For those of you who are lucky/unlucky to use qnx 6.2.1,
the following info will be helpful.
Frank
– forwarded message –
From: Garry Turcotte <garry=mMf908IxFcw@public.gmane.org>
Newsgroups: qdn.public.qnxrtp.installation
Subject: Re: XFree86 on my QNX 6.2.1
Date: Thu, 13 Mar 2003 11:40:40 -0500
Replied by email, but others may be interested…
This is a known problem PR14832
You can fix it yourself by changing the
open(/dev/mem); mmap() -to- mmap_device_memory()
and
munmap() -to- munmap_device_memory()
in
xc/programs/Xserver/hw/xfree86/os-support/nto/nto_video.c
hmetal wrote:
Dear;
I met some troubles to set up XFree86 on my QNX 6.2.1 box.
I have run redhat KDE on the same hardware, but I met troubles at the QNX
box.I run XFree86 with non photon like as;
setconf CS_LIBPATH /opt/X11R6/lib:
getconf CS_LIBPATH/usr/photon/bin/devi-hirun -Pr ps2 mousedev
/opt/X11R6/bin/X -configure
XFree86 -xf86config /root/XF86Config.new
and, the more information files are attached.XF86Config-4 : redhat linux’s XF86 configuration file : act good at the
linux box
XF86Config.new : the result file of “X -configure”
XFree86.0.log : the error log of “XFree86 -xf86config /root/XF86Config.new”
XF86Config.new.1 : the my modification of XF86Config.new compared with
XF86Config-4 file
XFree86.0.log.1 : the error log of “XFree86 -xf86config
/root/XF86Config.new.1”Best Regards;
Gi-hyun
Gi Hyun Lim System Team / Senior Engineer
RT Solutions Inc.
2F, Baekseok Bldg., 432-3, Sindang2, Chung-Gu, Seoul,
100-835, Korea
Tel : +82-2-2237-4885 Fax : +82-2-2237-6885
hmetal=> JH13nPCt1RbCpPFWADiLC1AUjnlXr6A1@public.gmane.org
http://www.qnx.co.kr > > http://www.rtsolutions.co.kr
Make a more Funny World\
– end of forwarded message –
\
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and register here for some mind boggling fun and
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en