Hi
I have written an app which attempts to open a socket and send data
I get the following when running
Could not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
Hi Bob,
Did you link against the socket library when you built it,
(-lsocket option to qcc)?
Regards,
Barry F.
Bob miles <rmiles@radamec.co.uk> wrote in message
news:b3d7dd$5vt$1@inn.qnx.com…
Hi
I have written an app which attempts to open a socket and send data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
Barry
I tried the compiler option but still have the same end result .
Is it looking for some DLLs or something that cause the unresolves - do I
have
to tell compiler/linker where these are ?
BOB
“OS Support” <os@qnx.com> wrote in message news:b3deaf$mm3$1@nntp.qnx.com…
Hi Bob,
Did you link against the socket library when you built it,
(-lsocket option to qcc)?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3d7dd$5vt$> 1@inn.qnx.com> …
HiI have written an app which attempts to open a socket and send data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
\
Can you please post your makefile and the errors that are generated?
Regards,
Barry F.
Bob miles <rmiles@radamec.co.uk> wrote in message
news:b3f9hm$g15$1@inn.qnx.com…
Barry
I tried the compiler option but still have the same end result .
Is it looking for some DLLs or something that cause the unresolves - do I
have
to tell compiler/linker where these are ?
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3deaf$mm3$> 1@nntp.qnx.com> …
Hi Bob,Did you link against the socket library when you built it,
(-lsocket option to qcc)?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3d7dd$5vt$> 1@inn.qnx.com> …
HiI have written an app which attempts to open a socket and send data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
\
Hi
There are no errors when compiling and linking, the only errors I get are
when trying to
execute the program on the target which are stated below, which seem to be
some setup/configuration
problem when trying to run this application on the target.
What make file do you want me to post ? I have attached that which built my
executable -
This was compiled and linked on a Windows 2000 platform .
I am using the “INSTRUMENTATION,None” option. This was built through
Rhapsody
(a software CAD package).
The operating system was built straight from QNX 6.2 CD with no tayloring -
all I put in was the
Host IP address.
Cheers
BOB
“OS Support” <os@qnx.com> wrote in message news:b3gmpg$si$1@nntp.qnx.com…
Can you please post your makefile and the errors that are generated?
Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3f9hm$g15$> 1@inn.qnx.com> …
BarryI tried the compiler option but still have the same end result .
Is it looking for some DLLs or something that cause the unresolves - do
I
have
to tell compiler/linker where these are ?
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3deaf$mm3$> 1@nntp.qnx.com> …
Hi Bob,Did you link against the socket library when you built it,
(-lsocket option to qcc)?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3d7dd$5vt$> 1@inn.qnx.com> …
HiI have written an app which attempts to open a socket and send data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
\
begin 666 Copy of PCC_ITERATION1.mak
M#0H-“B,C(R,C(R,C(R,C(R,@5&%R9V5T(‘1Y<&4@$1E8G5G+U)E;&5A<V4I
M(",C(R,C(R,C(R,C(R,C(R,C(PT(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C#0I#4%!#;VUP
M:6QE1&5B=6<]+6<-"D-04$-O;7!I;&5296QE87-E/2U/#0I,:6YK1&5B=6<]
M+6<-“DQI;FM296QE87-E/2U/#0HC(%%.6%]405)‘150]8SHO=&]O;’,O<6YX
M<V1K+W1A<F=E=”]Q;G@V#0I#;VYF:6=U<F%T:6]N0U!00V]M<&EL95-W:71C
M:&5S/2 @+4DN("U))"A/35)/3U0I("U))"A/35)/3U0I+TQA;F=#<’ @+4DD
M*$]-4D]/5"DO3&%N9T-P<”]O>&8@)“A)3E-47T9,04=32 D$E.0TQ51$5?
