Input Driver Development Kit Now in Beta !!!

QNX Newsgroups (Archives) qdn.public.ddk.input
1

message unavailable

2

Tue Feb 13 2001 - USB Driver Development Kit Now in Beta !!!

The USB Driver Development Beta Package is now available at the following
location:

http://betas.qnx.com/input_ddk/

username: ddkbeta
passwd : ddkbeta

Simply add this repository and point it at the correct url,
then enable userid & passwd.

  1. Start the Package Manager
  2. Choose Add Repository
  3. Point it at the correct url → http://betas.qnx.com/input_ddk/
  4. Disable/Uncheck the box → Use anonymous login
  5. Enter
    Username → ddkbeta
    Password → ddkbeta
  6. Install the software !!


    You will have to agree to the Click-Thru beta agreement to install this
    software.

Happy beta testing !!


thanx
ben
QA
QSS

3

Tue Feb 13 2001 - Input Driver Development Kit Now in Beta !!!

The Input Driver Development Beta Package is now available at the following
location:

http://betas.qnx.com/input_ddk/

username: ddkbeta
passwd : ddkbeta

Simply add this repository and point it at the correct url,
then enable userid & passwd.

  1. Start the Package Manager
  2. Choose Add Repository
  3. Point it at the correct url → http://betas.qnx.com/input_ddk/
  4. Disable/Uncheck the box → Use anonymous login
  5. Enter
    Username → ddkbeta
    Password → ddkbeta
  6. Install the software !!


    You will have to agree to the Click-Thru beta agreement to install this
    software.

Happy beta testing !!


thanx
ben
QA
QSS

4

I’d try to complie and use elo driver come w/ input ddk, it correcttly
report the xy position of finger press everytime now. But the controller
LED
still quickly flash, and the click event can’t been emit everytime. Any one
can help me please?

“Steve Lam” <> steve@cyberliving.com.hk> > ¼¶¼g©ó¶l¥ó
news:967nih$suu$> 1@inn.qnx.com> …
Hi,

I’m building a RTP testing unit w/ ELO accutouch 2210 serial
touchscreen.
When I run the elotouch driver “devi-elo smartset uart -i4 -p3f8 abs”,
the
LED on touchscreen controller board get flash quickly, which indicate
that
there are some communication error as descript in accutouch manual. When
I
touch the screen, the cursor disappear.

I try to run “calib” to calibate the touchscreen, but it didn’t respone
any
more, so I create the “acalib.localhost” file manually. When I load the
driver again “devi-elo -vvvvv smartset uart -i4 -p3f8 abs”, the console
messages report that the driver read the calibation file and got all the
XLow, XHigh, YLow and YHigh value, after that, when I touch the screen,
some
time the cursor follow my finger but some time not, and also the click
event
didn’t emmited to the objects I touch most of time.

Is there any body ever use accutouch 2210 successfully w/ RTP? Is that
my
configuration error or the driver didn’t support this model?

Steve Lam


\

5

Hi Steve,

Have you tried to use it with fd device module? If yes, did you have the
same problem?

Alex Chapiro (R&D)
QNX Software Systems, Ltd.

Steve Lam wrote in message <96dgqf$isr$1@inn.qnx.com>…

I’d try to complie and use elo driver come w/ input ddk, it correcttly
report the xy position of finger press everytime now. But the controller
LED
still quickly flash, and the click event can’t been emit everytime. Any
one
can help me please?


“Steve Lam” <> steve@cyberliving.com.hk> > ¼¶¼g©ó¶l¥ó
news:967nih$suu$> 1@inn.qnx.com> …
Hi,

I’m building a RTP testing unit w/ ELO accutouch 2210 serial
touchscreen.
When I run the elotouch driver “devi-elo smartset uart -i4 -p3f8 abs”,
the
LED on touchscreen controller board get flash quickly, which indicate
that
there are some communication error as descript in accutouch manual.
When
I
touch the screen, the cursor disappear.

I try to run “calib” to calibate the touchscreen, but it didn’t respone
any
more, so I create the “acalib.localhost” file manually. When I load the
driver again “devi-elo -vvvvv smartset uart -i4 -p3f8 abs”, the console
messages report that the driver read the calibation file and got all
the
XLow, XHigh, YLow and YHigh value, after that, when I touch the screen,
some
time the cursor follow my finger but some time not, and also the click
event
didn’t emmited to the objects I touch most of time.

Is there any body ever use accutouch 2210 successfully w/ RTP? Is that
my
configuration error or the driver didn’t support this model?

Steve Lam




\

6

Hi Alex

Thank you very much, I got fd device only work with the new version devi-elo
now.

Thanks

“Alex Chapiro” <achapiro@qnx.com> ¼¶¼g©ó¶l¥ó
news:96eomj$5lj$1@nntp.qnx.com…

Hi Steve,

Have you tried to use it with fd device module? If yes, did you have the
same problem?

Alex Chapiro (R&D)
QNX Software Systems, Ltd.

Steve Lam wrote in message <96dgqf$isr$> 1@inn.qnx.com> >…
I’d try to complie and use elo driver come w/ input ddk, it correcttly
report the xy position of finger press everytime now. But the controller
LED
still quickly flash, and the click event can’t been emit everytime. Any
one
can help me please?


“Steve Lam” <> steve@cyberliving.com.hk> > ¼¶¼g©ó¶l¥ó
news:967nih$suu$> 1@inn.qnx.com> …
Hi,

I’m building a RTP testing unit w/ ELO accutouch 2210 serial
touchscreen.
When I run the elotouch driver “devi-elo smartset uart -i4 -p3f8
abs”,
the
LED on touchscreen controller board get flash quickly, which indicate
that
there are some communication error as descript in accutouch manual.
When
I
touch the screen, the cursor disappear.

I try to run “calib” to calibate the touchscreen, but it didn’t
respone
any
more, so I create the “acalib.localhost” file manually. When I load
the
driver again “devi-elo -vvvvv smartset uart -i4 -p3f8 abs”, the
console
messages report that the driver read the calibation file and got all
the
XLow, XHigh, YLow and YHigh value, after that, when I touch the
screen,
some
time the cursor follow my finger but some time not, and also the
click
event
didn’t emmited to the objects I touch most of time.

Is there any body ever use accutouch 2210 successfully w/ RTP? Is
that
my
configuration error or the driver didn’t support this model?

Steve Lam






\

7

Driver Development Kits Moved !!!

The DDK packages have all been put into the same repository, so if you were
having problems downloading the original url please try the new one.

Sorry for the inconvenience.

All of the Driver Development Beta Packages are now available at the following
location:

http://betas.qnx.com/ddk/

username: ddkbeta
passwd : ddkbeta

Simply add this repository and point it at the correct url,
then enable userid & passwd.

  1. Start the Package Manager
  2. Choose Add Repository
  3. Point it at the correct url → http://betas.qnx.com/ddk/
  4. Disable/Uncheck the box → Use anonymous login
  5. Enter
    Username → ddkbeta
    Password → ddkbeta
  6. Install the software !!


    You will have to agree to the Click-Thru beta agreement to install this
    software.



    Happy beta testing !!


    thanx
    ben
8

Actualy we have installed the Accutouch touch scrren system and now we need
to change the touchscreen to ELO Intellitouch EL 1525 C IT …

The version is QNX 4.23 and use the Windows Enviroment.

Can somebody tell me how i can do it?

Tanhk you

Luis Gonzalez