Sysadmin Guide?

hello everyone,

I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?

Thanks,
Adam

Adam <ahowell@path.berkeley.edu> wrote:

hello everyone,

I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?

I’ve asked the website people to reinstate it.


Steve Reid stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

Charlie Powell <cwilliamp@yahoo.com> wrote:

Hi,

Please identify the page/link at which one could find this sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6 and
want to determine how best to do that.

It isn’t there yet. :frowning:


Steve Reid stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

Hi,

Please identify the page/link at which one could find this sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6 and
want to determine how best to do that.

Thanks in advance
Charlie

Steve Reid wrote:

Adam <> ahowell@path.berkeley.edu> > wrote:


hello everyone,





I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?



I’ve asked the website people to reinstate it.


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

Ok. Thanks.

Any other suggestions on where to get information on how to get my network
of QNX4 hosted computers converted to a network of QNX6 hosted computers?

Thanks,
Charlie Powell

“Steve Reid” <stever@sreid.ott.qnx.com> wrote in message
news:c50t83$5b9$1@inn.qnx.com

Charlie Powell <> cwilliamp@yahoo.com> > wrote:
Hi,

Please identify the page/link at which one could find this sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6 and
want to determine how best to do that.

It isn’t there yet. > :frowning:


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

“Charlie Powell” <cwilliamp@yahoo.com> wrote in message
news:c5n486$5pd$1@inn.qnx.com

Ok. Thanks.

Any other suggestions on where to get information on how to get my network
of QNX4 hosted computers converted to a network of QNX6 hosted computers?

What do you mean convert? A network is a bunch of wire and cable, the OS is
to some degree irrelavant, unless I misunderstood your question.


Thanks,
Charlie Powell

“Steve Reid” <> stever@sreid.ott.qnx.com> > wrote in message
news:c50t83$5b9$> 1@inn.qnx.com> …
Charlie Powell <> cwilliamp@yahoo.com> > wrote:
Hi,

Please identify the page/link at which one could find this sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6 and
want to determine how best to do that.

It isn’t there yet. > :frowning:


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

Sorry. Let me try again.

By convert I meant the QNX OS of the host computers will be
converted/changed from QNX4 to QNX6. The task is simply a OS change. No
hardware.

We have 50 or so computers running QNX 4.24 and they are connected to our
company’s network. Under QNX4 I need to be concerned with
/etc/config/netmap, /etc/hosts, /etc/netstart and files like this in order
to get the associated computer working with the network and get all the QNX
hosts in a condition to use the network to communicate with each other.

When I change these computers to QNX6, what files do I need to be concerned
about? Does QNX6 also use /etc/config/netmap, /etc/hosts, etc?

I haven’t yet found any QNX documentation that gives me this information.

Thanks in advance,
Charlie



“Mario Charest” postmaster@127.0.0.1 wrote in message
news:c5n8mj$8uh$1@inn.qnx.com

“Charlie Powell” <> cwilliamp@yahoo.com> > wrote in message
news:c5n486$5pd$> 1@inn.qnx.com> …
Ok. Thanks.

Any other suggestions on where to get information on how to get my
network
of QNX4 hosted computers converted to a network of QNX6 hosted
computers?


What do you mean convert? A network is a bunch of wire and cable, the OS
is
to some degree irrelavant, unless I misunderstood your question.


Thanks,
Charlie Powell

“Steve Reid” <> stever@sreid.ott.qnx.com> > wrote in message
news:c50t83$5b9$> 1@inn.qnx.com> …
Charlie Powell <> cwilliamp@yahoo.com> > wrote:
Hi,

Please identify the page/link at which one could find this sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6
and
want to determine how best to do that.

It isn’t there yet. > :frowning:


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

\

“Charlie Powell” <cwilliamp@yahoo.com> wrote in message
news:c5omtv$gne$1@inn.qnx.com

Sorry. Let me try again.

By convert I meant the QNX OS of the host computers will be
converted/changed from QNX4 to QNX6. The task is simply a OS change. No
hardware.

We have 50 or so computers running QNX 4.24 and they are connected to our
company’s network. Under QNX4 I need to be concerned with
/etc/config/netmap, /etc/hosts, /etc/netstart and files like this in order
to get the associated computer working with the network and get all the
QNX
hosts in a condition to use the network to communicate with each other.

When I change these computers to QNX6, what files do I need to be
concerned
about? Does QNX6 also use /etc/config/netmap,

No it’s gone

/etc/hosts, etc?

/etc/host is TCP/IP related, QNX4 and QNX6 share very common TCP/IP stack.

