I try to install 3com LAN Network card on my laptop.
I has problem using the card which recognized as memory in QNX 4.25
patch G
pccard -v
11:17:51 18 5 Socket state 80
11:17:51 18 5 Card Inserted
11:17:51 18 5 3.3V Card
11:17:51 18 5 Powered up 2
11:17:51 18 5 Single-function Card
11:17:51 18 5 Window 6 - Socket 1 - Size 0
11:17:51 18 5 State - I/O / Disabled
11:17:51 18 5 Base 0
11:17:51 18 5 Window 4 - Socket 1 - Size 0
11:17:51 18 5 State - Memory / Disabled
11:17:51 18 5 Base 0
00000000: 1303 4349 5320 0401 0157 5204 0603 0100 “…CIS
…WR…”
00000010: 0000 0005 0d41 9a01 b51e 01b5 1e02 30ff
“…A…0.”
00000020: ff01 0706 1100 4000 0000 1534 0500 3343
“…@…4…3C”
00000030: 6f6d 2043 6f72 706f 7261 7469 6f6e 0033 “om
Corporation.3”
00000040: 4343 4645 3537 3543 5400 4c41 4e20 4361
“CCFE575CT.LAN Ca”
00000050: 7264 6275 7320 4361 7264 0030 3034 00ff “rdbus
Card.004…”
00000060: 2102 0601 ffff ffff 8080 19ff ffff ffff
“!..”
11:17:52 18 5 Socket state c0
11:17:52 18 5 Card Inserted
Here is the output of pin config form QNX4
pin config
; socket 2
[device]
pin: unknown or missing card type.
register = 0, 0x40, 0x40 ; level mode interrupts
pin:
pin
Sock Win Type Flags PID Base Size IRQ Base
Size DMA
1 Empty ----MF---------- None
2 0 Memory C—M----------W None - -
Then I try QNX6.
Here is the output of pin config
pin config
; socket 2
[device]
manufacturer = “3Com Corporation”
product = “3CCFE575CT”
info1 = “LAN Cardbus Card”
info2 = “004”
manufacturer = “3Com Corporation”
product = “3CCFE575CT”
info1 = “LAN Cardbus Card”
info2 = “004”
register = 0, 0x40, 0x40 ; level mode interrupts
pin:
pin
Sock Func Type Flags PID Base Size IRQ
1 Empty ----MF---------- None
1 Empty ----MF---------- None
2 0 Network C—I-±–X–SAW 503825 0xfe00 128 6
0xffee0080 128
2 Empty ----MF---------- None