Problems with DLink DWL-520

I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator. See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?

Could you please provide the full ‘pci -v’ output as well as the output from
sloginfo after starting the driver in verbose mode as follows:

slay io-net
io-net -dprism verbose=4 -ptcpip
sloginfo > file

Also, please provide the command line that you are using to start io-net.

“Keith A. Flick” <kaflick@sev.org> wrote in message
news:c2qf54$860$1@inn.qnx.com

I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator. See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?

“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:c349rt$aim$1@inn.qnx.com

Could you please provide the full ‘pci -v’ output as well as the output
from
sloginfo after starting the driver in verbose mode as follows:

slay io-net
io-net -dprism verbose=4 -ptcpip
sloginfo > file

Also, please provide the command line that you are using to start io-net.

It doesn’t seem to matter what command I use, this was taken using

io-net -dprism verbose=4 -ptcpip.

the output from loginfo is:

Time Sev Major Minor Args
Mar 15 13:38:21 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 15 13:38:21 2 10 0 Prism Start driver failed

The output from pci -v is:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7180h, 82443LX/EX (PAC) Host/PCI bridge in 440LX/EX AGP
chipset
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = a290h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7181h, AGP device in 440LX/EX AGP chipset
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 2a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 22a0h
Memory Base = fff0h
Memory Limit = 0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 2ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB/EB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB/EB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB/EB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = 6400h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB/EB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
Class Codes = 028000h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e6000000h prefetchable 32bit length 4096 enabled
Subsystem Vendor ID = 1186h
Subsystem ID = 3700h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7e02h - 0h

Class = Display (VGA)
Vendor ID = 1013h, Cirrus Logic
Device ID = a8h, CL-GD5434 Alpine GUI Accelerator
PCI index = 0h
Class Codes = 030000h
Revision ID = fch
Bus number = 0
Device number = 12
Function num = 0
Status Reg = 0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e4000000h 32bit length 16777216 enabled
PCI Expansion ROM = e5000000h length 16777216 disabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = no connection




“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c2qf54$860$> 1@inn.qnx.com> …
I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator. See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?

\

begin 666 PCIV.TXT
M"E!#22!V97)S:6]N(" @(#T@,BXQ, H0VQA<W,@(" @(" @(" @/2!"<FED
M9V4@
$AO<W0O4$-)0I696YD;W(@240@(" @(" ](#@P.#9H+"!);G1E;"!#
M;W)P;W)A=&EO;B 1&5V:6-E($E$(" @(" @/2 W,3@P:“P@.#(T-#-,6”]%
M6" H4$%#2!(;W-T+U!#22!B<FED9V4@:6X@-#0P3%@O15@@04=0(&-H:7!S
M970
4$-)(&EN9&5X(" @(" @/2 P: I#;&%S<R!#;V1E<R @(" ](# V,# P
M,&@4F5V:7-I;VX@240@(" @/2 S: I"=7,@;G5M8F5R(" @(" ](# 1&5V
M:6-E(&YU;6)E<B @/2 P"D9U;F-T:6]N(&YU;2 @(#T@, I3=&%T=7,@4F5G
M(" @(" ](&$R.3!H"D-O;6UA;F0@4F5G(" @(#T@-F@2&5A9&5R('1Y<&4@
M(" @/2 P:"!3:6YG;&4M9G5N8W1I;VX
0DE35" @(" @(" @(" @/2 P:"!"
M=6EL9"UI;BUS96QF+71E<W0@;F]T(’-U<’!O<G1E9 I,871E;F-Y(%1I;65R
M(" ](#0P: I#86-H92!,:6YE(%-I>F4](#!H( I-87@@3&%T(" @(" @(" ]
M(#!N<PI-:6X@1VYT(" @(" @(" ](#!N<PI00TD@26YT(%!I;B @(" ]($Y#
M"DEN=&5R<G5P="!L:6YE(#T@, I#87!A8FEL:71I97,@4&]I;G1E<B ](&$P
M: I#87!A8FEL:71Y($E$(" @(" @(" ](#)H"D-A<&%B:6QI=&EE<R @(" @
M(" @(#T@,3!H(“T@,68P,# R,#-H@I#;&%S<R @(" @(" @(" ]($)R:61G
M92 H4$-)+U!#22D
5F5N9&]R($E$(" @(" @/2 X,#@V:“P@26YT96P@0V]R
M<&]R871I;VX@“D1E=FEC92!)1” @(” @(#T@-S$X,6@L("!!1U @9&5V:6-E
M(&EN(#0T,$Q8+T58($%'4"!C:&EP<V5T"E!#22!I;F1E>" @(" @(#T@,&@

