3com 3csoho-100 nic in qnx 6.2 rtp?

QNX Newsgroups (Archives) qdn.public.ddk.network
1

How can I configure the 3csoho100 nic in QNX 6.2 ?
QNX didn’t detect the nic.
Thanks in advance.

2

Please post the output from ‘pci -v’. I’m not sure whether this chipset
is 905 compatible.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:

How can I configure the 3csoho100 nic in QNX 6.2 ?
QNX didn’t detect the nic.
Thanks in advance.

3

Here is my result of “PCI-v”
I hope this nic is supported in QNX.

\

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1130h, 82815/82815EM/EP Host-Hub Interface Bridge / DRAM
Ctrlr
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 88h
Capability ID = 9h
Capabilities = f104h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1131h, 82815/82815EM/EP AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 20h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = dc00h
Memory Limit = ddf0h
Prefetchable Memory Base = d000h
Prefetchable Memory Limit= d7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = c0h
I/O Limit = c0h
Secondary Status = 2280h
Memory Base = de00h
Memory Limit = dff0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2442h, 82801BA/BAM USB Controller, USB-A
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d000h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 5000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2444h, 82801BA/BAM USB Controller, USB-B
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 4
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d400h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc00h length 64 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 5

Class = Display (VGA)
Vendor ID = 5333h, S3 Incorporated
Device ID = 8a22h, 86C394-397 Savage 4
PCI index = 0h
Class Codes = 030000h
Revision ID = 4h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 230h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = f8h
Cache Line Size= 8h un-cacheable
PCI Mem Address = dd000000h 32bit length 524288 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
Subsystem Vendor ID = 5333h
Subsystem ID = 8a22h
Max Lat = 255ns
Min Gnt = 4ns
PCI Int Pin = INT A
Interrupt line = 12
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 621h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000007h

Class = Network (Ethernet)
Vendor ID = 10b7h, 3Com Corporation
Device ID = 7646h, 3CSOHO100-TX Hurricane
PCI index = 0h
Class Codes = 020000h
Revision ID = 30h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI IO Address = c000h length 128 enabled
PCI Mem Address = df000000h 32bit length 128 enabled
Subsystem Vendor ID = 10b7h
Subsystem ID = 7646h
Max Lat = 10ns
Min Gnt = 10ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7601h - 0h



“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.020830083237.5826G@node90.ott.qnx.com…

Please post the output from ‘pci -v’. I’m not sure whether this chipset
is 905 compatible.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:
How can I configure the 3csoho100 nic in QNX 6.2 ?
QNX didn’t detect the nic.
Thanks in advance.
\

4

You can try starting io-net as follows:

io-net -del900 vid=0x10b7,did=0x7646 -ptcpip

If this doesn’t work, then I’m afraid that you are out of luck.
Please let me know if this doesn’t work, as I will have to see if I
can get the docs. from 3Com.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:

Here is my result of “PCI-v”
I hope this nic is supported in QNX.

\

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1130h, 82815/82815EM/EP Host-Hub Interface Bridge / DRAM
Ctrlr
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 88h
Capability ID = 9h
Capabilities = f104h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1131h, 82815/82815EM/EP AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 20h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = dc00h
Memory Limit = ddf0h
Prefetchable Memory Base = d000h
Prefetchable Memory Limit= d7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = c0h
I/O Limit = c0h
Secondary Status = 2280h
Memory Base = de00h
Memory Limit = dff0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2442h, 82801BA/BAM USB Controller, USB-A
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d000h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 5000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2444h, 82801BA/BAM USB Controller, USB-B
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 4
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d400h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc00h length 64 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 5

Class = Display (VGA)
Vendor ID = 5333h, S3 Incorporated
Device ID = 8a22h, 86C394-397 Savage 4
PCI index = 0h
Class Codes = 030000h
Revision ID = 4h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 230h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = f8h
Cache Line Size= 8h un-cacheable
PCI Mem Address = dd000000h 32bit length 524288 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
Subsystem Vendor ID = 5333h
Subsystem ID = 8a22h
Max Lat = 255ns
Min Gnt = 4ns
PCI Int Pin = INT A
Interrupt line = 12
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 621h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000007h

Class = Network (Ethernet)
Vendor ID = 10b7h, 3Com Corporation
Device ID = 7646h, 3CSOHO100-TX Hurricane
PCI index = 0h
Class Codes = 020000h
Revision ID = 30h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI IO Address = c000h length 128 enabled
PCI Mem Address = df000000h 32bit length 128 enabled
Subsystem Vendor ID = 10b7h
Subsystem ID = 7646h
Max Lat = 10ns
Min Gnt = 10ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7601h - 0h



“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.020830083237.5826G@node90.ott.qnx.com> …
Please post the output from ‘pci -v’. I’m not sure whether this chipset
is 905 compatible.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:
How can I configure the 3csoho100 nic in QNX 6.2 ?
QNX didn’t detect the nic.
Thanks in advance.



\

5

It doesn’t work.
But anyway, thank you for your concern.

“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:Voyager.020903081752.6278A@node90.ott.qnx.com…

You can try starting io-net as follows:

io-net -del900 vid=0x10b7,did=0x7646 -ptcpip

If this doesn’t work, then I’m afraid that you are out of luck.
Please let me know if this doesn’t work, as I will have to see if I
can get the docs. from 3Com.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:
Here is my result of “PCI-v”
I hope this nic is supported in QNX.

\

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1130h, 82815/82815EM/EP Host-Hub Interface Bridge /
DRAM
Ctrlr
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 88h
Capability ID = 9h
Capabilities = f104h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 1131h, 82815/82815EM/EP AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 20h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 20h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = dc00h
Memory Limit = ddf0h
Prefetchable Memory Base = d000h
Prefetchable Memory Limit= d7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 12ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 20h
I/O Base = c0h
I/O Limit = c0h
Secondary Status = 2280h
Memory Base = de00h
Memory Limit = dff0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2442h, 82801BA/BAM USB Controller, USB-A
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d000h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = 5000h length 16 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2444h, 82801BA/BAM USB Controller, USB-B
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 4
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d400h length 32 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc00h length 64 enabled
Subsystem Vendor ID = 1019h
Subsystem ID = a04h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 5

Class = Display (VGA)
Vendor ID = 5333h, S3 Incorporated
Device ID = 8a22h, 86C394-397 Savage 4
PCI index = 0h
Class Codes = 030000h
Revision ID = 4h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 230h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = f8h
Cache Line Size= 8h un-cacheable
PCI Mem Address = dd000000h 32bit length 524288 enabled
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
Subsystem Vendor ID = 5333h
Subsystem ID = 8a22h
Max Lat = 255ns
Min Gnt = 4ns
PCI Int Pin = INT A
Interrupt line = 12
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 621h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000007h

Class = Network (Ethernet)
Vendor ID = 10b7h, 3Com Corporation
Device ID = 7646h, 3CSOHO100-TX Hurricane
PCI index = 0h
Class Codes = 020000h
Revision ID = 30h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
PCI IO Address = c000h length 128 enabled
PCI Mem Address = df000000h 32bit length 128 enabled
Subsystem Vendor ID = 10b7h
Subsystem ID = 7646h
Max Lat = 10ns
Min Gnt = 10ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7601h - 0h



“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:> Voyager.020830083237.5826G@node90.ott.qnx.com> …
Please post the output from ‘pci -v’. I’m not sure whether this
chipset
is 905 compatible.

Previously, Jeong Min Kim wrote in qdn.public.ddk.network:
How can I configure the 3csoho100 nic in QNX 6.2 ?
QNX didn’t detect the nic.
Thanks in advance.




\