touchscreens

QNX Newsgroups (Archives) qnx.rtos
1

Does qnx6.3 support the Elographics IntelliTouch protocol for touchscreens?
I know qnx4 does.

Any help is appreciated.

Shashank

2

see docs for devi-elo. It supports the Elotouch 10-byte Protocol. The
sources for this driver are in the Input driver DDK if you need any changes.

“Shashank” <sbalijepalli@precitech.com> schrieb im Newsbeitrag
news:cv53qi$7qs$1@inn.qnx.com…

Does qnx6.3 support the Elographics IntelliTouch protocol for
touchscreens?
I know qnx4 does.

Any help is appreciated.

Shashank

\

3

I looked up the documents for devi-elo and it supports only the “smartset”
protocol. I didnt find any documentation as to how it could be used for an
elotouch 10 byte protocol.

Can you provide me a link to this documentation?

Thanks
Shashank



“Martin Nylund” <mnylund@emtrion.de> wrote in message
news:cvc5ar$97b$1@inn.qnx.com…

see docs for devi-elo. It supports the Elotouch 10-byte Protocol. The
sources for this driver are in the Input driver DDK if you need any
changes.

“Shashank” <> sbalijepalli@precitech.com> > schrieb im Newsbeitrag
news:cv53qi$7qs$> 1@inn.qnx.com> …

Does qnx6.3 support the Elographics IntelliTouch protocol for
touchscreens?
I know qnx4 does.

Any help is appreciated.

Shashank



\

4

I don’t know if it’s documented anywhere more closely. Looking at the
sources tells me that the protocol is a 10-byte-protocol and the driver is
for Elotouch touch controllers. Whether its a IntelliTouch or Smartset (or
if these are one and the same thing), don’t know… I guess you just have to
try it.
“Shashank” <sbalijepalli@precitech.com> schrieb im Newsbeitrag
news:cvcimo$jlf$1@inn.qnx.com…

I looked up the documents for devi-elo and it supports only the “smartset”
protocol. I didnt find any documentation as to how it could be used for an
elotouch 10 byte protocol.

Can you provide me a link to this documentation?

Thanks
Shashank



“Martin Nylund” <> mnylund@emtrion.de> > wrote in message
news:cvc5ar$97b$> 1@inn.qnx.com> …
see docs for devi-elo. It supports the Elotouch 10-byte Protocol. The
sources for this driver are in the Input driver DDK if you need any
changes.

“Shashank” <> sbalijepalli@precitech.com> > schrieb im Newsbeitrag
news:cv53qi$7qs$> 1@inn.qnx.com> …

Does qnx6.3 support the Elographics IntelliTouch protocol for
touchscreens?
I know qnx4 does.

Any help is appreciated.

Shashank





\