Hi!
I had this problem too. Solution is simple:
Use devi-hirun driver for mouse device like that:
for PS2
/usr/photon/bin/devi-hirun -Pr ps2 mousedev
for serial mouse (I don’t remeber exactly, so best if you will look into
documentation)
/usr/photon/bin/devi-hirun -Pr msoft fd -d/dev/ser1
and setup mouse in XF86Config as
Section “InputDevice”
Identifier “Mouse0”
Driver “mouse”
Option “Device” “/dev/devi/mouse0”
EndSection
Note: there must be no “Protocol” option - it lead to incorrect mouse work.
And once more - after running Photon mouse will not work (if you know how to
fix this e-mail me please), so you will need to reboot after using Photon.
Regards,
Sergey Sobolev
-----Original Message-----
From: openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:openqnx-developer-admin=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org> ]On Behalf
Of Sergey Uvarov (by way of Jutta Steinhoff <jutta=> s4YScyvLPWwRLla1DLYS2Q@public.gmane.org> >)
Sent: Friday, March 01, 2002 16:48
To: openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [Openqnx-developer] list
\
- just redirected to the list. Frank, Armin had the same problem, too.
Jutta
Sergey Uvarov <colonel=> xtOKzeEkGihfOZc0+OmrVg@public.gmane.org> > wrote:Hi,
I try to start XFree86-4.1 but haven’t success.
X-server is started and is blocked. When I am moving mouse it is
working and when I am not moving mouse all X tasks are blocked.
if file xinitrc or $HOME/.xinitrc exist X starts and
exits. xinitrc and $HOME/.xinitrc I make empty.How can I solve this problem?Section “ServerLayout”
Identifier “XFree86 Configured”
Screen 0 “Screen0” 0 0
InputDevice “Mouse0” “CorePointer”
InputDevice “Keyboard0” “CoreKeyboard”
EndSectionSection “Files”
RgbPath “/opt/X11R6/lib/X11/rgb”
ModulePath “/opt/X11R6/lib/modules”
FontPath “/opt/X11R6/lib/X11/fonts/misc/”
FontPath “/opt/X11R6/lib/X11/fonts/Speedo/”
FontPath “/opt/X11R6/lib/X11/fonts/Type1/”
FontPath “/opt/X11R6/lib/X11/fonts/CID/”
FontPath “/opt/X11R6/lib/X11/fonts/75dpi/”
FontPath “/opt/X11R6/lib/X11/fonts/100dpi/”
EndSectionSection “Module”
Load “extmod”
Load “xie”
Load “pex5”
Load “glx”
Load “dbe”
Load “record”
EndSectionSection “InputDevice”
Identifier “Keyboard0”
Driver “keyboard”
Option “XkbRules” “xfree86”
Option “XkbModel” “pc101”
EndSectionSection “InputDevice”
Identifier “Mouse0”
Driver “mouse”
Option “Protocol” “Microsoft”
Option “Device” “/dev/ser1”
EndSectionSection “Monitor”
Identifier “Monitor0”
VendorName “Monitor Vendor”
ModelName “Monitor Model”
HorizSync 30-64
VertRefresh 44-100
EndSectionSection “Device”
Identifier “Card0”
Driver “ati”
VendorName “ATI”
BoardName “Mach64 GB”
ChipSet “ati”
ChipId 0x4742
ChipRev 0x5c
BusID “PCI:1:0:0”
EndSectionSection “Screen”
Identifier “Screen0”
Device “Card0”
Monitor “Monitor0”
DefaultDepth 24SubSection “Display”
Depth 1
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 4
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 15
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 16
Modes “1024x768” “800x600” “640x480”
EndSubSection
SubSection “Display”
Depth 24
Modes “1024x768” “800x600” “640x480”
EndSubSection
EndSection
\
openqnx-developer mailing list
openqnx-developer=> 5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/openqnx-developer