I’ve got problems with stability of Photon 1.13 running QNX 4.25D on Toshiba
Satellite Pro 4300
(graphics controler - S3 Savage/IX-MV rev 17 with 8MB RAM, 14’ TFT display,
320M ram).
Photon 1.13 ( without patches ) works very well with Pg.flat* drivers. But
sometimes screen is unexpectedly freezing.
I can ditto from another node ( open pterms, start programs), but the screen
doesn’t change.
I’ve installed Patch C. Nothing changed, but I’ve got more Problems (
appbuilder hangups ).
crt.node first line:
Hydra.ms -S -i0x4117 -s0x0001,0x0000 -r;Pg.flatdc -HC0x00010000
-HNqnx/crt -g1024x768x16 -A0xF0000000,0x800000
-WB2048;#1024,768,16,100,1,flatdc - VGA hi-color
Is it possible to use Pg.s3_savage ( graphics-1.14 B -Patch ) with Photon
1.13 ?
Gerald
Hi Gerald
Gerald Aichwalder <gerald.aichwalder@lottery.co.at> wrote:
I’ve got problems with stability of Photon 1.13 running QNX 4.25D on Toshiba
Satellite Pro 4300
(graphics controler - S3 Savage/IX-MV rev 17 with 8MB RAM, 14’ TFT display,
320M ram).
Photon 1.13 ( without patches ) works very well with Pg.flat* drivers. But
sometimes screen is unexpectedly freezing.
I can ditto from another node ( open pterms, start programs), but the screen
doesn’t change.
What is the output of “sin” when you ditto in from another node?
I’ve installed Patch C. Nothing changed, but I’ve got more Problems (
appbuilder hangups ).
crt.node first line:
Hydra.ms -S -i0x4117 -s0x0001,0x0000 -r;Pg.flatdc -HC0x00010000
-HNqnx/crt -g1024x768x16 -A0xF0000000,0x800000
-WB2048;#1024,768,16,100,1,flatdc - VGA hi-color
Is it possible to use Pg.s3_savage ( graphics-1.14 B -Patch ) with Photon
1.13 ?
No its not.
Gerald
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 987k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 10r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r RECV 0 32k 77k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 1454 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 58 //5//photon/bin/Photon 10r RECV 0 77k 28k
0 62 //5//bin/phfontpfr 10r RECV 0 106k 380k
0 67 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 69 //5/bin/ksh 10o WAIT -1 94k 45k
0 70 //5//drivers/Pg.flatdc 12r REPLY 58 110k 122k
1 71 //5/*/bin/phlogin 10r RECV 0 24k 61k
0 79 //5/bin/Input 12o RECV 0 30k 28k
0 83 //5/bin/Input 10o RECV 0 30k 28k
2 1455 //5/bin/sin 10o REPLY 1 45k 49k
Hardware Support Account <hw@qnx.com> schrieb in im Newsbeitrag:
98o3tm$o9s$1@nntp.qnx.com…
Hi Gerald
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
I’ve got problems with stability of Photon 1.13 running QNX 4.25D on
Toshiba
Satellite Pro 4300
(graphics controler - S3 Savage/IX-MV rev 17 with 8MB RAM, 14’ TFT
display,
320M ram).
Photon 1.13 ( without patches ) works very well with Pg.flat* drivers.
But
sometimes screen is unexpectedly freezing.
I can ditto from another node ( open pterms, start programs), but the
screen
doesn’t change.
What is the output of “sin” when you ditto in from another node?
I’ve installed Patch C. Nothing changed, but I’ve got more Problems (
appbuilder hangups ).
crt.node first line:
Hydra.ms -S -i0x4117 -s0x0001,0x0000 -r;Pg.flatdc -HC0x00010000
-HNqnx/crt -g1024x768x16 -A0xF0000000,0x800000
-WB2048;#1024,768,16,100,1,flatdc - VGA hi-color
Is it possible to use Pg.s3_savage ( graphics-1.14 B -Patch ) with
Photon
1.13 ?
No its not.
Gerald
\
Is this when the graphics seem to have locked up?
Erick.
Gerald Aichwalder <gerald.aichwalder@lottery.co.at> wrote:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 987k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 10r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r RECV 0 32k 77k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 1454 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 58 //5//photon/bin/Photon 10r RECV 0 77k 28k
0 62 //5//bin/phfontpfr 10r RECV 0 106k 380k
0 67 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 69 //5/bin/ksh 10o WAIT -1 94k 45k
0 70 //5//drivers/Pg.flatdc 12r REPLY 58 110k 122k
1 71 //5/*/bin/phlogin 10r RECV 0 24k 61k
0 79 //5/bin/Input 12o RECV 0 30k 28k
0 83 //5/bin/Input 10o RECV 0 30k 28k
2 1455 //5/bin/sin 10o REPLY 1 45k 49k
Hardware Support Account <> hw@qnx.com> > schrieb in im Newsbeitrag:
98o3tm$o9s$> 1@nntp.qnx.com> …
Hi Gerald
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
I’ve got problems with stability of Photon 1.13 running QNX 4.25D on
Toshiba
Satellite Pro 4300
(graphics controler - S3 Savage/IX-MV rev 17 with 8MB RAM, 14’ TFT
display,
320M ram).
