Hi !
I have internal modem Zoltrix VSP 33,4 kbit (Rockwel chip) which works with
Linux and Windows. It is configured as COM 4, IRQ 3, IO 2E8.
In QNX RTP 6.1 (6.0 too) i try the following:
slay devc-ser8250
devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 3e8,4 -u4 2e8,3 &
then I try to connect (with opened terminal window),
computer sends:
ATZ
after few seconds I get
NO CONNECTION
In linux termial window looks:
ATZ
OK
ATM0L0
OK
ATDT0202122
CONNECT11520
How to fix the problem?
Darek Borkowski
Darek Borkowski <borkows@uci.agh.edu.pl> wrote:
Hi !
I have internal modem Zoltrix VSP 33,4 kbit (Rockwel chip) which works with
Linux and Windows. It is configured as COM 4, IRQ 3, IO 2E8.
In QNX RTP 6.1 (6.0 too) i try the following:slay devc-ser8250
devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 3e8,4 -u4 2e8,3 &then I try to connect (with opened terminal window),
computer sends:
ATZ
after few seconds I get
NO CONNECTIONIn linux termial window looks:
ATZ
OK
ATM0L0
OK
ATDT0202122
CONNECT11520How to fix the problem?
Is your PnP setting in BIOS disabled?
Regards,
Marcin
Darek Borkowski
Tools Mail Account wrote:
Darek Borkowski <> borkows@uci.agh.edu.pl> > wrote:
Hi !I have internal modem Zoltrix VSP 33,4 kbit (Rockwel chip) which works
with Linux and Windows. It is configured as COM 4, IRQ 3, IO 2E8.
In QNX RTP 6.1 (6.0 too) i try the following:slay devc-ser8250
devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 3e8,4 -u4 2e8,3 &then I try to connect (with opened terminal window),
computer sends:
ATZ
after few seconds I get
NO CONNECTIONIn linux termial window looks:
ATZ
OK
ATM0L0
OK
ATDT0202122
CONNECT11520How to fix the problem?
Is your PnP setting in BIOS disabled?
Regards,
Marcin
Darek Borkowski
No, I don’t think so. Is it necessery to turn off whole PnP in BIOS?
I’ll try it.
Thanks
Darek
Darek:
I have a US Robotics 56k ISA working fine in Linux and Windows, after some
days with the same trouble i have finded my solution.
Go to your bios setup (“del” key, or “ctrl-alt-s”, “ctrl-alt-f1”,
“ctrl-alt-f10”, “ctrl-alt-esc”, F10…), in my setup this is done pressing
the “del” key on the boot-up.
Go to your “plug and play setup” and try disabling “pnp bios os”.
This solution work fine for me!.
Walter
“Darek Borkowski” <borkows@uci.agh.edu.pl> escribió en el mensaje
news:9kmvi1$r8k$2@inn.qnx.com…
Hi !
I have internal modem Zoltrix VSP 33,4 kbit (Rockwel chip) which works
with
Linux and Windows. It is configured as COM 4, IRQ 3, IO 2E8.
In QNX RTP 6.1 (6.0 too) i try the following:slay devc-ser8250
devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 3e8,4 -u4 2e8,3 &then I try to connect (with opened terminal window),
computer sends:
ATZ
after few seconds I get
NO CONNECTIONIn linux termial window looks:
ATZ
OK
ATM0L0
OK
ATDT0202122
CONNECT11520How to fix the problem?
Darek Borkowski
Hello World!
I found solution! I had turnode off PnP OS INSTALLED but it is not enough.
I hed to disable serial 2 in my BIOS. Now modem works beatiful
thanks
Darek
Walter wrote:
Darek:
I have a US Robotics 56k ISA working fine in Linux and Windows, after some
days with the same trouble i have finded my solution.
Go to your bios setup (“del” key, or “ctrl-alt-s”, “ctrl-alt-f1”,
“ctrl-alt-f10”, “ctrl-alt-esc”, F10…), in my setup this is done pressing
the “del” key on the boot-up.
Go to your “plug and play setup” and try disabling “pnp bios os”.
This solution work fine for me!.Walter
“Darek Borkowski” <> borkows@uci.agh.edu.pl> > escribió en el mensaje
news:9kmvi1$r8k$> 2@inn.qnx.com> …
Hi !I have internal modem Zoltrix VSP 33,4 kbit (Rockwel chip) which works
with
Linux and Windows. It is configured as COM 4, IRQ 3, IO 2E8.
In QNX RTP 6.1 (6.0 too) i try the following:slay devc-ser8250
devc-ser8250 -u1 3f8,4 -u2 2f8,3 -u3 3e8,4 -u4 2e8,3 &then I try to connect (with opened terminal window),
computer sends:
ATZ
after few seconds I get
NO CONNECTIONIn linux termial window looks:
ATZ
OK
ATM0L0
OK
ATDT0202122
CONNECT11520How to fix the problem?
Darek Borkowski
\