I haven’t yet found any QNX documentation that gives me this information.

Look for QNET (equivalent of FLEET under QNX4). It’s all documented.

Thanks in advance,
Charlie



“Mario Charest” postmaster@127.0.0.1 wrote in message
news:c5n8mj$8uh$> 1@inn.qnx.com> …

“Charlie Powell” <> cwilliamp@yahoo.com> > wrote in message
news:c5n486$5pd$> 1@inn.qnx.com> …
Ok. Thanks.

Any other suggestions on where to get information on how to get my
network
of QNX4 hosted computers converted to a network of QNX6 hosted
computers?


What do you mean convert? A network is a bunch of wire and cable, the
OS
is
to some degree irrelavant, unless I misunderstood your question.


Thanks,
Charlie Powell

“Steve Reid” <> stever@sreid.ott.qnx.com> > wrote in message
news:c50t83$5b9$> 1@inn.qnx.com> …
Charlie Powell <> cwilliamp@yahoo.com> > wrote:
Hi,

Please identify the page/link at which one could find this
sysadmin
guide. I need to convert a network or computers from QNX 4 to QNX6
and
want to determine how best to do that.

It isn’t there yet. > :frowning:


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems



\

“Adam” <ahowell@path.berkeley.edu> a écrit dans le message de
news:c4hj52$9u3$2@inn.qnx.com

hello everyone,

I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?

Thanks,
Adam

I’ve found this, (looks good to me)

http://qnxcs.unomaha.edu/sysadmin/Book4TOC2.html


HTH


dominix

dominix wrote:

“Adam” <> ahowell@path.berkeley.edu> > a écrit dans le message de
news:c4hj52$9u3$> 2@inn.qnx.com> …

hello everyone,

I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?

Thanks,
Adam


I’ve found this, (looks good to me)

http://qnxcs.unomaha.edu/sysadmin/Book4TOC2.html


HTH

AHHH! I’ve been looking for a guide like this since I started using QNX

about a year ago!
Thanks for the link…

Hi,

As of yesterday I can no longer access
http://qnxcs.unomaha.edu/sysadmin/Book4TOC2.html

Anyone else experiencing the problem?
Suppose the owner has purposefully locked us out?
Anyone else have a copy or similar doc?

Thanks,
Charlie

BTW. QNX should really should have that or better available. It was really
helpful.



“dominix” <dominix@despammed.com> wrote in message
news:c6cj5o$f8k$1@inn.qnx.com

“Adam” <> ahowell@path.berkeley.edu> > a écrit dans le message de
news:c4hj52$9u3$> 2@inn.qnx.com> …
hello everyone,

I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?

Thanks,
Adam

I’ve found this, (looks good to me)

http://qnxcs.unomaha.edu/sysadmin/Book4TOC2.html


HTH


dominix

Any news on the web link?

There is also supposed to be a “Users Guide” in 6.3.0. Did this happen? If
so, how do I access it?

Cheers,
Steve

\

“Charlie Powell” <cwilliamp@yahoo.com> wrote in message
news:c50scb$4t1$1@inn.qnx.com
Hi,

Please identify the page/link at which one could find this sysadmin guide. I
need to convert a network or computers from QNX 4 to QNX6 and want to
determine how best to do that.

Thanks in advance
Charlie

Steve Reid wrote:

Adam <ahowell@path.berkeley.edu> wrote:

hello everyone,



I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?


I’ve asked the website people to reinstate it.


Steve Reid stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems

Steve Cobb <steve_cobb0@yahoo.com> wrote:

Any news on the web link?

There is also supposed to be a “Users Guide” in 6.3.0. Did this happen? If
so, how do I access it?

http://www.openqnx.com/index.php?module=PostWrap&page=userguide

Cheers,
Steve

\

“Charlie Powell” <> cwilliamp@yahoo.com> > wrote in message
news:c50scb$4t1$> 1@inn.qnx.com> …
Hi,

Please identify the page/link at which one could find this sysadmin guide. I
need to convert a network or computers from QNX 4 to QNX6 and want to
determine how best to do that.

Thanks in advance
Charlie

Steve Reid wrote:

Adam <> ahowell@path.berkeley.edu> > wrote:

hello everyone,



I remember that there used to be a rough sysadmin guide for QNX/Neutrino
on the QNX website, but it seems to have vanished with the new look.
Is there someone that has a copy or know of a location to find it again?


I’ve asked the website people to reinstate it.


Steve Reid > stever@qnx.com
TechPubs (Technical Publications)
QNX Software Systems