Hi!
when io-net filer starting then
in qnx6.1 _IO_NET_MSG_ADDR_ADD is always received after
_IO_NET_MSG_DL_ADVERT
but in qnx6.2 io-net filter does not receive _IO_NET_MSG_ADDR_ADD message !?
:-/
Q1: may be i mistaken?
Q2: if no: then how i can know ip-addresses which were assigned to
interface(s)?
Thanks
vasa
Please see the thread called “Msg Packets…” in this
newsgroup.
-seanb
qnx <vasilii@nemail.ru> wrote:
Hi!
when io-net filer starting then
in qnx6.1 _IO_NET_MSG_ADDR_ADD is always received after
_IO_NET_MSG_DL_ADVERT
but in qnx6.2 io-net filter does not receive _IO_NET_MSG_ADDR_ADD message !?
:-/Q1: may be i mistaken?
Q2: if no: then how i can know ip-addresses which were assigned to
interface(s)?Thanks
vasa
Thanks,
Please see the thread called “Msg Packets…” in this
newsgroup.
so, i have read it. very nice. why so big changes?
but my general question is the same:
Q1: how i can know in ip-filter ip-addresses which were assigned to
interface(s) w/o manipulations with interfaces after ip-filter was
loaded?
Thanks
vasa
It’s fixed in the next release.
-seanb
Sreekanth <nospam@nospam.com> wrote:
I guess the only plausible solution right now is to Configure the IP
addresses after your module is loaded.
Sean,
Any Idea if this bug is going to be fixed in near future?Sreekanth
Sreekanth
“vasa” <> vasilii@nemail.ru> > wrote in message news:anhqem$djn$> 1@inn.qnx.com> …
Thanks,Please see the thread called “Msg Packets…” in this
newsgroup.
so, i have read it. very nice. why so big changes?but my general question is the same:
Q1: how i can know in ip-filter ip-addresses which were assigned to
interface(s) w/o manipulations with interfaces after ip-filter was
loaded?Thanks
vasa
\
I guess the only plausible solution right now is to Configure the IP
addresses after your module is loaded.
Sean,
Any Idea if this bug is going to be fixed in near future?
Sreekanth
Sreekanth
“vasa” <vasilii@nemail.ru> wrote in message news:anhqem$djn$1@inn.qnx.com…
Thanks,
Please see the thread called “Msg Packets…” in this
newsgroup.
so, i have read it. very nice. why so big changes?but my general question is the same:
Q1: how i can know in ip-filter ip-addresses which were assigned to
interface(s) w/o manipulations with interfaces after ip-filter was
loaded?Thanks
vasa
\
I have an idea, but you should ask your sales rep.
-seanb
Sreekanth <nospam@nospam.com> wrote:
Meaning 6.2.1 ? When is that , any tentative date?
Sreekanth
“Sean Boudreau” <> seanb@node25.ott.qnx.com> > wrote in message
news:anhue9$4j0$> 1@nntp.qnx.com> …It’s fixed in the next release.
-seanb
Sreekanth <> nospam@nospam.com> > wrote:
I guess the only plausible solution right now is to Configure the IP
addresses after your module is loaded.
Sean,
Any Idea if this bug is going to be fixed in near future?Sreekanth
Sreekanth
“vasa” <> vasilii@nemail.ru> > wrote in message
news:anhqem$djn$> 1@inn.qnx.com> …
Thanks,Please see the thread called “Msg Packets…” in this
newsgroup.
so, i have read it. very nice. why so big changes?but my general question is the same:
Q1: how i can know in ip-filter ip-addresses which were assigned to
interface(s) w/o manipulations with interfaces after ip-filter was
loaded?Thanks
vasa
\
Meaning 6.2.1 ? When is that , any tentative date?
Sreekanth
“Sean Boudreau” <seanb@node25.ott.qnx.com> wrote in message
news:anhue9$4j0$1@nntp.qnx.com…
It’s fixed in the next release.
-seanb
Sreekanth <> nospam@nospam.com> > wrote:
I guess the only plausible solution right now is to Configure the IP
addresses after your module is loaded.
Sean,
Any Idea if this bug is going to be fixed in near future?Sreekanth
Sreekanth
“vasa” <> vasilii@nemail.ru> > wrote in message
news:anhqem$djn$> 1@inn.qnx.com> …
Thanks,Please see the thread called “Msg Packets…” in this
newsgroup.
so, i have read it. very nice. why so big changes?but my general question is the same:
Q1: how i can know in ip-filter ip-addresses which were assigned to
interface(s) w/o manipulations with interfaces after ip-filter was
loaded?Thanks
vasa
\