Hi QNX folks!
We have purchased a new video card for our QNX 4 machines, the
ATI Radeon 9250. It will only run on 640x480 resolution. I need to
adjust the resolution to at least 1024x768 for the displays in my
application. Adjusting the resolution at the QNX sysinit.NODE# file
does not help.
I think i have read from previous posting that this chipset is
supported by QNX4. Can somebody please help me on this? A
documentation perhaps on how u were able to configure your machine
for this chipset?
Hello,
Did you try Pg.radeon driver from the latest Photon 1.14 graphics patch?
http://www.qnx.com/download/group.html?programid=8696
QNX 6.3.0 Radeon driver works with Radeon 9250. I hope the things are the same
for the latest QNX 4 driver too… Probably will be needed to add Radeon 9250
PCI ids into /qnx4/graphics/trappers/crttrap.list file.
Regards,
Igor.
nlferrer wrote:
Hi QNX folks!
We have purchased a new video card for our QNX 4 machines, the
ATI Radeon 9250. It will only run on 640x480 resolution. I need to
adjust the resolution to at least 1024x768 for the displays in my
application. Adjusting the resolution at the QNX sysinit.NODE# file
does not help.
I think i have read from previous posting that this chipset is
supported by QNX4. Can somebody please help me on this? A
documentation perhaps on how u were able to configure your machine
for this chipset?
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted.
Our application runs on the QNX Windows graphical interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
Hello,
Those drivers only for Photon GUI only… There is no QNX Windows driver for
last generations of ATI Radeon chips. But our developers offer a workaround for
QNX Windows users. It’s the vbe3 utility, our own-developed analogue of the
standard int10 utility. vbe3 conforms to the VBE3 specifications and supports a
reasonably large list of modern graphics chips, among them
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548
Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver allow to run
QNX Windows on the mentioned graphics chips.
There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate to ask.
Our developer’s contact email address is
Regards,
Igor.
nlferrer wrote:
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted.
Our application runs on the QNX Windows graphical interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
“Igor Mazanov” <i.mazanov@swd.ru> wrote in message
news:e4c5bv$k4e$1@inn.qnx.com…
Hello,
Those drivers only for Photon GUI only… There is no QNX Windows driver
for last generations of ATI Radeon chips. But our developers offer a
workaround for QNX Windows users. It’s the vbe3 utility, our own-developed
analogue of the standard int10 utility. vbe3 conforms to the VBE3
specifications and supports a reasonably large list of modern graphics
chips, among them
QWindows can use Photon drivers.
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver allow
to run QNX Windows on the mentioned graphics chips.There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate to
ask. Our developer’s contact email address isRegards,
Igor.nlferrer wrote:
hi,I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted. Our application runs on the QNX Windows graphical
interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
Mario Charest wrote:
“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4c5bv$k4e$> 1@inn.qnx.com> …Hello,
Those drivers only for Photon GUI only… There is no QNX Windows driver
for last generations of ATI Radeon chips. But our developers offer a
workaround for QNX Windows users. It’s the vbe3 utility, our own-developed
analogue of the standard int10 utility. vbe3 conforms to the VBE3
specifications and supports a reasonably large list of modern graphics
chips, among them
QWindows can use Photon drivers.
Would you please sched the light on this? How could it be done? Over that legacy
beta “QNX Windows in Photon” software?
By the way, the latest version of vbe3 supports ATI Radeon 9250 too.
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver allow
to run QNX Windows on the mentioned graphics chips.There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate to
ask. Our developer’s contact email address isRegards,
Igor.nlferrer wrote:
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted. Our application runs on the QNX Windows graphical
interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
\
“Igor Mazanov” <i.mazanov@swd.ru> wrote in message
news:e4eibf$9qq$1@inn.qnx.com…
Mario Charest wrote:
“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4c5bv$k4e$> 1@inn.qnx.com> …Hello,
Those drivers only for Photon GUI only… There is no QNX Windows driver
for last generations of ATI Radeon chips. But our developers offer a
workaround for QNX Windows users. It’s the vbe3 utility, our
own-developed analogue of the standard int10 utility. vbe3 conforms to
the VBE3 specifications and supports a reasonably large list of modern
graphics chips, among them
QWindows can use Photon drivers.Would you please sched the light on this? How could it be done? Over that
legacy beta “QNX Windows in Photon” software?
QWindows comes with gr.phi, that’s a QWindows driver. It act as a bridge
between QWindows and any photon driver.
That being said maybe vbe3 is faster because it’s a native driver. I never
had a problem with performance using gr.phi.
By the way, the latest version of vbe3 supports ATI Radeon 9250 too.
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver allow
to run QNX Windows on the mentioned graphics chips.There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate to
ask. Our developer’s contact email address isRegards,
Igor.nlferrer wrote:
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted. Our application runs on the QNX Windows graphical
interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
\
“Mario Charest” postmaster@127.0.0.1 wrote in message
news:e4faiu$qs8$1@inn.qnx.com…
“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4eibf$9qq$> 1@inn.qnx.com> …
Mario Charest wrote:
“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4c5bv$k4e$> 1@inn.qnx.com> …Hello,
Those drivers only for Photon GUI only… There is no QNX Windows
driver
for last generations of ATI Radeon chips. But our developers offer a
workaround for QNX Windows users. It’s the vbe3 utility, our
own-developed analogue of the standard int10 utility. vbe3 conforms to
the VBE3 specifications and supports a reasonably large list of modern
graphics chips, among them
QWindows can use Photon drivers.Would you please sched the light on this? How could it be done? Over
that
legacy beta “QNX Windows in Photon” software?QWindows comes with gr.phi, that’s a QWindows driver. It act as a bridge
between QWindows and any photon driver.That being said maybe vbe3 is faster because it’s a native driver. I
never
had a problem with performance using gr.phi.
