I was recently given the following software:
qnx operating system 2.21 2/28/95 1 disk
qnx windows runtime 2.2.8 3/9/95 5 disks
realflex windows 1.3.0 3/9/95 7 disks
qnx windows update 2.3.4 3/9/95 2 disks
realflex windows revision 1.3.1 3/9/95 1 disk
modbus windows 1.3.0 3/9/95 1 disk
control sequence language 1.3.0 3/9/95 1 disk
abhs scan windows 1.3.0 3/9/95 1 disk
If any of this makes any sense please let me know!! I have all
documentation and everything was sealed until I opened the disk packages.
Feel free to contact me at bbaker@freeway.net
you will want to contact the Realflex people … they can guide you
through any realflex/qnx setup stuff.
i believe that datac-technologies now has the rights to the realflex software.
i would recommend checking them out on the web…
Brad Baker <bbaker@freeway.net> wrote:
I was recently given the following software:
qnx operating system 2.21 2/28/95 1 disk
qnx windows runtime 2.2.8 3/9/95 5 disks
realflex windows 1.3.0 3/9/95 7 disks
qnx windows update 2.3.4 3/9/95 2 disks
realflex windows revision 1.3.1 3/9/95 1 disk
modbus windows 1.3.0 3/9/95 1 disk
control sequence language 1.3.0 3/9/95 1 disk
abhs scan windows 1.3.0 3/9/95 1 disk
If any of this makes any sense please let me know!! I have all
documentation and everything was sealed until I opened the disk packages.
Feel free to contact me at > bbaker@freeway.net
–
Randy Martin randy@qnx.com
Manager of FAE Group, North America
QNX Software Systems www.qnx.com
175 Terence Matthews Crescent, Kanata, Ontario, Canada K2M 1W8
Tel: 613-591-0931 Fax: 613-591-3579
Brad Baker <bbaker@freeway.net> wrote:
I was recently given the following software:
qnx operating system 2.21 2/28/95 1 disk
qnx windows runtime 2.2.8 3/9/95 5 disks
realflex windows 1.3.0 3/9/95 7 disks
qnx windows update 2.3.4 3/9/95 2 disks
realflex windows revision 1.3.1 3/9/95 1 disk
modbus windows 1.3.0 3/9/95 1 disk
control sequence language 1.3.0 3/9/95 1 disk
abhs scan windows 1.3.0 3/9/95 1 disk
If any of this makes any sense please let me know!! I have all
documentation and everything was sealed until I opened the disk packages.
Feel free to contact me at > bbaker@freeway.net
Sounds like process control software. Were you expected to install
all of it? Or was it just given to you?
-David
QNX Training Services
dagibbs@qnx.com
“Brad Baker” <bbaker@freeway.net> wrote in message
news:93sbeu$d19$1@inn.qnx.com…
I was recently given the following software:
qnx operating system 2.21 2/28/95 1 disk
qnx windows runtime 2.2.8 3/9/95 5 disks
realflex windows 1.3.0 3/9/95 7 disks
qnx windows update 2.3.4 3/9/95 2 disks
realflex windows revision 1.3.1 3/9/95 1 disk
modbus windows 1.3.0 3/9/95 1 disk
control sequence language 1.3.0 3/9/95 1 disk
abhs scan windows 1.3.0 3/9/95 1 disk
If any of this makes any sense please let me know!! I have all
documentation and everything was sealed until I opened the disk packages.
Feel free to contact me at > bbaker@freeway.net
\
Hi there.
I am not sure if you are interest in this software, but I am, please let
me know if you are planning to trade this.
Thanks,
Marcos Galvani
“Brad Baker” <bbaker@freeway.net> wrote in message
news:93sbeu$d19$1@inn.qnx.com…
I was recently given the following software:
qnx operating system 2.21 2/28/95 1 disk
qnx windows runtime 2.2.8 3/9/95 5 disks
realflex windows 1.3.0 3/9/95 7 disks
qnx windows update 2.3.4 3/9/95 2 disks
realflex windows revision 1.3.1 3/9/95 1 disk
modbus windows 1.3.0 3/9/95 1 disk
control sequence language 1.3.0 3/9/95 1 disk
abhs scan windows 1.3.0 3/9/95 1 disk
If any of this makes any sense please let me know!! I have all
documentation and everything was sealed until I opened the disk packages.
Feel free to contact me at > bbaker@freeway.net
The above software is for the Realflex SCADA system developed by BJSoftware.
It is a qnx2 based system that uses Qnx windows as the GUI
Padraig Furlong