Is there any external ethernet or USB controller available for QNX 6.3?
I would appreciate your suggestions.
Shashank
Hello, Shashank!
S> Is there any external ethernet or USB controller available for QNX 6.3?
As for USB did you mean PCI adapters ? Yes, I’m using PCI card which simply
marked “ALi M5237 PCI to USB Open Host Controller” (OHCI/EHCI 4 ports in
dual mode). Due to my Intel PC configuration I’m running io-usb as
io-usb -dehci -dohci -duhci, QNX 6.3 has found all existing ports.
With best regards, Mike Gorchak. E-mail: mike@malva.ua
Hi Mike,
Thanks for the information. Where did you get the card from? I didn’t see it
listed on the Acer Labs website.
Best,
Shashank
“Mike Gorchak” <mike@malva.ua> wrote in message
news:e62vov$6bt$1@inn.qnx.com…
Hello, Shashank!
S> Is there any external ethernet or USB controller available for QNX
6.3?As for USB did you mean PCI adapters ? Yes, I’m using PCI card which
simply
marked “ALi M5237 PCI to USB Open Host Controller” (OHCI/EHCI 4 ports in
dual mode). Due to my Intel PC configuration I’m running io-usb as
io-usb -dehci -dohci -duhci, QNX 6.3 has found all existing ports.With best regards, Mike Gorchak. E-mail: > mike@malva.ua
Hello, Shashank!
S> Thanks for the information. Where did you get the card from? I didn’t
S> see it listed on the Acer Labs website.
Acer Labs is chip manufacturer. PCI Cards manufactured by others.
Check the samples here:
http://tekgems.com/Products/cat-cables-adapter-cards-usb-2.0-pci-cards.htm
My is $9.99 on that page.
P.S. Be carefull they are all wrote about 6+2 ports or 8 ports, but it is
really 4 ports only, because on many cards extension pins are not welded and
riser not included in package. Sometimes they are count EHCI and OHCI ports
standalone but really they are shared the one connector. Damned marketing.
Btw on their photo this card is full with two internal USB connectors and
two on riser (header)
http://tekgems.com/Products/tg-et-20009-ccd-hy200.htm
With best regards, Mike Gorchak. E-mail: mike@malva.ua