In regards to this, are there any Photon specific files need which are
included in the last release of Photon drivers on qnx? And any
Photon-specific things to get the gr.phi + photon driver running? Haven’t
actually noticed gr.phi in our installs but will have a good look on our
latest installations. Any idea on when this was included in the QNX cd?
Mainly asking these questions as I am totally Photon illeterate, to the
point of only using it on the install CD and having no licenses. Hoping that
you do not actually need Photon or licenses to get gr.phi running… Will
definately save a lot of headache on keeping some of our legacy systems
running.
By the way, the latest version of vbe3 supports ATI Radeon 9250 too.
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver
allow
to run QNX Windows on the mentioned graphics chips.There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate
to
ask. Our developer’s contact email address isRegards,
Igor.nlferrer wrote:
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted. Our application runs on the QNX Windows graphical
interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what qnx
files/directories will i work with? how do i invoke the graphics
driver?
\
“Creative” <doulgie@NOSPAMoptusnetS.com.au> wrote in message
news:e4fbsj$rhb$1@inn.qnx.com…
“Mario Charest” postmaster@127.0.0.1 wrote in message
news:e4faiu$qs8$> 1@inn.qnx.com> …“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4eibf$9qq$> 1@inn.qnx.com> …
Mario Charest wrote:
“Igor Mazanov” <> i.mazanov@swd.ru> > wrote in message
news:e4c5bv$k4e$> 1@inn.qnx.com> …Hello,
Those drivers only for Photon GUI only… There is no QNX Windows
driver
for last generations of ATI Radeon chips. But our developers offer a
workaround for QNX Windows users. It’s the vbe3 utility, our
own-developed analogue of the standard int10 utility. vbe3 conforms to
the VBE3 specifications and supports a reasonably large list of modern
graphics chips, among them
QWindows can use Photon drivers.Would you please sched the light on this? How could it be done? Over
that
legacy beta “QNX Windows in Photon” software?QWindows comes with gr.phi, that’s a QWindows driver. It act as a bridge
between QWindows and any photon driver.That being said maybe vbe3 is faster because it’s a native driver. I
never
had a problem with performance using gr.phi.
In regards to this, are there any Photon specific files need which are
included in the last release of Photon drivers on qnx? And any
Photon-specific things to get the gr.phi + photon driver running? Haven’t
actually noticed gr.phi in our installs but will have a good look on our
latest installations. Any idea on when this was included in the QNX cd?
I THINK gr.phi which is a QWindows driver is included in QWindows not sure.
Mainly asking these questions as I am totally Photon illeterate, to the
point of only using it on the install CD and having no licenses. Hoping
that
you do not actually need Photon or licenses to get gr.phi running… Will
definately save a lot of headache on keeping some of our legacy systems
running.
You only need the graphics driver and mode switcher, you wouldn’t not be
running Photon, hence I don’t beleive there is a need for a license.
By the way, the latest version of vbe3 supports ATI Radeon 9250 too.
nVidia Riva TNT2
nVidia GeForce (all generations)
ATI Radeon 9200/9600/9800/X700
Intel 815/845/852/855/865
Chip & Technologies 65548Using vbe3 in combination with QNX Windows gr.vesa2 graphics driver
allow
to run QNX Windows on the mentioned graphics chips.There is an info on the internet, but in Russian only,
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=5&artlang=ru
http://www.kpda.ru/faq/index.php?action=artikel&cat=3&id=4&artlang=ru
If you have any questions about this software solution don’t hesitate
to
ask. Our developer’s contact email address isRegards,
Igor.nlferrer wrote:
hi,
I have downloaded the QNX4-graphics_20051115.tar.gz, the sumcheck was
OK, same as posted. Our application runs on the QNX Windows graphical
interface. I think
we wont be using the photon graphical interface. (Unless its the only
solution).
Our application is actually REALFLEX 4. We want to use radeon 9250 or
Intel 82865 chipsets for the graphics adapter of the machines.
Will these downloaded drivers work for my application? If so, what
qnx
files/directories will i work with? how do i invoke the graphics
driver?
\
On Thu, 18 May 2006 14:22:28 +0200, Mario Charest postmaster@127.0.0.1
wrote:
I THINK gr.phi which is a QWindows driver is included in QWindows not
sure.
I believe it’s part of the qwinph package which was never released after
beta
The beta is floating around I believe
As for needing a license, I think you will need to contact your sales rep.
“Alex/Systems 104” <acellarius@yah0o.lsd.com> wrote in message
news:op.s9sc54zebinb6v@alex-pentium-m…
On Thu, 18 May 2006 14:22:28 +0200, Mario Charest <postmaster@127.0.0.1
wrote:
I THINK gr.phi which is a QWindows driver is included in QWindows not
sure.
I believe it’s part of the qwinph package which was never released after
beta
The beta is floating around I believeAs for needing a license, I think you will need to contact your sales rep.
Had a look on one of our QNX Windows servers but couldn’t find gr.phi
anywhere, so I’m assuming is was part of qwinph.
Anybody know if it is available on beta or can anyone send it over this
way??