M0VQA<W,@0V]D97,@(" @/2 P-C T,#!H"E)E=FES:6]N($E$(" @(#T@,V@

M0G5S(&YU;6)E<B @(" @/2 P"D1E=FEC92!N=6UB97(@(#T@,0I&=6YC=&EO
M;B!N=6T@(" ](# 4W1A='5S(%)E9R @(" @/2 R83!H"D-O;6UA;F0@4F5G
M(" @(#T@,3 W: I(96%D97(@='EP92 @(" ](#%H(%-I;F=L92UF=6YC=&EO
M;@I"25-4(" @(" @(" @(" ](#!H($)U:6QD+6EN+7-E;&8M=&5S="!N;W0@
M<W5P<&]R=&5D"DQA=&5N8WD@5&EM97(@(#T@-#!H"D-A8VAE($QI;F4@4VEZ
M93T@,&@@“E!R:6UA<GD@0G5S($YU;6)E<B @(” @(" ](#!H"E-E8V]N9&%R
M>2!"=7,@3G5M8F5R(" @(" ](#%H"E-U8F]R9&EN871E($)U<R!.=6UB97(@
M(" ](#%H"E-E8V]N9&%R>2!,871E;F-Y(%1I;65R(" ](#0P: I)+T@0F%S
M92 @(" @(" @(" @(" @(" @/2!E,&@22]/($QI;6ET(" @(" @(" @(" @
M(" @(#T@93!H"E-E8V]N9&%R>2!3=&%T=7,@(" @(" @(" ](#(R83!H"DUE
M;6]R>2!“87-E(” @(" @(" @(" @(" ](&9F9C!H"DUE;6]R>2!,:6UI=" @
M(" @(" @(" @(" ](#!H"E!R969E=&-H86)L92!-96UO<GD@0F%S92 ](&9F
M9C!H"E!R969E=&-H86)L92!-96UO<GD@3&EM:70](#!H"E!R969E=&-H86)L
M92!“87-E(%5P<&5R(#,R($)I=’,@(#T@,&@4’)E9F5T8VAA8FQE($QI;6ET
M(%5P<&5R(#,R($)I=’,@/2 P: I)+T@0F%S92!5<’!E<B Q-B!":71S(" @
M/2!F9F9F: I)+T@3&EM:70@57!P97(@,38@0FET<R @/2!F9F9F: I"<FED
M9V4@0V]N=’)O;" @(" @(" @(" @/2 R;G,4$-)($EN="!0:6X@(" @(" @
M(" @(" @(#T@3D,26YT97)R=7!T(&QI;F4@(" @(" @(" @(#T@, H0VQA
M<W,@(" @(" @(" @/2!"<FED9V4@
%!#22])4T$I"E9E;F1O<B!)1" @(" @
M(#T@.# X-F@L($EN=&5L($-O<G!O<F%T:6]N( I$979I8V4@240@(" @(" ]
M(#<Q,3!H+" X,C,W,4%"+T5"(%!)25@T($E302!"<FED9V4
4$-)(&EN9&5X
M(” @(" @/2 P: I#;&%S<R!#;V1E<R @(" ](# V,#$P,&@4F5V:7-I;VX@
M240@(" @/2 R: I"=7,@;G5M8F5R(" @(" ](# 1&5V:6-E(&YU;6)E<B @
M/2 W"D9U;F-T:6]N(&YU;2 @(#T@, I3=&%T=7,@4F5G(" @(" ](#(X,&@