Photon 1.13 ( without patches ) works very well with Pg.flat* drivers.
But
sometimes screen is unexpectedly freezing.
I can ditto from another node ( open pterms, start programs), but the
screen
doesn’t change.
What is the output of “sin” when you ditto in from another node?
I’ve installed Patch C. Nothing changed, but I’ve got more Problems (
appbuilder hangups ).
crt.node first line:
Hydra.ms -S -i0x4117 -s0x0001,0x0000 -r;Pg.flatdc -HC0x00010000
-HNqnx/crt -g1024x768x16 -A0xF0000000,0x800000
-WB2048;#1024,768,16,100,1,flatdc - VGA hi-color
Is it possible to use Pg.s3_savage ( graphics-1.14 B -Patch ) with
Photon
1.13 ?
No its not.
Gerald
\
“Hardware Support Account” <hw@qnx.com> schrieb im Newsbeitrag
news:995g45$k1p$1@nntp.qnx.com…
Is this when the graphics seem to have locked up?
Yes. Lockup happens before login (phlogin-Screen).
I added a second sin-output ( lockup happened after login )
Erick.
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 987k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 10r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r RECV 0 32k 77k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 1454 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 58 //5//photon/bin/Photon 10r RECV 0 77k 28k
0 62 //5//bin/phfontpfr 10r RECV 0 106k 380k
0 67 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 69 //5/bin/ksh 10o WAIT -1 94k 45k
0 70 //5//drivers/Pg.flatdc 12r REPLY 58 110k 122k
1 71 //5/*/bin/phlogin 10r RECV 0 24k 61k
0 79 //5/bin/Input 12o RECV 0 30k 28k
0 83 //5/bin/Input 10o RECV 0 30k 28k
2 1455 //5/bin/sin 10o REPLY 1 45k 49k
Lockup happened after login:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 1703k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 22r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r READY — 32k 73k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 19363 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 57 //5//photon/bin/Photon 10r RECV 0 77k 49k
0 61 //5//bin/phfontpfr 12r RECV 0 106k 380k
0 65 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 67 //5/bin/login 10o REPLY 17 24k 20k
0 68 //5//drivers/Pg.flatdc 12r REPLY 57 110k 147k
0 76 //5/bin/Input 12o RECV 0 30k 28k
0 80 //5/bin/Input 10o RECV 0 30k 28k
3 115 //5//photon/bin/pwm 10o RECV 0 77k 69k
4 130 //5//photon/bin/pdm 10o RECV 0 135k 360k
4 143 //5/*/photon/bin/pterm 10o RECV 0 49k 364k
5 147 //5/bin/ksh 10o REPLY 17 94k 45k
Hi Gerald,
It looks like pwm and pdm have died, that is more than likly
why the screen isn’t updating. A Photon/apps guy would have
to comment on this.
Erick.
Gerald Aichwalder <gerald.aichwalder@lottery.co.at> wrote:
“Hardware Support Account” <> hw@qnx.com> > schrieb im Newsbeitrag
news:995g45$k1p$> 1@nntp.qnx.com> …
Is this when the graphics seem to have locked up?
Yes. Lockup happens before login (phlogin-Screen).
I added a second sin-output ( lockup happened after login )
Erick.
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 987k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 10r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r RECV 0 32k 77k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 1454 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 58 //5//photon/bin/Photon 10r RECV 0 77k 28k
0 62 //5//bin/phfontpfr 10r RECV 0 106k 380k
0 67 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 69 //5/bin/ksh 10o WAIT -1 94k 45k
0 70 //5//drivers/Pg.flatdc 12r REPLY 58 110k 122k
1 71 //5/*/bin/phlogin 10r RECV 0 24k 61k
0 79 //5/bin/Input 12o RECV 0 30k 28k
0 83 //5/bin/Input 10o RECV 0 30k 28k
2 1455 //5/bin/sin 10o REPLY 1 45k 49k
Lockup happened after login:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 1703k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 22r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r READY — 32k 73k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 19363 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 57 //5//photon/bin/Photon 10r RECV 0 77k 49k
0 61 //5//bin/phfontpfr 12r RECV 0 106k 380k
0 65 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 67 //5/bin/login 10o REPLY 17 24k 20k
0 68 //5//drivers/Pg.flatdc 12r REPLY 57 110k 147k
0 76 //5/bin/Input 12o RECV 0 30k 28k
0 80 //5/bin/Input 10o RECV 0 30k 28k
3 115 //5//photon/bin/pwm 10o RECV 0 77k 69k
4 130 //5//photon/bin/pdm 10o RECV 0 135k 360k
4 143 //5/*/photon/bin/pterm 10o RECV 0 49k 364k
5 147 //5/bin/ksh 10o REPLY 17 94k 45k
Hi Erick,
I believe, that doesn’t participate right.