M4$%42"D@)“A)3E-47TE.0TQ51$532U$55-%7TE/4U1214%-("0H0U!00V]M
M<&EL95)E;&5A<V4I("UC( T#0HC(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M(R,C(R,C(R,C(R,C(R,C(PT*(R,C(R,C(%!R961E9FEN960@;6%C<F]S(”,C
M(R,C(R,C(R,C(R,C(R,-“E)-/7)M(“UR9@T340];6MD:7(@+7 -"DE.0TQ5
M1$5?455!3$E&2452/2U)#0I#0SUQ8V,@+59G8V-?;G1O>#@V("U))"A13EA?
M5$%21T542]U<W(O:6YC;‘5D92 M1%5315])3U-44D5!30T3$E"7T–1#UA
M<@T3$E.2U]#340])"A#0RD-"DQ)0E]&3$%‘4SUR=G5S#0HC(R,C3$E.2U]&
M3$%‘4ST@+6QM("UL8W!P("UL<W1D8RLK(“0H3&EN:U)E;&5A<V4I(” -"B,C
M(R-,24Y+7T9,04=3/2 O>#@V+VQI8B]L:6)M+G-O("UL8W!P(“0H3&EN:U)E
M;&5A<V4I(” -"DQ)3DM?1DQ!1U,](“UL;2 M;&-P<” D*$QI;FM296QE87-E
M2 @#0H-“B,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M(R,C#0HC(R,C(R,C($-O;G1E>'0@;6%C<F]S(”,C(R,C(R,C(R,C(R,C(R,C
M(PT#0I&3$%‘4T9)3$4]#0I254Q%4T9)3$4]#0I/35)/3U0](D,Z+U)H87!S
M;V1Y+U-H87)E(@T*#0I#4%!?15A4/2YC<’ -“DA?15A4/2YH#0I/0DI?15A4
M/2YO#0I%6$5?15A4/0T3$E"7T585#TN80T#0I)3E-44E5-14Y4051)3TX]
M3F]N90T*#0I424U%7TU/1$5,/5)E86Q4:6UE#0H-“E1!4D=%5%]465!%/45X
M96-U=&%B;&4-”@T5$%21T547TY!344]4$-#7TE415)!5$E/3C$-"@T86QL
M(#H@)“A405)'151?3D%-12DD*$5815]%6%0I(%!#0U])5$52051)3TXQ+FUA
M:PT*#0I405)'151?34%)3CU-86EN4$-#7TE415)!5$E/3C$-”@T3$E"4ST@
M7 T(”!C.B]R:&%P<V]D>2]S:&%R92]L86YG8W!P+VQI8B]L:6)Q;GAO>&8N
M82!<#0H@(&,Z+W)H87!S;V1Y+W-H87)E+VQA;F=C<’ O;&EB+VQI8G%N>’=E
M8F-O;7!O;F5N=’,N82!<#0H@(&,Z+W%N>’-D:R]T87)G970O<6YX-B]X.#8O
M;&EB+VQI8G-O8VME=“YA#0H-“DE.0TQ51$5?4$%42#T-”@T041$251)3TY!