M0V]M;6%N9"!296<@(" @/2!F: I(96%D97(@='EP92 @(" ](#!H($UU;'1I
M+69U;F-T:6]N"D))4U0@(" @(" @(" @(#T@,&@@0G5I;&0M:6XM<V5L9BUT
M97-T(&YO="!S=7!P;W)T960
3&%T96YC>2!4:6UE<B @/2 P: I#86-H92!,
M:6YE(%-I>F4](#!H( I-87@@3&%T(" @(" @(" ](#!N<PI-:6X@1VYT(" @
M(" @(" ](#!N<PI00TD@26YT(%!I;B @(" ]($Y#“DEN=&5R<G5P=”!L:6YE
M(#T@, H
0VQA<W,@(" @(" @(" @/2!-87-S(%-T;W)A9V4@
$E$12D
5F5N
M9&]R($E$(" @(" @/2 X,#@V:“P@26YT96P@0V]R<&]R871I;VX@“D1E=FEC
M92!)1” @(” @(#T@-S$Q,6@L(#@R,S<Q04(O14(@4$E)6#0@241%($-O;G1R
M;VQL97(4$-)(&EN9&5X(" @(" @/2 P: I#;&%S<R!#;V1E<R @(" ](# Q
M,#$X,&@4F5V:7-I;VX@240@(" @/2 Q: I"=7,@;G5M8F5R(" @(" ](# *
M1&5V:6-E(&YU;6)E<B @/2 W"D9U;F-T:6]N(&YU;2 @(#T@,0I3=&%T=7,@
M4F5G(" @(" ](#(X,&@0V]M;6%N9"!296<@(" @/2 U: I(96%D97(@=‘EP
M92 @(" ](#!H(%-I;F=L92UF=6YC=&EO;@I"25-4(" @(" @(" @(" ](#!H
M($)U:6QD+6EN+7-E;&8M=&5S="!N;W0@<W5P<&]R=&5D"DQA=&5N8WD@5&EM
M97(@(#T@-#!H"D-A8VAE($QI;F4@4VEZ93T@,&@@“E!#22!)3R!!9&1R97-S
M(” ](&8P,#!H(&QE;F=T:" Q-B!E;F%B;&5D"DUA>"!,870@(" @(" @(#T@
M,&YS"DUI;B!’;G0@(" @(" @(#T@,&YS"E!#22!);G0@4&EN(" @(#T@3D,