The first sin, that I have sent, originated before the Login(Phlogin). At
this time, no PWM and PDM still runs, I believe.
The second sin originated after the Login. I can start a Pterm in this
condition over the Windows-Key (PWM Workspace Menu) without seeing
something. Then, I can do a shutdown.
Gerald
“Hardware Support Account” <hw@qnx.com> schrieb im Newsbeitrag
news:99oeai$p56$2@nntp.qnx.com…
Hi Gerald,
It looks like pwm and pdm have died, that is more than likly
why the screen isn’t updating. A Photon/apps guy would have
to comment on this.
Erick.
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
“Hardware Support Account” <> hw@qnx.com> > schrieb im Newsbeitrag
news:995g45$k1p$> 1@nntp.qnx.com> …
Is this when the graphics seem to have locked up?
Yes. Lockup happens before login (phlogin-Screen).
I added a second sin-output ( lockup happened after login )
Erick.
Gerald Aichwalder <> gerald.aichwalder@lottery.co.at> > wrote:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 987k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 10r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r RECV 0 32k 77k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 1454 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 58 //5//photon/bin/Photon 10r RECV 0 77k 28k
0 62 //5//bin/phfontpfr 10r RECV 0 106k 380k
0 67 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 69 //5/bin/ksh 10o WAIT -1 94k 45k
0 70 //5//drivers/Pg.flatdc 12r REPLY 58 110k 122k
1 71 //5/*/bin/phlogin 10r RECV 0 24k 61k
0 79 //5/bin/Input 12o RECV 0 30k 28k
0 83 //5/bin/Input 10o RECV 0 30k 28k
2 1455 //5/bin/sin 10o REPLY 1 45k 49k
Lockup happened after login:
SID PID PROGRAM PRI STATE BLK CODE DATA
– – Microkernel — ----- — 12976 0
0 1 sys/Proc32 30f READY — 122k 1703k
0 2 sys/Slib32 10r RECV 0 53k 4096
0 4 /bin/Fsys 22r RECV 0 77k 46354k
0 5 /bin/Fsys.eide 22r RECV 0 61k 188k
0 8 idle 0r READY — 0 40k
0 17 //5/bin/Dev32 24f RECV 0 32k 106k
0 20 //5/bin/Dev32.ansi 20r RECV 0 40k 110k
0 24 //5/bin/Pcmcia.generic 10f RECV 0 49k 65k
0 28 //5/bin/Dev32.ser 20r RECV 0 16k 40k
0 30 //5/bin/Dev32.par 9o RECV 0 8192 12k
0 31 //5/bin/Dev32.pty 20r RECV 0 12k 57k
0 32 //5/bin/Iso9660fsys 10o RECV 0 28k 61k
0 35 //5/bin/Fsys.floppy 10o RECV 0 20k 40k
0 36 //5/bin/Pipe 10r RECV 0 16k 32k
0 41 //5/bin/Net 23r READY — 32k 73k
0 44 //5/bin/Net.ether1000 20r RECV 0 28k 28k
0 46 //5/bin/nameloc 20o RECV 0 6144 20k
0 47 //5/bin/nameloc 20o REPLY 19363 6144 16k
0 49 //5/bin/tinit 10o WAIT -1 16k 28k
1 57 //5//photon/bin/Photon 10r RECV 0 77k 49k
0 61 //5//bin/phfontpfr 12r RECV 0 106k 380k
0 65 //5//drivers/Hydra.ms 10o RECV 0 53k 233k
2 67 //5/bin/login 10o REPLY 17 24k 20k
0 68 //5//drivers/Pg.flatdc 12r REPLY 57 110k 147k
0 76 //5/bin/Input 12o RECV 0 30k 28k
0 80 //5/bin/Input 10o RECV 0 30k 28k
3 115 //5//photon/bin/pwm 10o RECV 0 77k 69k
4 130 //5//photon/bin/pdm 10o RECV 0 135k 360k
4 143 //5/*/photon/bin/pterm 10o RECV 0 49k 364k
5 147 //5/bin/ksh 10o REPLY 17 94k 45k
\