M3%]/0DI3/0T#0I/0DI3/2!<#0H@($5T:&5R;F5T26YT97)F86-E+F@(%P-
M"B @1W5N3F5T26YT97)F86-E+F@(%P-“B @54104V]C:V5T+F@#0H-”@T*
M#0H-“B,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M#0HC(R,C(R,C(%!R961E9FEN960@;6%C<F]S(”,C(R,C(R,C(R,C(R,C(PT*
M)“A/0DI32 Z(" D$E.4U1?3$E"4RD@)“A/6$9?3$E"4RD-”@T3T)7T1)
M4CT-"@T:69E<2 H)"A/0DI?1$E22PI#0H)0U)%051%7T]“2E]$25(]#0H)
M0TQ%04Y?3T)7T1)4CT-“F5L<V4-”@E#4D5!5$5?3T)7T1)4CT@)"A-1"D@
M)"A/0DI?1$E20T"4-,14%.7T]“2E]$25(](” D*%)-2 D$]“2E]$25(I
M#0IE;F1I9@T*#0H-“FEF97$@"0H24Y35%)5345.5$%424].2Q!;FEM871I
M;VXI#0H)24Y35%]&3$%'4STM1$]-04Y)34%43U(-"@E)3E-47TQ)0E,]("(D
M$]-4D]/5"DB+TQA;F=#<’ O;&EB+U%.6&%O;6%N:6TD$Q)0E]%6%0I#0H)
M3UA&7TQ)0E,](B0H3TU23T]42(O3&%N9T-P<"]L:6(O44Y8;WAF:6YS="0H
M3$E"7T585"D@(B0H3TU23T]42(O3&%N9T-P<”]L:6(O44Y8;VUC;VUA<’!L
M)“A,24)?15A40T"5-/0TM?3$E”/2UL<V]C:V5T#0H-“F5L<V4-”@EI9F5Q
M(”@D*$E.4U1254U%3E1!5$E/3BDL5’)A8VEN9RD-”@D)24Y35%]&3$%'4STM
M1$]-5%)!0T52#0H)“4E.4U1?24Y#3%5$15,]+4DD*$]-4D]/5"DO3&%N9T-P
M<”]A;VT@+4DD*$]-4D]/5"DO3&%N9T-P<”]T;VT-”@D)24Y35%],24)3/2(D
M*$]-4D]/5"DB+TQA;F=#<’ O;&EB+U%.6’1O;71R86-E)“A,24)?15A42 B
M)“A/35)/3U0I(B],86YG0W!P+VQI8B]13EAA;VUT<F%C920H3$E"7T585"D-
M”@D)3UA&7TQ)0E,]("(D$]-4D]/5"DB+TQA;F=#<’ O;&EB+U%.6&]X9FEN
M<W0D*$Q)0E]%6%0I(”(D*$]-4D]/5"DB+TQA;F=#<’ O;&EB+U%.6&]M8V]M
M87!P;“0H3$E"7T585"D-”@D)4T]#2U],24(]+6QS;V-K970-”@T*“65L<V4-
M”@EI9F5Q(”@D*$E.4U1254U%3E1!5$E/3BDL3F]N92D-”@T*"0E)3E-47T9,
M04=3/0T*"0E)3E-47TE.0TQ51$53/0T*“0E)3E-47TQ)0E,]#0H)“4]81E],
M24)3/2(D*$]-4D]/5"DB+TQA;F=#<’ O;&EB+U%.6&]X9B0H3$E"7T585"D-
M”@D)4T]#2U],24(]#0H-”@D)96QS90T*"0E 96-H;R!!;B!I;G9A;&ED($EN
M<W1R=6UE;G1A=&EO;B D*$E.4U1254U%3E1!5$E/3BD@:7,@<W!E8VEF:65D
M+@T*"0EE>&ET#0H)“65N9&EF#0H)96YD:68-“F5N9&EF#0H-“BY3549&25A%
M4SH@)“A#4%!?15A40T#0HC(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,-“B,C
M(R,C(R,C(R,C(R,C(R,C(R,C(R!#;VYT97AT(&1E<&5N961E8VEE<R!A;F0@
M8V]M;6%N9’,@(R,C(R,C(R,C(R,C(PT*#0H-”@T*#0H-”@T171H97)N971)
M;G1E<F9A8V4N;R Z($5T:&5R;F5T26YT97)F86-E+F-P<"!%=&AE<FYE=$EN