M26YT97)R=7!T(&QI;F4@/2 P"@I#;&%S<R @(" @(" @(" ](%-E<FEA;"!"
M=7,@
%5N:79E<G-A;"!397)I86P@0G5S
0I696YD;W(@240@(" @(" ](#@P
M.#9H+"!);G1E;"!#;W)P;W)A=&EO;B *1&5V:6-E($E$(" @(" @/2 W,3$R
M:“P@.#(S-S%!0B]%0B!024E8-”!54T(@26YT97)F86-E"E!#22!I;F1E>" @
M(" @(#T@,&@*0VQA<W,@0V]D97,@(" @/2 P8S S,#!H"E)E=FES:6]N($E$
M(" @(#T@,6@0G5S(&YU;6)E<B @(" @/2 P"D1E=FEC92!N=6UB97(@(#T@
M-PI&=6YC=&EO;B!N=6T@(" ](#(4W1A=‘5S(%)E9R @(" @/2 R.#!H"D-O
M;6UA;F0@4F5G(" @(#T@-6@2&5A9&5R('1Y<&4@(" @/2 P:"!3:6YG;&4M
M9G5N8W1I;VX
0DE35" @(" @(" @(" @/2 P:"!"=6EL9"UI;BUS96QF+71E
M<W0@;F]T(’-U<’!O<G1E9 I,871E;F-Y(%1I;65R(" ](#0P: I#86-H92!,
M:6YE(%-I>F4](#!H( I00TD@24@061D<F5S<R @/2 V-# P:"!L96YG=&@@
M,S(@96YA8FQE9 I-87@@3&%T(" @(" @(" ](#!N<PI-:6X@1VYT(" @(" @
M(" ](#!N<PI00TD@26YT(%!I;B @(" ]($E.5"!$“DEN=&5R<G5P=”!L:6YE
M(#T@,3$
“D-L87-S(” @(" @(" @(#T@0G)I9&=E("A5;FMN;W=N
0I696YD
M;W(@240@(" @(" ](#@P.#9H+"!);G1E;"!#;W)P;W)A=&EO;B *1&5V:6-E
M($E$(" @(" @/2 W,3$S:“P@.#(S-S%!0B]%0B!024E8-”!0;W=E<B!-86YA
M9V5M96YT($-O;G1R;VQL97(*4$-)(&EN9&5X(" @(" @/2 P: I#;&%S<R!#
M;V1E<R @(" ](# V.# P,&@*4F5V:7-I;VX@240@(" @/2 R: I"=7,@;G5M
M8F5R(" @(" ](# *1&5V:6-E(&YU;6)E<B @/2 W"D9U;F-T:6]N(&YU;2 @
M(#T@,PI3=&%T=7,@4F5G(" @(" ](#(X,&@*0V]M;6%N9"!296<@(" @/2 S
M: I(96%D97(@=‘EP92 @(" ](#!H(%-I;F=L92UF=6YC=&EO;@I"25-4(" @
M(" @(" @(" ](#!H($)U:6QD+6EN+7-E;&8M=&5S="!N;W0@<W5P<&]R=&5D
M"DQA=&5N8WD@5&EM97(@(#T@,&@*0V%C:&4@3&EN92!3:7IE/2 P:" *36%X
M($QA=" @(" @(" @/2 P;G,*36EN($=N=" @(" @(" @/2 P;G,*4$-)($EN
M="!0:6X@(" @/2!.0PI);G1E<G)U<‘0@;&EN92 ](# “D-L87-S(” @(" @
M(" @(#T@3F5T=V]R:R H56YK;F]W;BD
5F5N9&]R($E$(" @(" @/2 Q,C8P
M:“P@26YT97)S:6P@0V]R<&]R871I;VX@“D1E=FEC92!)1” @(” @(#T@,S@W
M,V@L($E33#,X-S1!(%!225–24DN-2!)144X,#(N,3%"(%=I<F5L97-S($Q!
M3@I00TD@:6YD97@@(" @(" ](#!H"D-L87-S($-O9&5S(" @(#T@,#(X,# P
M: I2979I<VEO;B!)1" @(" ](#%H"D)U<R!N=6UB97(@(" @(#T@, I$979I
M8V4@;G5M8F5R(" ](#$Q"D9U;F-T:6]N(&YU;2 @(#T@, I3=&%T=7,@4F5G
M(" @(" ](#(Y,&@0V]M;6%N9"!296<@(" @/2 W: I(96%D97(@='EP92 @
M(" ](#!H(%-I;F=L92UF=6YC=&EO;@I"25-4(" @(" @(" @(" ](#!H($)U
M:6QD+6EN+7-E;&8M=&5S="!N;W0@<W5P<&]R=&5D"DQA=&5N8WD@5&EM97(@
M(#T@-#!H"D-A8VAE($QI;F4@4VEZ93T@.&@@=6XM8V%C:&5A8FQE"E!#22!-
M96T@061D<F5S<R ](&4V,# P,# P:"!P<F5F971C:&%B;&4@,S)B:70@;&5N
M9W1H(#0P.38@96YA8FQE9 I3=6)S>7-T96T@5F5N9&]R($E$(#T@,3$X-F@

