Hi all,
We are going to use Code Warrior 2.0 to develop programs for QNX 6.x for x86
targets.
Today we received the Neutrino SDK 2.11, which is needed to connect the
target system with the host system running Code Warrior.
In the installation note, we have read that this SDK does not support
Windows 2000.
Does anybody know a solution to develop with CodeWarrior 2.0 on a Windows
2000 host system?
Regards,
Peter
Peter Knappe <knappe@zess.uni-siegen.de> wrote:
Hi all,
We are going to use Code Warrior 2.0 to develop programs for QNX 6.x for x86
targets.
Today we received the Neutrino SDK 2.11, which is needed to connect the
target system with the host system running Code Warrior.
In the installation note, we have read that this SDK does not support
Windows 2000.
Does anybody know a solution to develop with CodeWarrior 2.0 on a Windows
2000 host system?
It says that probably because there was none or limited testing performed
on Win2K. Did you installed it? What kind of problems do you have?
One of them could be temporary directory set to directory with “spaces” ie.
“c:/blah blah” it should be set to something like “c:/blah”.
If you want to develp programs for QNX 6.1 you should get Windows SDK 6.1
(Dinkum libs), Windows SDK 2.11 will allow you to write apps for QNX RTP 6.0/A/B/C.
I don’t believe there is a released version of Code Warrior that works
with Windows SDK 6.1, but you can ask Metrowerks to send you a beta release.
To receive the latest CodeWarrior for QNX cd, you must contact
mw_qnxbeta@metroworks.com and go through the Metrowerks beta process.
Regards,
Marcin
Regards,
Peter
Hi Marcin,
we asked the German QNX office for the Windows SDK 6.1 and they told us,
that such a SDK is not available.
Furthermore they informed us, that a CodeWarrior patch will be available in
about three weeks ant this patch will
solve all compatibility issues. Are these information correct? If not, where
can we get the Windows SDK 6.1?
Best regards,
Peter
“Tools Mail Account” <tools@qnx.com> schrieb im Newsbeitrag
news:9n5tv5$ba3$1@nntp.qnx.com…
Peter Knappe <> knappe@zess.uni-siegen.de> > wrote:
Hi all,
We are going to use Code Warrior 2.0 to develop programs for QNX 6.x for
x86
targets.
Today we received the Neutrino SDK 2.11, which is needed to connect the
target system with the host system running Code Warrior.
In the installation note, we have read that this SDK does not support
Windows 2000.
Does anybody know a solution to develop with CodeWarrior 2.0 on a
Windows
2000 host system?It says that probably because there was none or limited testing performed
on Win2K. Did you installed it? What kind of problems do you have?
One of them could be temporary directory set to directory with “spaces”
ie.
“c:/blah blah” it should be set to something like “c:/blah”.If you want to develp programs for QNX 6.1 you should get Windows SDK 6.1
(Dinkum libs), Windows SDK 2.11 will allow you to write apps for QNX RTP
6.0/A/B/C.
I don’t believe there is a released version of Code Warrior that works
with Windows SDK 6.1, but you can ask Metrowerks to send you a beta
release.
To receive the latest CodeWarrior for QNX cd, you must contact
mw_qnxbeta@metroworks.com > and go through the Metrowerks beta process.Regards,
Marcin
Regards,
Peter
Peter Knappe <knappe@zess.uni-siegen.de> wrote:
Hello Peter,
Hi Marcin,
we asked the German QNX office for the Windows SDK 6.1 and they told us,
that such a SDK is not available.
Furthermore they informed us, that a CodeWarrior patch will be available in
about three weeks ant this patch will
solve all compatibility issues. Are these information correct? If not, where
can we get the Windows SDK 6.1?
I sent you email.
Regards,
Marcin
Best regards,
Peter
“Tools Mail Account” <> tools@qnx.com> > schrieb im Newsbeitrag
news:9n5tv5$ba3$> 1@nntp.qnx.com> …
Peter Knappe <> knappe@zess.uni-siegen.de> > wrote:
Hi all,
We are going to use Code Warrior 2.0 to develop programs for QNX 6.x for
x86
targets.
Today we received the Neutrino SDK 2.11, which is needed to connect the
target system with the host system running Code Warrior.
In the installation note, we have read that this SDK does not support
Windows 2000.
Does anybody know a solution to develop with CodeWarrior 2.0 on a
Windows
2000 host system?It says that probably because there was none or limited testing performed
on Win2K. Did you installed it? What kind of problems do you have?
One of them could be temporary directory set to directory with “spaces”
ie.
“c:/blah blah” it should be set to something like “c:/blah”.If you want to develp programs for QNX 6.1 you should get Windows SDK 6.1
(Dinkum libs), Windows SDK 2.11 will allow you to write apps for QNX RTP
6.0/A/B/C.
I don’t believe there is a released version of Code Warrior that works
with Windows SDK 6.1, but you can ask Metrowerks to send you a beta
release.
To receive the latest CodeWarrior for QNX cd, you must contact
mw_qnxbeta@metroworks.com > and go through the Metrowerks beta process.Regards,
Marcin
Regards,
Peter