M=&5R9F%C92YH(" @(%5$4%-O8VME="YH( T"4!E8VAO($-O;7!I;&EN9R!%
M=&AE<FYE=$EN=&5R9F%C92YC<’ -”@D))“A#4D5!5$5?3T)7T1)4BD-"@D)
M0"0H0T,I("0H0V]N9FEG=7)A=&EO;D-04$-O;7!I;&53=VET8VAE<RD@("UL
M<V]C:V5T(“UO($5T:&5R;F5T26YT97)F86-E+F@171H97)N971);G1E<F9A
M8V4N8W!P#0H-”@T#0H-“D=U;DYE=$EN=&5R9F%C92YO(#H@1W5N3F5T26YT
M97)F86-E+F-P<”!’=6Y.971);G1E<F9A8V4N:” @(”!%=&AE<FYE=$EN=&5R
M9F%C92YH( T*“4!E8VAO($-O;7!I;&EN9R!’=6Y.971);G1E<F9A8V4N8W!P
M#0H)“20H0U)%051%7T]“2E]$25(I#0H)“4 D*$-#2 D$-O;F9I9W5R871I
M;VY#4%!#;VUP:6QE4W=I=&-H97,I(” M;’-O8VME=” M;R!’=6Y.971);G1E
M<F9A8V4N;R!’=6Y.971);G1E<F9A8V4N8W!P#0H-”@T*#0H-“E5$4%-O8VME
M=“YO(#H@54104V]C:V5T+F-P<”!51%!3;V-K970N:” @(” -”@E 96-H;R!#
M;VUP:6QI;F<@54104V]C:V5T+F-P< T*"0DD*$-214%415]/0DI?1$E20T
M"0E )“A#0RD@)“A#;VYF:6=U<F%T:6]N0U!00V]M<&EL95-W:71C:&5S2 @
M+6QS;V-K970@+6@54104V]C:V5T+F@54104V]C:V5T+F-P< T#0H-”@T*
M#0H-”@T*#0HD*%1!4D=%5%]-04E.20H3T)7T585"D@.B D%1!4D=%5%]-
M04E.20H0U!07T585"D@)"A/0DI30T"4!E8VAO($-O;7!I;&EN9R D*%1!
M4D=%5%]-04E.20H0U!07T585"D-"@E )"A#0RD@)"A#;VYF:6=U<F%T:6]N
M0U!00V]M<&EL95-W:71C:&5S2 M;R @)"A405)‘151?34%)3BDD*$]"2E]%
M6%0I("0H5$%21T547TU!24XI)"A#4%!?15A40T#0H-"B,C(R,C(R,C(R,C
M(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C
M(R,C(R,C(R,C(R,C#0HC(R,C(R,C(R,C(R,C(R!0<F5D969I;F5D($EN<W1R
M=6-T:6]N<R C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(R,C(PT*)"A405)’
M151?3D%-12DD*$5815]%6%0I.B D*$]"2E,I("0H041$251)3TY!3%]/0DI3
M2 D%1!4D=%5%]-04E.20H3T)7T585"D@4$-#7TE415)!5$E/3C$N;6%K
M#0H)0&5C:&@3&EN:VEN9R D%1!4D=%5%].04U%20H15A%7T585"D@#0H)
M0"0H3$E.2U]#340I(" D%1!4D=%5%]-04E.20H3T)7T585"D@)"A/0DI3
M2 D$%$1$E424].04Q?3T)4RD@7 T"20H3$E"4RD@7 T"20H24Y35%],
M24)32!<#0H))"A/6$9?3$E"4RD@7 T"20H24Y35%],24)32!<#0H))"A3
M3T-+7TQ)0BD@7 T"20H3$E.2U]&3$%'4RD@+6@)"A405)'151?3D%-12DD
M*$5815]%6%0I#0H-"B0H5$%21T547TY!344I)"A,24)?15A42 Z("0H3T)
M4RD@)"A!1$1)5$E/3D%,7T]"2E,I(%!#0U])5$52051)3TXQ+FUA:PT*“4!E
M8VAO($)U:6QD:6YG(&QI8G)A<GD@)$ -”@E )"A,24)?0TU$2 D$Q)0E]&
M3$%'4RD@+6@)"A405)'151?3D%-12DD*$Q)0E]%6%0I(“0H3T)4RD@)"A!