M4W5B<WES=&5M($E$(" @(" @(" ](#,W,#!H"DUA>"!,870@(" @(" @(#T@
M,&YS"DUI;B!’;G0@(" @(" @(#T@,&YS"E!#22!);G0@4&EN(" @(#T@24Y4
M($$26YT97)R=7!T(&QI;F4@/2 Q, I#87!A8FEL:71I97,@4&]I;G1E<B ]
M(&1C: I#87!A8FEL:71Y($E$(" @(" @(" ](#%H"D-A<&%B:6QI=&EE<R @
M(" @(" @(#T@-V4P,F@@+2 P: H
0VQA<W,@(" @(" @(" @/2!$:7-P;&%Y
M(“A61T$I"E9E;F1O<B!)1” @(" @(#T@,3 Q,V@L($-I<G)U<R!,;V=I8R *
M1&5V:6-E($E$(" @(" @/2!A.&@L($-,+4=$-30S-"!!;’!I;F4@1U5)($%C
M8V5L97)A=&]R"E!#22!I;F1E>" @(" @(#T@,&@0VQA<W,@0V]D97,@(" @
M/2 P,S P,#!H"E)E=FES:6]N($E$(" @(#T@9F-H"D)U<R!N=6UB97(@(" @
M(#T@, I$979I8V4@;G5M8F5R(" ](#$R"D9U;F-T:6]N(&YU;2 @(#T@, I3
M=&%T=7,@4F5G(" @(" ](#!H"D-O;6UA;F0@4F5G(" @(#T@,V@2&5A9&5R
M('1Y<&4@(" @/2 P:"!3:6YG;&4M9G5N8W1I;VX
0DE35" @(" @(" @(" @
M/2 P:"!"=6EL9"UI;BUS96QF+71E<W0@;F]T(’-U<’!O<G1E9 I,871E;F-Y
M(%1I;65R(" ](#!H"D-A8VAE($QI;F4@4VEZ93T@,&@@“E!#22!-96T@061D
M<F5S<R ](&4T,# P,# P:” S,F)I="!L96YG=&@@,38W-S<R,38@96YA8FQE
M9 I00TD@17AP86YS:6]N(%)/32 ](&4U,# P,# P:"!L96YG=&@@,38W-S<R
M,38@9&ES86)L960
36%X($QA=" @(" @(" @/2 P;G,*36EN($=N=" @(" @
M(" @/2 P;G,4$-)($EN="!0:6X@(" @/2!.0PI);G1E<G)U<'0@;&EN92 ]
0(&YO(&-O;FYE8W1I;VX
"@``
`
end

begin 666 PRISM.TXT
M5&EM92 @(" @(" @(" @("!3978@36%J;W(@36EN;W(@07)G<PI-87(@,34@
M,3,Z,S@Z,C$@(" @,B @(" Q," @(" @,"!D979N+7!R:7-M.B!P<FES;5]C
M9F=?8V%R9"@I(&9A:6QE9"X*36%R(#$U(#$S.C,X.C(Q(" @(#(@(" @,3 @
@(" @(# @4’)I<VT@4W1A<G0@9’)I=F5R(&9A:6QE9 H
end

The minimum requirement for starting the driver is an ssid. Do you specify
an ssid on the command line?

“Keith A. Flick” <kaflick@sev.org> wrote in message
news:c34s4s$p37$1@inn.qnx.com

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:c349rt$aim$> 1@inn.qnx.com> …
Could you please provide the full ‘pci -v’ output as well as the output
from
sloginfo after starting the driver in verbose mode as follows:

slay io-net
io-net -dprism verbose=4 -ptcpip
sloginfo > file

Also, please provide the command line that you are using to start
io-net.

