Net Crashes on Startup...

Gord_Sipko1 · May 21, 2006, 8:44pm

I’m having difficulty with Net, moving to newer HP hardware running under QNX 4.25. The HP hardware uses a SIS900 lan card and when Net.sis9 is started, Net crashes and the machine locks up. In an attempt to sort out the problem, I have disabled the onboard lan card and tried a Realtek 8139 card (which has worked before with other 4.25 systems). The results with the Realtek card are the same as with the SIS900 - crash and lockup!

With both cards installed and the SIS900 enabled in the BIOS, nettrap query shows:
Net.rtl -I0 -l1 &
Net.sis9 -I0 -l2 &

Starting ‘Net.rtl -I0 -l1 &’ results in the following messages:
%1 + 11040 Running Net.rtl -I0 -l1
net_init: qnx_hint_attach, rtl_IrqHdlr.
Send(): Register with Net Manager failed
Version: 4.25Q Jul 18 2005
kernel fault ldt 2b8 fault d+14 IK 0085

(pid 56, ‘//8/bin/Net’)
cs:eip=f0:ea4 ss:esp=f8:14a8 efl=12282 ds=1d ed=1d fs0 gs0
eax/0 ebx/102b8 ecx/1d edx/32cc esi/16140 edi/0 ebp/14bc
Stack (f8:146c)…

If Net is started as ‘Net -v &’, Runtime Error 0035, Runtime Error 0007 messages spew out.

This QNX system has all current patches installed. I have run out of ideas and things to try. Does anyone have some insight into what might be happening?

TIA,
Gord

Hugh_Brown1 · May 25, 2006, 11:54am

Please can you post the output from ‘show_pci -v’ as well as the output from ‘sin ver’.

“Gord Sipko” <mountkidd_AT_shaw_DOT_ca@nospam.com> wrote in message news:e4qjgi$j8n$1@inn.qnx.com…
I’m having difficulty with Net, moving to newer HP hardware running under QNX 4.25. The HP hardware uses a SIS900 lan card and when Net.sis9 is started, Net crashes and the machine locks up. In an attempt to sort out the problem, I have disabled the onboard lan card and tried a Realtek 8139 card (which has worked before with other 4.25 systems). The results with the Realtek card are the same as with the SIS900 - crash and lockup!

With both cards installed and the SIS900 enabled in the BIOS, nettrap query shows:
Net.rtl -I0 -l1 &
Net.sis9 -I0 -l2 &

Starting ‘Net.rtl -I0 -l1 &’ results in the following messages:
%1 + 11040 Running Net.rtl -I0 -l1
net_init: qnx_hint_attach, rtl_IrqHdlr.
Send(): Register with Net Manager failed
Version: 4.25Q Jul 18 2005
kernel fault ldt 2b8 fault d+14 IK 0085

(pid 56, ‘//8/bin/Net’)
cs:eip=f0:ea4 ss:esp=f8:14a8 efl=12282 ds=1d ed=1d fs0 gs0
eax/0 ebx/102b8 ecx/1d edx/32cc esi/16140 edi/0 ebp/14bc
Stack (f8:146c)…

If Net is started as ‘Net -v &’, Runtime Error 0035, Runtime Error 0007 messages spew out.

This QNX system has all current patches installed. I have run out of ideas and things to try. Does anyone have some insight into what might be happening?

TIA,
Gord

Gord_Sipko1 · May 25, 2006, 7:00pm

“Hugh Brown” <hsbrown@qnx.com> wrote in message news:e545qv$8ab$1@inn.qnx.com…
Please can you post the output from ‘show_pci -v’ as well as the output from ‘sin ver’.

Hugh,

Thanks for the response!

QNX was installed from the 2003 Product CD with the E/G updates, plus 2005 posted Updates have also been applied. Hardware is HP552W, P4 2.0 GHz, ASUS P4S-LA, SiS650 chipset.

PROGRAM NAME VERSION DATE
/boot/sys/Proc32 Proc 4.25Q Jul 18 2005
/boot/sys/Proc32 Slib16 4.23G Oct 04 1996
/boot/sys/Slib32 Slib32 4.24B Aug 12 1997
/bin/Fsys Fsys32 4.24Y Apr 23 2002
/bin/Fsys Floppy 4.24B Aug 19 1997
/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Dev32 Dev32 4.23G Oct 04 1996
//8/bin/Pipe Pipe 4.23A Feb 26 1996
//8/bin/Dev32.ansi Dev32.ansi 4.23H Nov 21 1996
//8/bin/Dev32.par Dev32.par 4.25A Jan 08 2001
//8/bin/Dev32.pty Dev32.pty 4.23G Oct 04 1996
//8/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Iso9660fsys Iso9660fsys 4.23D Mar 20 2000
//8/bin/Fatfsys Fatfsys 4.26D Aug 28 2002
//8/bin/io-usb USB 1.00B Nov 14 2005
//8/bin/Net Net 4.25E Apr 24 2002

