Hello,
I have a MPC5200Lite Board and need to access the internet ( because I want
to synchronize several boards with the accurate time from a time server).
My TCP/IP-connection to the host pc is functioning well and there is no
problem with debugging ( I use momentics 6.2.1.b).
I can ping my host pc (192.168.10.4) and I can also ping my qnx target
(192.168.10.102) without problems
But it is not possible to ping any IP adress in the internet.
(A proxy is running on my pc)
op <oparz1@freenet.de> wrote:
o > Hello,
o > I have a MPC5200Lite Board and need to access the internet ( because I want
o > to synchronize several boards with the accurate time from a time server).
o > My TCP/IP-connection to the host pc is functioning well and there is no
o > problem with debugging ( I use momentics 6.2.1.b).
o > I can ping my host pc (192.168.10.4) and I can also ping my qnx target
o > (192.168.10.102) without problems
o > But it is not possible to ping any IP adress in the internet.
o > (A proxy is running on my pc)
o > Thank you
Ha ve you defined a default route?
Does that host have a route back to you?
I have defined a default route, I think the correct adress is the adress of
my pc (192.168.10.4), is that correct?
I have no problems with static ip adresses!!
A few hours later it was possible for me to connect to the internet with the
static internet adress of my laboratory (there is a proxy to the university
net). In my laboratory I can connect to the internet even with dns without
any problems)
But I can not connect to IP adresses from my dial-up network at home!
op <> oparz1@freenet.de> > wrote:
o > Hello,
o > I have a MPC5200Lite Board and need to access the internet ( because I
want
o > to synchronize several boards with the accurate time from a time
server).
o > My TCP/IP-connection to the host pc is functioning well and there is
no
o > problem with debugging ( I use momentics 6.2.1.b).
o > I can ping my host pc (192.168.10.4) and I can also ping my qnx target
o > (192.168.10.102) without problems
o > But it is not possible to ping any IP adress in the internet.
o > (A proxy is running on my pc)
o > Thank you
Ha ve you defined a default route?
Does that host have a route back to you?
I was not successful in connecting my time server (192.53.103.104) over my
dial up network.
I am using CCProxy Demo (youngzsoft.net) on my pc and I have tested the
proxy with a laptop instead of my mpc5200 and it was successful (the test
was with ie-browser)
Maybe I have to edit my etc/services? But what else can I do?
Thanks
I have defined a default route, I think the correct adress is the adress
of
my pc (192.168.10.4), is that correct?
I have no problems with static ip adresses!!
A few hours later it was possible for me to connect to the internet with
the
static internet adress of my laboratory (there is a proxy to the
university
net). In my laboratory I can connect to the internet even with dns
without
any problems)
But I can not connect to IP adresses from my dial-up network at home!
Thanks
“Bill Caroselli” <> qtps@earthlink.net> > schrieb im Newsbeitrag
news:ccm32g$jde$> 7@inn.qnx.com> …
op <> oparz1@freenet.de> > wrote:
o > Hello,
o > I have a MPC5200Lite Board and need to access the internet ( because
I
want
o > to synchronize several boards with the accurate time from a time
server).
o > My TCP/IP-connection to the host pc is functioning well and there is
no
o > problem with debugging ( I use momentics 6.2.1.b).
o > I can ping my host pc (192.168.10.4) and I can also ping my qnx
target
o > (192.168.10.102) without problems
o > But it is not possible to ping any IP adress in the internet.
o > (A proxy is running on my pc)
o > Thank you
Ha ve you defined a default route?
Does that host have a route back to you?