Working Apache Build for Neutrino

QNX Newsgroups (Archives) qdn.public.qnxrtp.porting
1

Hi,

I am looking for a working port of Apache for QNX Neutrino that builds with
support for PHP.

All the versions I have tried so far fail in some way or another. I do not
have the time to get apache working at present and would think that someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31 0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its subsidiaries
or associates.

2

http://www.qnxzone.com/downloads/PostgreSQL/

You will find apache, pqsql and php all build for 6.2.0. The goal is to
have packages on the 6.2.1 3rd Party CDROM that will provide a simular
function.

chris


Simon A. Platten <simon.platten@vtcontrols.co.uk> wrote:

Hi,

I am looking for a working port of Apache for QNX Neutrino that builds with
support for PHP.

All the versions I have tried so far fail in some way or another. I do not
have the time to get apache working at present and would think that someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31 0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its subsidiaries
or associates.

–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

3

Chris McKillop <cdm@qnx.com> wrote:

http://www.qnxzone.com/downloads/PostgreSQL/
You will find apache, pqsql and php all build for 6.2.0. The goal is to

Those were built for 6.1.0 by Igor.
Based on the dates of those files, it shouldn’t be too difficult to guess :slight_smile:
YMMV if you want to use them on 6.2


have packages on the 6.2.1 3rd Party CDROM that will provide a simular
function.

chris



Simon A. Platten <> simon.platten@vtcontrols.co.uk> > wrote:
Hi,

I am looking for a working port of Apache for QNX Neutrino that builds with
support for PHP.

All the versions I have tried so far fail in some way or another. I do not
have the time to get apache working at present and would think that someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31 0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its subsidiaries
or associates.


\

Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

4

http://www.qnxzone.com/~fliu/

That is the new one, sorry.

chris


liug <liug@mama.indstate.edu> wrote:

Chris McKillop <> cdm@qnx.com> > wrote:
http://www.qnxzone.com/downloads/PostgreSQL/
You will find apache, pqsql and php all build for 6.2.0. The goal is to

Those were built for 6.1.0 by Igor.
Based on the dates of those files, it shouldn’t be too difficult to guess > :slight_smile:
YMMV if you want to use them on 6.2


have packages on the 6.2.1 3rd Party CDROM that will provide a simular
function.

chris


Simon A. Platten <> simon.platten@vtcontrols.co.uk> > wrote:
Hi,

I am looking for a working port of Apache for QNX Neutrino that builds with
support for PHP.

All the versions I have tried so far fail in some way or another. I do not
have the time to get apache working at present and would think that someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31 0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its subsidiaries
or associates.


\

Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

5

Thanks :slight_smile:

“Chris McKillop” <cdm@qnx.com> wrote in message
news:avctqh$mia$1@nntp.qnx.com…

http://www.qnxzone.com/~fliu/

That is the new one, sorry.

chris


liug <> liug@mama.indstate.edu> > wrote:
Chris McKillop <> cdm@qnx.com> > wrote:
http://www.qnxzone.com/downloads/PostgreSQL/
You will find apache, pqsql and php all build for 6.2.0. The goal is
to

Those were built for 6.1.0 by Igor.
Based on the dates of those files, it shouldn’t be too difficult to
guess > :slight_smile:
YMMV if you want to use them on 6.2


have packages on the 6.2.1 3rd Party CDROM that will provide a simular
function.

chris


Simon A. Platten <> simon.platten@vtcontrols.co.uk> > wrote:
Hi,

I am looking for a working port of Apache for QNX Neutrino that builds
with
support for PHP.

All the versions I have tried so far fail in some way or another. I
do not
have the time to get apache working at present and would think that
someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are
now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk,
NR31 0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do
not
necessarily
represent those of VT Group, its holding company or any of its
subsidiaries
or associates.


\

Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I
get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/


\

Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

6

I have downloaded all the files and followed the instructions exactly. I am
running 6.2

I created a user and group called nobody. When I type:

…/apachectl start

I get:

unknown symbol: openlog
unknown symbol: syslog
Could not resolve all symbols
…/apachectl start: httpd could not be started

Any ideas, I’ve searched apache.org and could find nothing.

“Simon A. Platten” <simon.platten@vtcontrols.co.uk> wrote in message
news:avc07q$89u$1@inn.qnx.com…

Hi,

I am looking for a working port of Apache for QNX Neutrino that builds
with
support for PHP.

All the versions I have tried so far fail in some way or another. I do
not
have the time to get apache working at present and would think that
someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31
0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its
subsidiaries
or associates.

7

Simon A. Platten <simon.platten@vtcontrols.co.uk> wrote:

I have downloaded all the files and followed the instructions exactly. I am
running 6.2

Are you sure you are running 6.2? what does “uname -a” say?

8

I have it all running now. I re-installed 6.2 and it burst into life.

“liug” <liug@mama.indstate.edu> wrote in message
news:avf49d$ovf$1@inn.qnx.com…

Simon A. Platten <> simon.platten@vtcontrols.co.uk> > wrote:
I have downloaded all the files and followed the instructions exactly.
I am
running 6.2

Are you sure you are running 6.2? what does “uname -a” say?

9

Hugo <hcampagna@oerlikon.ca> wrote:

I try to compile apache for neutrino but has a powerpc target, not x86. I’m
not able to cross compile apache for power-pc properly…

Do you have any clue for me

What happens when you try?

chris

–
Chris McKillop <cdm@qnx.com> “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/

10

I try to compile apache for neutrino but has a powerpc target, not x86. I’m
not able to cross compile apache for power-pc properly…

Do you have any clue for me

Thanks

Hugo C. (hcampagna@oerlikon.ca)

“Simon A. Platten” <simon.platten@vtcontrols.co.uk> wrote in message
news:avc07q$89u$1@inn.qnx.com…

Hi,

I am looking for a working port of Apache for QNX Neutrino that builds
with
support for PHP.

All the versions I have tried so far fail in some way or another. I do
not
have the time to get apache working at present and would think that
someone
has already done this.

I’ve checked the various postings in the newsgroups, some of which are now
dead links. Thank you

–
Simon Platten, Senior Software Engineer

VT Controls
Bessemer Way, Harfreys Industrial Estate, Great Yarmouth, Norfolk, NR31
0LX.
Tel: (0)1493 668811 Fax: (0)1493 651137
Email: > simon.platten@vtcontrols.co.uk

Any views or opinions expressed are solely those of the author and do not
necessarily
represent those of VT Group, its holding company or any of its
subsidiaries
or associates.