It doesn’t seem to matter what command I use, this was taken using

io-net -dprism verbose=4 -ptcpip.

the output from loginfo is:

Time Sev Major Minor Args
Mar 15 13:38:21 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 15 13:38:21 2 10 0 Prism Start driver failed

The output from pci -v is:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7180h, 82443LX/EX (PAC) Host/PCI bridge in 440LX/EX AGP
chipset
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = a290h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7181h, AGP device in 440LX/EX AGP chipset
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 2a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 22a0h
Memory Base = fff0h
Memory Limit = 0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 2ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB/EB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB/EB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB/EB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = 6400h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB/EB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
Class Codes = 028000h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e6000000h prefetchable 32bit length 4096 enabled
Subsystem Vendor ID = 1186h
Subsystem ID = 3700h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7e02h - 0h

Class = Display (VGA)
Vendor ID = 1013h, Cirrus Logic
Device ID = a8h, CL-GD5434 Alpine GUI Accelerator
PCI index = 0h
Class Codes = 030000h
Revision ID = fch
Bus number = 0
Device number = 12
Function num = 0
Status Reg = 0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e4000000h 32bit length 16777216 enabled
PCI Expansion ROM = e5000000h length 16777216 disabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = no connection




“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c2qf54$860$> 1@inn.qnx.com> …
I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator. See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?



\

“Hugh Brown” <hsbrown@qnx.com> wrote in message
news:c34snr$pf6$1@inn.qnx.com

The minimum requirement for starting the driver is an ssid. Do you specify
an ssid on the command line?

I just tried it with the ssid (it is the wireless network name, correct?
KAFHome in this case.) and it doesn’t make any difference. All of
the errors are exactly the same.

“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c34s4s$p37$> 1@inn.qnx.com> …

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:c349rt$aim$> 1@inn.qnx.com> …
Could you please provide the full ‘pci -v’ output as well as the
output
from
sloginfo after starting the driver in verbose mode as follows:

slay io-net
io-net -dprism verbose=4 -ptcpip
sloginfo > file

Also, please provide the command line that you are using to start
io-net.

It doesn’t seem to matter what command I use, this was taken using

io-net -dprism verbose=4 -ptcpip.

the output from loginfo is:

Time Sev Major Minor Args
Mar 15 13:38:21 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 15 13:38:21 2 10 0 Prism Start driver failed

The output from pci -v is:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7180h, 82443LX/EX (PAC) Host/PCI bridge in 440LX/EX AGP
chipset
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = a290h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7181h, AGP device in 440LX/EX AGP chipset
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 2a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 22a0h
Memory Base = fff0h
Memory Limit = 0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 2ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB/EB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB/EB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB/EB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = 6400h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB/EB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
Class Codes = 028000h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e6000000h prefetchable 32bit length 4096 enabled
Subsystem Vendor ID = 1186h
Subsystem ID = 3700h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7e02h - 0h

Class = Display (VGA)
Vendor ID = 1013h, Cirrus Logic
Device ID = a8h, CL-GD5434 Alpine GUI Accelerator
PCI index = 0h
Class Codes = 030000h
Revision ID = fch
Bus number = 0
Device number = 12
Function num = 0
Status Reg = 0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e4000000h 32bit length 16777216 enabled
PCI Expansion ROM = e5000000h length 16777216 disabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = no connection




“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c2qf54$860$> 1@inn.qnx.com> …
I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card()
failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator. See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?





\

Are you running QNX 6.2.1B?

“Keith A. Flick” <kaflick@sev.org> wrote in message
news:c34u3c$qaf$1@inn.qnx.com

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:c34snr$pf6$> 1@inn.qnx.com> …
The minimum requirement for starting the driver is an ssid. Do you
specify
an ssid on the command line?

I just tried it with the ssid (it is the wireless network name, correct?
KAFHome in this case.) and it doesn’t make any difference. All of
the errors are exactly the same.

“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c34s4s$p37$> 1@inn.qnx.com> …

“Hugh Brown” <> hsbrown@qnx.com> > wrote in message
news:c349rt$aim$> 1@inn.qnx.com> …
Could you please provide the full ‘pci -v’ output as well as the
output
from
sloginfo after starting the driver in verbose mode as follows:

slay io-net
io-net -dprism verbose=4 -ptcpip
sloginfo > file

Also, please provide the command line that you are using to start
io-net.

