Hi 
Just playing around with MomenticsPE and I have some Tecnologic TS5300
boards lying around.
They have an Elan520 and boot from compact flash as an ide device.
What are options for boot an image ?..DOS and loadqnx.sys ?
Anyone have a generic 520 build file ?
ie. Where sould i start ?
Thanks,
Rusty.
www.fishertechnical.com
Hey Rusty,
We also use the TS5300. I used my ipaq with eQip (qnx) to make a bootable CF
card.
I had to adjust the bios.boot because there is no keyboard controller on the
TS5300,
and the default bios.boot couldn’t deal with it. It will boot with the
default
bios.boot if you attach a TS9500 peripheral board (has a keyboard
controller).
Martin.
“Rusty” <nospam@nospam.com> schreef in bericht
news:b0khad$8tu$1@inn.qnx.com…
Hi >
Just playing around with MomenticsPE and I have some Tecnologic TS5300
boards lying around.
They have an Elan520 and boot from compact flash as an ide device.
What are options for boot an image ?..DOS and loadqnx.sys ?
Anyone have a generic 520 build file ?
ie. Where sould i start ?Thanks,
Rusty.
www.fishertechnical.com
\
Yes works very well
Only problem is “pdebug 8000 &” = “Unable to initialize port 8000”
any ideas ?
Many thanks,
Rusty.
www.fishertechnical.com
“Martin Kraan” <kraan@romesq.nl> wrote in message
news:b0lhh6$bps$1@inn.qnx.com…
Hey Rusty,
We also use the TS5300. I used my ipaq with eQip (qnx) to make a bootable
CF
card.
I had to adjust the bios.boot because there is no keyboard controller on
the
TS5300,
and the default bios.boot couldn’t deal with it. It will boot with the
default
bios.boot if you attach a TS9500 peripheral board (has a keyboard
controller).Martin.
“Rusty” <> nospam@nospam.com> > schreef in bericht
news:b0khad$8tu$> 1@inn.qnx.com> …
Hi >Just playing around with MomenticsPE and I have some Tecnologic TS5300
boards lying around.
They have an Elan520 and boot from compact flash as an ide device.
What are options for boot an image ?..DOS and loadqnx.sys ?
Anyone have a generic 520 build file ?
ie. Where sould i start ?Thanks,
Rusty.
www.fishertechnical.com
\
Ooops.
hehehe…had qconn living there
Works great …
What did you modify in bios.boot for the keyboard issue ?
R.
“Rusty” <nospam@nospam.com> wrote in message
news:b0mua9$1vn$1@inn.qnx.com…
Yes works very well >
Only problem is “pdebug 8000 &” = “Unable to initialize port 8000”
any ideas ?
Many thanks,
Rusty.
www.fishertechnical.com“Martin Kraan” <> kraan@romesq.nl> > wrote in message
news:b0lhh6$bps$> 1@inn.qnx.com> …
Hey Rusty,We also use the TS5300. I used my ipaq with eQip (qnx) to make a
bootable
CF
card.
I had to adjust the bios.boot because there is no keyboard controller on
the
TS5300,
and the default bios.boot couldn’t deal with it. It will boot with the
default
bios.boot if you attach a TS9500 peripheral board (has a keyboard
controller).Martin.
“Rusty” <> nospam@nospam.com> > schreef in bericht
news:b0khad$8tu$> 1@inn.qnx.com> …
Hi >Just playing around with MomenticsPE and I have some Tecnologic TS5300
boards lying around.
They have an Elan520 and boot from compact flash as an ide device.
What are options for boot an image ?..DOS and loadqnx.sys ?
Anyone have a generic 520 build file ?
ie. Where sould i start ?Thanks,
Rusty.
www.fishertechnical.com
\
I think only I commented out the part where the ‘slow keyboard controller
gate A20’ is tried.
Not 100% sure though (can’t look it up right now).
Martin.
“Rusty” <nospam@nospam.com> schreef in bericht
news:b0n9rt$d5t$1@inn.qnx.com…
Ooops.
hehehe…had qconn living there >Works great >
What did you modify in bios.boot for the keyboard issue ?
R.
“Rusty” <> nospam@nospam.com> > wrote in message
news:b0mua9$1vn$> 1@inn.qnx.com> …
Yes works very well >Only problem is “pdebug 8000 &” = “Unable to initialize port 8000”
any ideas ?
Many thanks,
Rusty.
www.fishertechnical.com“Martin Kraan” <> kraan@romesq.nl> > wrote in message
news:b0lhh6$bps$> 1@inn.qnx.com> …
Hey Rusty,We also use the TS5300. I used my ipaq with eQip (qnx) to make a
bootable
CF
card.
I had to adjust the bios.boot because there is no keyboard controller
on
the
TS5300,
and the default bios.boot couldn’t deal with it. It will boot with the
default
bios.boot if you attach a TS9500 peripheral board (has a keyboard
controller).Martin.
“Rusty” <> nospam@nospam.com> > schreef in bericht
news:b0khad$8tu$> 1@inn.qnx.com> …
Hi >Just playing around with MomenticsPE and I have some Tecnologic
TS5300
boards lying around.
They have an Elan520 and boot from compact flash as an ide device.
What are options for boot an image ?..DOS and loadqnx.sys ?
Anyone have a generic 520 build file ?
ie. Where sould i start ?Thanks,
Rusty.
www.fishertechnical.com
\