Hi,
In the site web of QNX, I have seen that HP LaserJet printer is supported
till version 4.
Is it still possible to use a 6P somehow?
\
Any help would be appriciated
Qingguo Kou
Qingguo Kou <qingguo@irg.ca> wrote:
Hello,
Hi,
In the site web of QNX, I have seen that HP LaserJet printer is supported
till version 4.
Is it still possible to use a 6P somehow?
The hardware support page says: " The following printers have been tested: ".
I have at home 5L and it works fine, as long as it supports PCL protocol, you
should be fine.
Best Regards,
Marcin
–
Any help would be appriciated
Qingguo Kou
Thank you very much.
I would like ask an another question please: The printer of our department
is attached on a PC under Windows. How can I do remote printing from a PC
under QNX RTP over a ethernet shared by QNX and Windows?
–
Any help would be appriciated
Qingguo Kou
“Tools Mail Account” <tools@qnx.com> a écrit dans le message news:
9m62hq$fjt$2@nntp.qnx.com…
Qingguo Kou <> qingguo@irg.ca> > wrote:
Hello,
Hi,
In the site web of QNX, I have seen that HP LaserJet printer is
supported
till version 4.
Is it still possible to use a 6P somehow?
The hardware support page says: " The following printers have been tested:
".
I have at home 5L and it works fine, as long as it supports PCL protocol,
you
should be fine.
Best Regards,
Marcin
–
Any help would be appriciated
Qingguo Kou
Qingguo Kou <qingguo@irg.ca> wrote:
Thank you very much.
I would like ask an another question please: The printer of our department
is attached on a PC under Windows. How can I do remote printing from a PC
under QNX RTP over a ethernet shared by QNX and Windows?
There is a knowledge base entry that could help you at:
http://qdn.qnx.com/support/bok/solution.qnx?10134
Best Regards,
Marcin
–
Any help would be appriciated
Qingguo Kou
“Tools Mail Account” <> tools@qnx.com> > a écrit dans le message news:
9m62hq$fjt$> 2@nntp.qnx.com> …
Qingguo Kou <> qingguo@irg.ca> > wrote:
Hello,
Hi,
In the site web of QNX, I have seen that HP LaserJet printer is
supported
till version 4.
Is it still possible to use a 6P somehow?
The hardware support page says: " The following printers have been tested:
".
I have at home 5L and it works fine, as long as it supports PCL protocol,
you
should be fine.
Best Regards,
Marcin
–
Any help would be appriciated
Qingguo Kou