Hi
We have to install old QNX-software (4.25) for new CPU-card,
because old CPU-card is not longer available.
We are using Photon (GUI) and network (Ethernet TCP/IP) in our software.
New CPU-card is AXIOMTEK SBC84810 Pentium -CPU-card, which have:
- network: Realtek 8100 PCI Bus 10/100M Base-T
- graphics: Integrate Intel 852GM GMCH
Is there exist drivers for these network and graphics ?
Is there exist some “QNX hardware compatible” -pages on the web ?
Esa
Try:
http://www.qnx.com/developers/hardware_support/index.html
Jim
Esa Heikkinen wrote:
Hi
We have to install old QNX-software (4.25) for new CPU-card,
because old CPU-card is not longer available.
We are using Photon (GUI) and network (Ethernet TCP/IP) in our software.
New CPU-card is AXIOMTEK SBC84810 Pentium -CPU-card, which have:
- network: Realtek 8100 PCI Bus 10/100M Base-T
- graphics: Integrate Intel 852GM GMCH
Is there exist drivers for these network and graphics ?
Is there exist some “QNX hardware compatible” -pages on the web ?
Esa
Ok, there are not exactly same chipset for net and video.
But maybe nearest drivers works ?
Where can i find Net.rtl- and Pg.i830-driver?
Esa
“Jim Douglas” <jim@dramatec.co.uk> wrote in message
news:dlll5c$ga5$1@inn.qnx.com…
Try:
http://www.qnx.com/developers/hardware_support/index.html
Jim
Esa Heikkinen wrote:
Hi
We have to install old QNX-software (4.25) for new CPU-card,
because old CPU-card is not longer available.
We are using Photon (GUI) and network (Ethernet TCP/IP) in our software.
New CPU-card is AXIOMTEK SBC84810 Pentium -CPU-card, which have:
- network: Realtek 8100 PCI Bus 10/100M Base-T
- graphics: Integrate Intel 852GM GMCH
Is there exist drivers for these network and graphics ?
Is there exist some “QNX hardware compatible” -pages on the web ?
Esa
Esa Heikkinen wrote:
Ok, there are not exactly same chipset for net and video.
But maybe nearest drivers works ?
Where can i find Net.rtl- and Pg.i830-driver?
http://www.qnx.com/popups/index.html?topic=664
Esa
“Jim Douglas” <> jim@dramatec.co.uk> > wrote in message
news:dlll5c$ga5$> 1@inn.qnx.com> …
Try:
http://www.qnx.com/developers/hardware_support/index.html
Jim
Esa Heikkinen wrote:
Hi
We have to install old QNX-software (4.25) for new CPU-card,
because old CPU-card is not longer available.
We are using Photon (GUI) and network (Ethernet TCP/IP) in our software.
New CPU-card is AXIOMTEK SBC84810 Pentium -CPU-card, which have:
- network: Realtek 8100 PCI Bus 10/100M Base-T
- graphics: Integrate Intel 852GM GMCH
Is there exist drivers for these network and graphics ?
Is there exist some “QNX hardware compatible” -pages on the web ?
Esa
\
QNX4 hardware list is available from the following location:
http://www.qnx.com/developers/hardware_support/qnx4/index.html
- Dave Nickerson
QNX Software Systems
“Jim Douglas” <jim@dramatec.co.uk> wrote in message
news:dlll5c$ga5$1@inn.qnx.com…
Try:
http://www.qnx.com/developers/hardware_support/index.html
Jim
Esa Heikkinen wrote:
Hi
We have to install old QNX-software (4.25) for new CPU-card,
because old CPU-card is not longer available.
We are using Photon (GUI) and network (Ethernet TCP/IP) in our software.
New CPU-card is AXIOMTEK SBC84810 Pentium -CPU-card, which have:
- network: Realtek 8100 PCI Bus 10/100M Base-T
- graphics: Integrate Intel 852GM GMCH
Is there exist drivers for these network and graphics ?
Is there exist some “QNX hardware compatible” -pages on the web ?
Esa