Net has a Apr 24 2002 datestamp, cksum is 3688333344 32632
Net.rtl has a Sep 30 2002 datestamp, cksum is 1117232992 44997
Net.sis9 has a Sep 19 2002 datestamp, cksum is 114920796 44768

show_pci -v …

PCI version = 2.10

Vendor ID = 1039h, Silicon Integrated
Device ID = 650h,
PCI index = 0h
Class Code = 060000h Bridge (Host/PCI) ProgIF=0
Revision ID = 1h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = MEM@e8000000h,32bit length 67108864
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Vendor ID = 1039h, Silicon Integrated
Device ID = 1h,
PCI index = 0h
Class Code = 060400h Bridge (PCI/PCI) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0
Secondary Bus Number = 1
Subordinate Bus Number = 1
Secondary Latency Timer = 0h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 2000h
Memory Base = e780h
Memory Limit = e7f0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= feb0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 8h
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
PCI index = 0h
Class Code = 060100h Bridge (PCI/ISA) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 200h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 0h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 2
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e7000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 4, INT D
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 1h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e6800000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
PCI index = 0h
Class Code = 010180h Mass Storage (IDE) ProgIF=128
Revision ID = d0h
Bus number = 0
Device number = 2
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO@b800h length 16 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
PCI index = 0h
Class Code = 040100h Multimedia (Audio) ProgIF=0
Revision ID = a0h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a800h length 256 bytes IO@a400h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 806ah
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 3, INT C
Interrupt line = 9
Capabilities Pointer = 48h
Capability ID = 1h
Capabilities = c042h - 0h

Vendor ID = 1039h, Silicon Integrated <<<<< SiS900
Device ID = 900h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 90h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a000h length 256 bytes MEM@e6000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ch
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fe02h - 0h

Vendor ID = 1093h,
Device ID = 70abh,
PCI index = 0h
Class Code = ff0000h Unknown(9fbdh)
Revision ID = 0h
Bus number = 0
Device number = 14
Function num = 0
Status Reg = 280h
Command Reg = 14h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e5800000h,32bit length 4096 MEM@e5000000h,32bit length 4096
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = no connection

Vendor ID = 10ech, <<<< RealTek 8139
Device ID = 8139h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 10h
Bus number = 0
Device number = 16
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@9800h length 256 bytes MEM@e4800000h,32bit length 256
Subsystem Vendor ID = 1259h
Subsystem ID = 2503h
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = f601h - 0h

Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
PCI index = 0h
Class Code = 030000h Display (VGA) ProgIF=0
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Base Address = MEM@f0000000h,Prefetchable,32bit length 134217728 MEM@e7800000h,32bit length 131072 IO@d800h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 11
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

IRQ Routing = bus=1 slot=4 device=0
Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTD Slot2:INTC Slot3:INTB
INTB=3,4,5,7,9,10,11,12 Slot1:INTA Slot2:INTD Slot3:INTC

IRQ Routing = bus=0 motherboard device=2
Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
INTA=3,4,5,7,9,10,11,12
INTB=3,4,5,7,9,10,11,12 Motherboard:INTA
INTC=3,4,5,7,9,10,11,12
INTD=3,4,5,7,9,10,11,12

IRQ Routing = bus=0 motherboard device=3
Vendor ID = 1039h, Silicon Integrated
Device ID = 900h,
INTA=3,4,5,7,9,10,11,12 Motherboard:INTB

IRQ Routing = bus=0 slot=1 device=14
Vendor ID = 1093h,
Device ID = 70abh,
INTA=3,4,5,7,9,10,11,12 Slot4:INTB Slot2:INTD Slot3:INTC
INTB=3,4,5,7,9,10,11,12 Slot2:INTA Slot3:INTD
INTC=3,4,5,7,9,10,11,12 Slot2:INTB Slot3:INTA
INTD=3,4,5,7,9,10,11,12 Slot4:INTA Slot2:INTC Slot3:INTB

IRQ Routing = bus=0 slot=2 device=15
No card configured in slot
INTA=3,4,5,7,9,10,11,12 Slot1:INTB Slot3:INTD
INTB=3,4,5,7,9,10,11,12 Slot1:INTC Slot3:INTA
INTC=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot3:INTB
INTD=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot3:INTC

IRQ Routing = bus=0 slot=3 device=16
Vendor ID = 10ech,
Device ID = 8139h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTC Slot2:INTB
INTB=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot2:INTC
INTC=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot2:INTD
INTD=3,4,5,7,9,10,11,12 Slot1:INTB Slot2:INTA

Hugh_Brown1 · May 26, 2006, 12:01pm

Is there an option to turn off Plug 'n Play in the BIOS? There are no interrupts assigned to either of the network adapters.

“Gord Sipko” <mountkidd_AT_shaw_DOT_ca@nospam.com> wrote in message news:e54utr$p34$1@inn.qnx.com…