io-usb

Hello everybody,

i have one problem, i hope everybody help me to solve this problem.

I have 1 PC setup QNX4.25 (QNX PC) and 1 terminal (terminal i setup QNX
Embedded and have my application in this terminal). I setup terminal can
boot from lan with image in QNX PC. When terminal boot from lan success.
In QNX PC i use on command control application in terminal. and i have
problem with io-usb command.

Example:

In QNX PC i type: on -f2 ls ----> that work OK.
but when i use on with io-usb that: on -f2 io-usb & then in QNX PC i don’r
see this terminal. normal when i not run that command i can use sin net
then i see:


Nid Machine Cpu Fpu Speed Memory Hard Flop Other
1 PCI 1586 1587 61952 393.0M 1.4M TCP
2 PCI 686 687 4145 116.9M 62M


66097 510M 62M
but when i use this command (on -f2 io-usb) and i use sin net command then
i see:

Nid Machine Cpu Fpu Speed Memory Hard Flop Other
1 PCI 1586 1587 61952 393.0M 1.4M TCP


61952 393M 0M

so i don’t control terminal from QNX PC thought on command.

Why ? I hope everybodu help me to solve this problem.

Thank you very mach.