMcamcog.com > …
Which version of QNX are you using? If it’s 6.1 you’ll need to include
libc.so.2 and the link:
[type=link] /usr/lib/ldqnx.so.2=/proc/boot/libc.so.2
Champon Laurent wrote:
Hi all,
I’m trying to make my first bootdisk, a very light bootdisk
file://---------------------------------------------------------
[virtual=x86,bios +compress] .bootstrap = {
startup-bios
PATH=/proc/boot procnto
}
[+script] .script = {
devc-con -n9 &
reopen /dev/con1
[+session] esh
}
libc.so.1
[data=copy]
devc-con
esh
[type=link] /usr/lib/ldqnx.so.1=/proc/boot/libc.so.1
file://---------------------------------------------------------
But at the boot :
Unable to start devc-con(83)
Error 83 means an incorrect shared lib
someone can help ?
Laurent Champon
webmaster@affa.net
Software Engineer
EVS Broadcast
\