dear all,
i’m currently studying x11 on x86 series to check its working. completing it successfully later i’m going to start with SH7760. following links from websites i was able to
- uncompress the file properly (XF86-4301-qnx6-bin.tar.gz)
- set binaries and libraries path
- configure using “XFree86 -configure”, and get the file “XF86Config.new”
- copied the same file under /etc/X11 as XF86Config-4 replacing XF86Config-4-sample
finishing all these when i gave the command “startx” or “XFree86 -xf86config /root/XF86Config.new” (i tried it multiple no of times)
i got the following message:
(EE) I810(0) :AGP GART support is not available. Make sure your kernel has agpgart support or that the agpgart kernel module is loaded.
XIO: fatal IO error 254 (Connection reset by peer) on X server “:0.0” after 0 requests (0known processed)with 0 events remaining.
below i’m including some more information about log file, config file, XFree86 and OS version, video hardware in use. please suggest how to recover out of this problem.
if i need to use any other video card please let me know which video card(s) can give support.
regards,
soumyajeet
\
important contents from the log file (/var/log/XFree86.0.log):
XFree86 Version 4.3.0.1
Release date : 9 may 2003
X protocol version 11, revision 0, Release 6.6
Build OS : QNX6
Build date: 17 may 2003
using config file “/etc/X11/XF86Config-4”
I810 : driver for intel integrated graphics chip sets: i810, i810 -dc100, i810e, i815, i830M,
845G, 852GM/855GM, 865G
\
The configure file (/etc/X11/XFconfig-4):
Section “ServerLayout”
Identifier “XFree86 configured”
Screen 0 “Screen0” 0 0
INputDevice “Mouse0” “CorePointer”
InputDevice “Keyboard” “CoreKeyboard”
EndSection
Section “File”
RgbPath “/usr/X11R6/lib/X11/rgb”
ModulePath “/usr/X11R6/lib/X11/modules”
FontPath “/usr/X11R6/lib/X11/fonts/misc/”
FontPath “/usr/X11R6/lib/X11/fonts/Speedo/”
FontPath “/usr/X11R6/lib/X11/fonts/Type1”
FontPath “/usr/X11R6/lib/X11/fonts/CID/”
FontPath “/usr/X11R6/lib/X11/fonts/75dpi/”
FontPath “/usr/X11R6/lib/X11/fonts/100dpi/”
EndSection
Section “Module”
Load “extmod”
Load “glx”
Load “dbe”
Load “record”
Load “xtrap”
Load “speedo”
Load “type1”
EndSection
Section “inputDevice”
Identifier “Keyboard0”
Driver “keyboard”
EndSection
Section “InputDevice”
Identifier “Mouse0”
Driver “mouse”
Option “Protocol” “OSMouse”
Option “device” “/dev/devi/mouse0”
EndSection
Section “Monitor”
#DisplaySize 260 190 #mm
Identifier “Monitor0”
Vendor “SAM”
ModelName “2c33”
Options “DPMS”
EndSection
Section “Device”
Available Driver options are:-
Values: : integer, : float, : “True”/“False”,
: “String”, : " Hz/kHz/MHz"
[arg] : arg optional
#Option “NoAccel” #[]
#Option “SWcursor” #[]
#Option “ColorKey” #
#Option “CacheLines” #
#Option “Dac6Bit” #[]
#Option “DRI” #[]
#Option “NoDDC” #[]
#Option “ShowCache” #[]
#Option “XvMCSurfaces” #
Identifier “Card0”
Driver “i810”
VendorName “Intel Corp.”
BoardName “82810 CGC [Chipset Graphics Controller]”
BusID “PCI:0:1:0”
EndSection
Section “Screen”
Identifier “Screen0”
Device “Card0”
Monitor “Monitor0”
SubSection “Display”
Depth 1
EndSubSection
SubSection “Display”
Depth 4
EndSubSection
SubSection “Display”
Depth 8
EndSubSection
SubSection “Display”
Depth 15
EndSubSection
SubSection “Display”
Depth 16
EndSubSection
SubSection “Display”
Depth 24
EndSubSection
EndSection
XFree86 version:
XFree86 Version 4.3.0.1
Release date : 9 may 2003
X protocol version 11, revision 0, Release 6.6
Build OS : QNX6
Build date: 17 may 2003
Operating System: QNX 6.2.1
\
video hardware in use:
I810 : driver for intel integrated graphics chip sets: i810, i810 -dc100, i810e, i815, i830M,
845G, 852GM/855GM, 865GIndiatimes Email now powered by APIC Advantage. Help!
Help