M1$1)5$E/3D%,7T]“2E,I#0H-”@T#0IC;&5A;CH-”@E 96-H;R!#;&5A;G5P
M#0H))"A232D@171H97)N971);G1E<F9A8V4N;PT*"20H4DTI($=U;DYE=$EN
M=&5R9F%C92YO#0H))“A232D@54104V]C:V5T+F-”@DD*%)-2 D%1!4D=%
M5%]-04E.20H3T)7T585"D@)"A!1$1)5$E/3D%,7T]"2E,I#0H))"A232D@
M)"A405)'151?3D%-12DD$Q)0E]%6%0I#0H))"A232D@)"A405)'151?3D%-
A12DD$5815]%6%0I#0H))"A#3$5!3E]/0DI?1$E20T
`
end
Hi Bob,
Do you have libsocket.so.2 on your target? The symbols that it’s complaining
about are in the libsocket.so.2 but are NOT in libsocket.so.1.
Regards,
Barry F.
Bob miles <rmiles@radamec.co.uk> wrote in message
news:b3i4j8$pc1$1@inn.qnx.com…
Hi
There are no errors when compiling and linking, the only errors I get are
when trying to
execute the program on the target which are stated below, which seem to be
some setup/configuration
problem when trying to run this application on the target.What make file do you want me to post ? I have attached that which built
my
executable -
This was compiled and linked on a Windows 2000 platform .
I am using the “INSTRUMENTATION,None” option. This was built through
Rhapsody
(a software CAD package).The operating system was built straight from QNX 6.2 CD with no
tayloring -
all I put in was the
Host IP address.Cheers
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3gmpg$si$> 1@nntp.qnx.com> …
Can you please post your makefile and the errors that are generated?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3f9hm$g15$> 1@inn.qnx.com> …
BarryI tried the compiler option but still have the same end result .
Is it looking for some DLLs or something that cause the unresolves -
do
I
have
to tell compiler/linker where these are ?
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3deaf$mm3$> 1@nntp.qnx.com> …
Hi Bob,Did you link against the socket library when you built it,
(-lsocket option to qcc)?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3d7dd$5vt$> 1@inn.qnx.com> …
HiI have written an app which attempts to open a socket and send
data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
\
Try running with DL_DEBUG=1(export).That should tell you which files is it
looking for
Sreekanth
“OS Support” <os@qnx.com> wrote in message news:b3lbis$40k$1@nntp.qnx.com…
Hi Bob,
Do you have libsocket.so.2 on your target? The symbols that it’s
complaining
about are in the libsocket.so.2 but are NOT in libsocket.so.1.Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3i4j8$pc1$> 1@inn.qnx.com> …
HiThere are no errors when compiling and linking, the only errors I get
are
when trying to
execute the program on the target which are stated below, which seem to
be
some setup/configuration
problem when trying to run this application on the target.What make file do you want me to post ? I have attached that which
built
my
executable -
This was compiled and linked on a Windows 2000 platform .
I am using the “INSTRUMENTATION,None” option. This was built through
Rhapsody
(a software CAD package).The operating system was built straight from QNX 6.2 CD with no
tayloring -
all I put in was the
Host IP address.Cheers
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3gmpg$si$> 1@nntp.qnx.com> …
Can you please post your makefile and the errors that are generated?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3f9hm$g15$> 1@inn.qnx.com> …
BarryI tried the compiler option but still have the same end result .
Is it looking for some DLLs or something that cause the unresolves -
do
I
have
to tell compiler/linker where these are ?
BOB
“OS Support” <> os@qnx.com> > wrote in message
news:b3deaf$mm3$> 1@nntp.qnx.com> …
Hi Bob,Did you link against the socket library when you built it,
(-lsocket option to qcc)?Regards,
Barry F.Bob miles <> rmiles@radamec.co.uk> > wrote in message
news:b3d7dd$5vt$> 1@inn.qnx.com> …
HiI have written an app which attempts to open a socket and send
data
I get the following when runningCould not resolve all symboles
unresolved symbol warnx
unresolved symbol err
unresolved symbol syslog
unresolved symbol warn
could not resolve symbols
Any ideas ?
Bob
\