Does QNX 6 support utility same cfont in QNX 4.*
Nick.
Does QNX 6 support utility same cfont in QNX 4.*
Nick.
with qnx6 we use photon for graphical text. my understanding is that a
lot of the text mode ‘vga-like’ capabilities of the graphics parts being
made now are being phased out due to cost.
blame the onslaught of Windows…
Nick <nikolai_r@yahoo.com> wrote:
Does QNX 6 support utility same cfont in QNX 4.*
Nick.
–
Randy Martin randy@qnx.com
Manager of FAE Group, North America
QNX Software Systems www.qnx.com
175 Terence Matthews Crescent, Kanata, Ontario, Canada K2M 1W8
Tel: 613-591-0931 Fax: 613-591-3579
Does that include the ability, in text mode, to toggle between 25 & 50 line
mode?
BTW, whose/what cost? Hardware? I don’t think so. Software? Whimps!
Port it from QNX 4. ;~}
–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
“Randy Martin” <randy@qnx.com> wrote in message
news:99g3uo$ie$2@nntp.qnx.com…
with qnx6 we use photon for graphical text. my understanding is that a
lot of the text mode ‘vga-like’ capabilities of the graphics parts being
made now are being phased out due to cost.
blame the onslaught of Windows…
Nick <> nikolai_r@yahoo.com> > wrote:
Does QNX 6 support utility same cfont in QNX 4.*Nick.
\Randy Martin > randy@qnx.com
Manager of FAE Group, North America
QNX Software Systems > www.qnx.com
175 Terence Matthews Crescent, Kanata, Ontario, Canada K2M 1W8
Tel: 613-591-0931 Fax: 613-591-3579
“Bill Caroselli” <Bill@Sattel.com> wrote in message
news:99g6sb$dj6$1@inn.qnx.com…
Does that include the ability, in text mode, to toggle between 25 & 50
line
mode?BTW, whose/what cost? Hardware? I don’t think so. Software? Whimps!
Port it from QNX 4. ;~}–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
“Randy Martin” <> randy@qnx.com> > wrote in message
news:99g3uo$ie$> 2@nntp.qnx.com> …
with qnx6 we use photon for graphical text. my understanding is that a
lot of the text mode ‘vga-like’ capabilities of the graphics parts being
made now are being phased out due to cost.
blame the onslaught of Windows…
Nick <> nikolai_r@yahoo.com> > wrote:
Does QNX 6 support utility same cfont in QNX 4.*Nick.
\Randy Martin > randy@qnx.com
Manager of FAE Group, North America
QNX Software Systems > www.qnx.com
175 Terence Matthews Crescent, Kanata, Ontario, Canada K2M 1W8
Tel: 613-591-0931 Fax: 613-591-3579I need to load international screen fonts in text mode of console.
What posibilities are ?
Nick
Bill Caroselli <Bill@sattel.com> wrote:
Does that include the ability, in text mode, to toggle between 25 & 50 line
mode?BTW, whose/what cost? Hardware? I don’t think so. Software? Whimps!
Port it from QNX 4. ;~}
A lot of non-x86 hardware has never had the vga' capabilities that support
text mode’.
OK. Got it.
So the issue is one driver process to work across CPU platforms.
–
Bill Caroselli - Sattel Global Networks
1-818-709-6201 ext 122
<pete@qnx.com> wrote in message news:99nqgc$e0t$3@nntp.qnx.com…
Bill Caroselli <> Bill@sattel.com> > wrote:
Does that include the ability, in text mode, to toggle between 25 & 50
line
mode?BTW, whose/what cost? Hardware? I don’t think so. Software? Whimps!
Port it from QNX 4. ;~}A lot of non-x86 hardware has never had the
vga' capabilities that support
text mode’.
Bill Caroselli <Bill@sattel.com> wrote:
OK. Got it.
So the issue is one driver process to work across CPU platforms.
Not neccessarily one driver process, but one code base at least.
Many of the non-x86 processor families do have ways to simulate' x86 I/O, so VGA
stuff’ can be done on those platforms, but it
doesn’t `just work’.
As Armin could probably tell you… you might have to sing
`Old MacDonald had a farm… eieio()’