Hi,
I need to provide a RAID disk drive for data storage on my QNX-based
computer. Can anyone recommend a RAID drive suitable/compatible for use with
QNX4 and QNX6.
Thanks,
Krupa
Hi,
I need to provide a RAID disk drive for data storage on my QNX-based
computer. Can anyone recommend a RAID drive suitable/compatible for use with
QNX4 and QNX6.
Thanks,
Krupa
We’re using the SentinelRAID 150F on both OS versions. We’ve got something
like 15-18 unites in production… no show stopper problems so far. QNX4
doesn’t like to boot off of SCSI RAID, but QNX6 has no problem. A couple of
the systems are even doing 500Gig each.
-Rob
“Krupa” <seto@vsnl.com> wrote in message news:bm5lt3$mu0$1@inn.qnx.com…
Hi,
I need to provide a RAID disk drive for data storage on my QNX-based
computer. Can anyone recommend a RAID drive suitable/compatible for use
with
QNX4 and QNX6.Thanks,
Krupa
Hi Rob,
I assume you use SCSI, not FibreChannel? Do you know if there’s a way to
connect FC RAID to QNX6 box?
Thnx
“Rob” <rob@spamyouself.com> wrote in message
news:bm95pr$6j6$1@inn.qnx.com…
We’re using the SentinelRAID 150F on both OS versions. We’ve got
something
like 15-18 unites in production… no show stopper problems so far. QNX4
doesn’t like to boot off of SCSI RAID, but QNX6 has no problem. A couple
of
the systems are even doing 500Gig each.-Rob
“Krupa” <> seto@vsnl.com> > wrote in message news:bm5lt3$mu0$> 1@inn.qnx.com> …
Hi,I need to provide a RAID disk drive for data storage on my QNX-based
computer. Can anyone recommend a RAID drive suitable/compatible for use
with
QNX4 and QNX6.Thanks,
Krupa
\
Short answer is no… not really.
I have limited experience with QNX 6. My R & D cohorts around here have
much more experience, and if it was readily available & possible, I’m sure
we’d have a system to play with. FC is definitely in our future plans.
However, I don’t even know if there is a FC SCSI driver available for QNX 6?
Writing your own FC SCSI driver without a Fsys DDK could be challenging
Short of that, I imagine you’d need a RAID Controller with both standard and
FC interfaces… and I haven’t personally explored that possibility. Sorry.
-Rob
“IGor” <ikornetov@yahoo.com> wrote in message
news:bo62j9$hpv$1@inn.qnx.com…
Hi Rob,
I assume you use SCSI, not FibreChannel? Do you know if there’s a way to
connect FC RAID to QNX6 box?Thnx
“Rob” <> rob@spamyouself.com> > wrote in message
news:bm95pr$6j6$> 1@inn.qnx.com> …
www.infortrend.comWe’re using the SentinelRAID 150F on both OS versions. We’ve got
something
like 15-18 unites in production… no show stopper problems so far.
QNX4
doesn’t like to boot off of SCSI RAID, but QNX6 has no problem. A
couple
of
the systems are even doing 500Gig each.-Rob
“Krupa” <> seto@vsnl.com> > wrote in message
news:bm5lt3$mu0$> 1@inn.qnx.com> …
Hi,I need to provide a RAID disk drive for data storage on my
QNX-based
computer. Can anyone recommend a RAID drive suitable/compatible for
use
with
QNX4 and QNX6.Thanks,
Krupa
\