Installation problem: QNX Momentics v6.3 Eval - QNX Neutrino

I wanted to install the QNX into Thinkpad T42 (2373-KA6).
After entering the serial number and telling QNX to delete the current QNX
partition, I get to the following screen:


Restarting driver and mounting filesystem…
Executing devb-eide blk auto=partition eide nobmstr

path=0 - Intel 82801DBM
target=0 lun=0 Direct-Access(0) - HTS548040M9AT00 Rev:MG20
path=1 - Intel 82801DBM
target=0 lun=0 CD-Rom(5) - HL-DT-ST RW/DVD GCC-4242N Rev:
Unable to mount /dev/hd0t79 as /qnxnto.

Partition Installation Aborted!
Please remove installation medium, then reboot your machine.



Please help!

I have tried “F2 - Run from CD” option. It seems OK but I can’t install into
the harddisk.


Best Regards,
WJ

Solved by manual install:
http://www.openqnx.com/PNphpBB2-viewtopic-t3212-.html

I used “activation -l” to enter licence key.

WJ



“Chan WJ” <Y040080@ntu,edu.sg> wrote in message
news:cuksne$rse$1@inn.qnx.com

I wanted to install the QNX into Thinkpad T42 (2373-KA6).
After entering the serial number and telling QNX to delete the current QNX
partition, I get to the following screen:


Restarting driver and mounting filesystem…
Executing devb-eide blk auto=partition eide nobmstr

path=0 - Intel 82801DBM
target=0 lun=0 Direct-Access(0) - HTS548040M9AT00 Rev:MG20
path=1 - Intel 82801DBM
target=0 lun=0 CD-Rom(5) - HL-DT-ST RW/DVD GCC-4242N Rev:
Unable to mount /dev/hd0t79 as /qnxnto.

Partition Installation Aborted!
Please remove installation medium, then reboot your machine.



Please help!

I have tried “F2 - Run from CD” option. It seems OK but I can’t install
into the harddisk.


Best Regards,
WJ