QNX4 --> QNX6 : sys/qnxterm.h exist ?????

QNX Newsgroups (Archives) qdn.public.porting
1

Hello,

I’m trying to port a QNX4 programme to QNX6,
and i use ‘header file’ : sys/qnxterm.sys.

But this ‘headrer file’ doesn’t exist on QNX6 version ;-(

Does somebody have met this probleme ???

What are my possibilities ???

think by advance

Antoine

2

Antoine <antoine.gidrol@free.fr> wrote:
: Hello,

: I’m trying to port a QNX4 programme to QNX6,
: and i use ‘header file’ : sys/qnxterm.sys.

: But this ‘headrer file’ doesn’t exist on QNX6 version ;-(

: Does somebody have met this probleme ???

: What are my possibilities ???

Have you looked at the QNX 4 to QNX 6 Migration Guide? If you don’t have
it on your machine, take a look at our website:

http://www.qnx.com/developer/docs/momentics_nc_docs/mig4nto/guide/index.html

Steve Reid stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

3

HI,

thinks for this address,
i hope find my solution.

antoine

“Steve Reid” <stever@qnx.com> a écrit dans le message news:
b2tv7m$hi3$1@nntp.qnx.com…

Antoine <> antoine.gidrol@free.fr> > wrote:
: Hello,

: I’m trying to port a QNX4 programme to QNX6,
: and i use ‘header file’ : sys/qnxterm.sys.

: But this ‘headrer file’ doesn’t exist on QNX6 version ;-(

: Does somebody have met this probleme ???

: What are my possibilities ???

Have you looked at the QNX 4 to QNX 6 Migration Guide? If you don’t have
it on your machine, take a look at our website:


http://www.qnx.com/developer/docs/momentics_nc_docs/mig4nto/guide/index.html

Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

4

I find it ;-(((((((((((((((((

http://www.qnx.com/developer/docs/momentics_nc_docs/mig4nto/guide/libtable.h
tml#t

look the answer ;-((((((
term_* functions
The following functions have no QNX Neutrino equivalent, and aren’t in the
migration library;

use ncurses instead.


term_attr_type()
term_axis()
term_bar()
term_box()
term_box_fill()
term_box_off()
term_box_on()
…



i try to see the “ncurses”

see you later

Antoine



“Steve Reid” <stever@qnx.com> a écrit dans le message news:
b2tv7m$hi3$1@nntp.qnx.com…

Antoine <> antoine.gidrol@free.fr> > wrote:
: Hello,

: I’m trying to port a QNX4 programme to QNX6,
: and i use ‘header file’ : sys/qnxterm.sys.

: But this ‘headrer file’ doesn’t exist on QNX6 version ;-(

: Does somebody have met this probleme ???

: What are my possibilities ???

Have you looked at the QNX 4 to QNX 6 Migration Guide? If you don’t have
it on your machine, take a look at our website:


http://www.qnx.com/developer/docs/momentics_nc_docs/mig4nto/guide/index.html

Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems