Hello all,
I am a QNX beginner and wanted to access with Phindows 2.0 (WinXP system)
the QNX 6.2 host.
Unfortunately there are problems with Phindows 2.0:
- Some programs those under photon run, show graphic errors or one cannot
see anything.
- When working with the GDB it does not come with the first RUN and
CONTINUE to the desired result. Only after one enters the instruction RUN
again, the GDB seems to work duly. Thanks for your assistance.
Daniel Ehrentraut
“Daniel Ehrentraut” <tt225q@gmx.de> wrote in message
news:ca7ad2$sir$1@inn.qnx.com…
Hello all,
I am a QNX beginner and wanted to access with Phindows 2.0 (WinXP system)
the QNX 6.2 host.
Unfortunately there are problems with Phindows 2.0:
- Some programs those under photon run, show graphic errors or one cannot
see anything.
- When working with the GDB it does not come with the first RUN and
CONTINUE to the desired result. Only after one enters the instruction RUN
again, the GDB seems to work duly. Thanks for your assistance.
Make sure you have the latest version of QNX (QNX6.2.1) as there was some
improvement made to phrelay. Is that the case already?
Daniel Ehrentraut
Mario Charest wrote:
“Daniel Ehrentraut” <> tt225q@gmx.de> > wrote in message
news:ca7ad2$sir$> 1@inn.qnx.com> …
Hello all,
I am a QNX beginner and wanted to access with Phindows 2.0 (WinXP system)
the QNX 6.2 host.
Unfortunately there are problems with Phindows 2.0:
- Some programs those under photon run, show graphic errors or one cannot
see anything.
- When working with the GDB it does not come with the first RUN and
CONTINUE to the desired result. Only after one enters the instruction RUN
again, the GDB seems to work duly. Thanks for your assistance.
Make sure you have the latest version of QNX (QNX6.2.1) as there was some
improvement made to phrelay. Is that the case already?
No, I use QNX 6.2 and I use phrelay of QNX 6.2.
I installed QNX 6.2.1 (N/C) from the side:
http://www.qnx.com/products/eval/index.html and phrelay, as well as
GDB and GCC were missing. Perhaps is it only one update?
Daniel Ehrentraut
“Daniel Ehrentraut” <tt225q@gmx.de> wrote in message
news:ca7tlh$dcg$1@inn.qnx.com…
Mario Charest wrote:
“Daniel Ehrentraut” <> tt225q@gmx.de> > wrote in message
news:ca7ad2$sir$> 1@inn.qnx.com> …
Hello all,
I am a QNX beginner and wanted to access with Phindows 2.0 (WinXP
system)
the QNX 6.2 host.
Unfortunately there are problems with Phindows 2.0:
- Some programs those under photon run, show graphic errors or one
cannot
see anything.
- When working with the GDB it does not come with the first RUN and
CONTINUE to the desired result. Only after one enters the instruction
RUN
again, the GDB seems to work duly. Thanks for your assistance.
Make sure you have the latest version of QNX (QNX6.2.1) as there was
some
improvement made to phrelay. Is that the case already?
No, I use QNX 6.2 and I use phrelay of QNX 6.2.
I installed QNX 6.2.1 (N/C) from the side:
http://www.qnx.com/products/eval/index.html > and phrelay, as well as
GDB and GCC were missing. Perhaps is it only one update?
It’s part of the SE/PE kit. Not available in NC anymore.
Daniel Ehrentraut
\
On 9 Jun 2004 15:29:38 GMT, Daniel Ehrentraut wrote:
Hello all,
I am a QNX beginner and wanted to access with Phindows 2.0 (WinXP system)
the QNX 6.2 host.
Unfortunately there are problems with Phindows 2.0:
- Some programs those under photon run, show graphic errors or one cannot
see anything.
Phindows won’t work with any programs that do ‘direct’ access to the video
hardware. This would include anything that uses video overlays or direct
blitting/scaling of offscreen contexts - and probably anything that uses
the layering/blending or 3D libraries.
Rob Rutherford
Ruzz Technology