devp-pccard: No PCMCIA or CardBus Adapters found – exiting

I’m trying to port a QNX 6.1.0 application from a Panasonic Toughbook CF-28MCFAXEM to a Panasonic Toughbook CF-29LTQGZBM. devp-pccard is not finding the CardBus controller. The driver exits. /dev/pccard does not exist. enum-pccard and pin exit because the driver is not running.

The CardBus controller model did change slightly. The old model was a Ricoh RLc478 and the new model is a Ricoh RL5c476. I’ve attached the pci –vvvv output for both systems. I also ran devp-pccard –vvvv for both systems and attached the stdout and sloginfo output.

Other topics have suggested changing the BIOS PCMCIA settings. I don’t have any BIOS PCMCIA settings to set to 16-bit. I’m actually trying to get a Xircom Realport CardBus Ethernet 10/100+Modem 56 card running. I don’t think that actually matters since I’m not getting that far.

I’d appreciate any help, Dennis.