Chris McKillop wrote:
sam <> g_hullur@yahoo.com> > wrote:
Hello,
I am having a Orinoco wireless card on aboard.
I want to configure it.
An Acess Point is configured with SSID “mach” & Channel 6
First devp-pccard is running , then i started the io-net with orinoco
shared object as…
slay io-net
#io-net -dorinoco network =mach,channel=6 -ptcpip
I assume the space between network and = is a typo. > 
Does the device show up in the output of “pin”? There are some newer
orinoco’s that we don’t support based on a newer cardbus interface.
You should also check the output from sloginfo after you attempt to load
the driver. You might even want to pass ,verbose to it as well.
chris
–
Chris McKillop <> cdm@qnx.com> > “The faster I go, the behinder I get.”
Software Engineer, QSSL – Lewis Carroll –
http://qnx.wox.org/
Please find below the otupt of pin, ionet in verbose & ifconfig en0.Also
the output of sloginfo
After Configuring IP Address i am trying to ping to our server.
O/P of Sloginfo
Time Sev Major Minor Args
Jan 01 00:29:41 2 19 0 eide_identify_devices: VIA 82C586A/B vid
1106, did 571, class 1018a rev 6, busno 0, dfunc 39
Jan 01 00:29:41 2 19 0 eide_identify_devices: cmd_addr 1f0,
cntl_addr 3f4, irq e, chnl 0, udma 5, mdma 2, sdma 0, pio 4
Jan 01 00:29:41 2 19 0 eide_display_devices: ST38410A
tid 0, cable 80, max udma 4, cur udma 4, max mdma 0, cur mdma 2, max sdma
-1, cur sdma -1, pio 4, mblk 2
Jan 01 00:29:41 2 19 0 eide_identify_devices: VIA 82C586A/B vid
1106, did 571, class 1018a rev 6, busno 0, dfunc 39
Jan 01 00:29:41 2 19 0 eide_identify_devices: cmd_addr 170,
cntl_addr 374, irq f, chnl 1, udma 5, mdma 2, sdma 0, pio 4
Jan 01 00:29:41 2 19 0 eide_init_devices: ST38410A path
0, tid 0, udma 4, mdma 2, sdma -1, pio 4, mblk 2
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: path=0, target=0,
lun=0, cam_status=c4, scsi_status=2
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: error=70, sense=5,
asc=24, ascq=0
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: SK_ILLEGAL command
1a in databyte
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: path=0, target=0,
lun=0, cam_status=c4, scsi_status=2
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: error=70, sense=5,
asc=24, ascq=0
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: SK_ILLEGAL command
5a in databyte
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: path=0, target=0,
lun=0, cam_status=c4, scsi_status=2
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: error=70, sense=5,
asc=24, ascq=0
Jan 01 00:29:41 2 5 0 scsi_interpret_sense: SK_ILLEGAL command
5a in databyte
Jan 01 00:29:53 5 3 400 [8] fs-pkg built: May 17 2003 09:19:10
Jan 01 00:30:03 5 3 400 Package config file
[/etc/system/package/packages]
Jan 01 00:30:04 5 6 200 Installing /dev/par port 378
Jan 01 00:30:05 5 14 0 tcpip starting
Jan 01 00:30:05 3 14 0 Using pseudo random generator. See
“random” option
Jan 01 00:30:09 2 8 0 unable to get path to config file
Jan 01 00:30:09 1 8 0 phfont_init
Jan 01 00:30:09 1 8 0 phfontXX started OK - EOK
Jan 01 00:30:09 1 8 0 posted
Jan 01 00:30:09 1 8 0 MainLoop
Jan 01 00:30:09 5 8 0 Plugin gri-photon.so opened successfully
Jan 01 00:30:09 5 8 0 Opened photon connection:
Jan 01 00:30:09 6 8 0 VGA primary : bus 0x1 dev/func 0x0
Jan 01 00:30:09 6 8 0 Found 1 PCI/AGP display devices
Jan 01 00:30:09 6 8 0 pci_init: found PCI device 5333:8d01
Jan 01 00:30:09 6 8 0 SetDisplayOffset pos: 0 0
Jan 01 00:30:09 6 8 0 SetDisplayOffset pos: 0 0
Jan 01 00:30:12 5 9 0 Start: /usr/photon/bin/devi-hirun kbd fd
-d/dev/kbd ps2 mousedev
Jan 01 00:30:34 2 18 0 devp-pccard: Terminated by signal 15
Jan 01 00:30:52 5 18 0 Socket state 80
Jan 01 00:30:52 5 18 0 Card Inserted
Jan 01 00:30:52 5 18 0 3.3V Card
Jan 01 00:30:53 5 18 0 Powered up 2
Jan 01 00:30:53 5 18 0 devp-pccard: Memory window req. a0000
Jan 01 00:30:53 5 18 0 devp-pccard: Memory window act. d4000
Jan 01 00:30:54 5 18 0 Socket state c0
Jan 01 00:30:54 5 18 0 Card Inserted
Jan 01 00:31:52 5 18 0 io_open for id = 7
Jan 01 00:31:54 5 14 0 tcpip starting
Jan 01 00:31:54 3 14 0 Using pseudo random generator. See
“random” option
Jan 01 00:32:10 2 8 0 Service cmd 0x22 returned errno 22
Jan 01 00:33:02 2 10 0 devn-orinoco: Tx Timeout Expired.
Jan 01 00:33:12 2 10 0 devn-orinoco: Tx Timeout Expired.
Jan 01 00:35:11 2 10 0 devn-orinoco: Tx Timeout Expired.
Jan 01 00:35:14 2 10 0 devn-orinoco: Tx Timeout Expired.
Jan 01 00:35:16 2 10 0 devn-orinoco: Tx Timeout Expired.
Jan 01 00:35:18 2 10 0 devn-orinoco: Tx Timeout Expired.
pin
Sock Func Type Flags PID Base Size IRQ
1 Empty ----MF---------- None
1 Empty ----MF---------- None
2 0 Network C—I-±-------- None 0x300 64 7
2 Empty ----MF---------- None
io-net -dorinoco network=mach,mode=normal,channel=6,verbose=3 -ptcpip
ORiNOCO
Vendor … 0x0
Device … 0x0
Revision … 0x0
I/O port base … 0x300
Interrupt … 0x7
MAC address … 00904b 010011
ifconfig en0 192.168.0.13
ifconfig en0
en0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:90:4b:01:00:11
media: autoselect
status: unknown
inet 192.168.0.13 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::290:4bff:fe01:11%en0 prefixlen 64 scopeid 0x2