It doesn’t seem to matter what command I use, this was taken using

io-net -dprism verbose=4 -ptcpip.

the output from loginfo is:

Time Sev Major Minor Args
Mar 15 13:38:21 2 10 0 devn-prism: prism_cfg_card() failed.
Mar 15 13:38:21 2 10 0 Prism Start driver failed

The output from pci -v is:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7180h, 82443LX/EX (PAC) Host/PCI bridge in 440LX/EX
AGP
chipset
PCI index = 0h
Class Codes = 060000h
Revision ID = 3h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = a290h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 10h - 1f000203h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 7181h, AGP device in 440LX/EX AGP chipset
PCI index = 0h
Class Codes = 060400h
Revision ID = 3h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 2a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 22a0h
Memory Base = fff0h
Memory Limit = 0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 2ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 7110h, 82371AB/EB PIIX4 ISA Bridge
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 7111h, 82371AB/EB PIIX4 IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = f000h length 16 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 7112h, 82371AB/EB PIIX4 USB Interface
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 1h
Bus number = 0
Device number = 7
Function num = 2
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI IO Address = 6400h length 32 enabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11

Class = Bridge (Unknown)
Vendor ID = 8086h, Intel Corporation
Device ID = 7113h, 82371AB/EB PIIX4 Power Management Controller
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 0
Device number = 7
Function num = 3
Status Reg = 280h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
Class Codes = 028000h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
PCI Mem Address = e6000000h prefetchable 32bit length 4096 enabled
Subsystem Vendor ID = 1186h
Subsystem ID = 3700h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7e02h - 0h

Class = Display (VGA)
Vendor ID = 1013h, Cirrus Logic
Device ID = a8h, CL-GD5434 Alpine GUI Accelerator
PCI index = 0h
Class Codes = 030000h
Revision ID = fch
Bus number = 0
Device number = 12
Function num = 0
Status Reg = 0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = e4000000h 32bit length 16777216 enabled
PCI Expansion ROM = e5000000h length 16777216 disabled
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = no connection




“Keith A. Flick” <> kaflick@sev.org> > wrote in message
news:c2qf54$860$> 1@inn.qnx.com> …
I wanted to hook my Momentics machine (I am trying it out.)
to my network. The only PCI wireless card listed
on the website is the DLINK DWL-520 (It is listed as
the 3COM DWL-520 but I was told that is an error on
the web site.) so I bought one.

When I try and start the driver I get:

unable to init dll devn-prism:No such device

sloginfo says:

Time Sev Major Minor Args
Mar 11 14:48:47 2 10 0 devn-prism: prism_cfg_card()
failed.
Mar 11 14:48:47 2 10 0 Prism Start driver failed
Mar 11 14:48:47 5 14 0 tcpip starting
Mar 11 14:48:47 3 14 0 Using pseudo random generator.
See
“random” option

pci says:


PCI version = 2.10

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
PCI Mem Address = e6000000h enabled
PCI Int Pin = INT A
Interrupt line = 10

Any suggestions?







\

Was there ever a solution to getting the DWL-520 to work on QNX 6.2.1?
I have Revision E of the card

Here is the results of pci -v

Class = Network (Unknown)
Vendor ID = 1260h, Intersil Corporation
Device ID = 3873h, ISL3874A PRISMII.5 IEE802.11B Wireless LAN
PCI index = 0h
Class Codes = 028000h
Revision ID = 1h
Bus number = 0
Device number = 11
Function num = 0
Status Reg = 290h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Checking disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 8h un-cacheable
PCI Mem Address = ea000000h prefetchable 32bit length 4096 enabled
Subsystem Vendor ID = 1186h
Subsystem ID = 3700h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 7e02h - 0h
Device Dependent Registers:
0x40: 80 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xA0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xB0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xC0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xD0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 7e
0xE0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0xF0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00